Re: What did you do to your truck today part IV
Quote:
|
Re: What did you do to your truck today part IV
Quote:
That said, I had to do a little engineering of my own, as this kit was designed with a shortbed Chevy in mind, and I'm going a longbed GMC. Depending on your application this could be pretty straight forward, or a little more involved, especially with measuring. I had some issues with quality that I got resolved, and I think were a one-off. My biggest complaint is that while the product seems to be of good quality, the instructions are below standard. They're essentially copies of hand drawings, with handwriting. The first page with some measurement and step info is typed, but any illustrations are back-of-napkin quality. While not altogether a bad thing, when you compare it to something like RideTech's work you can see the difference. That said, Ridetech stuff is also more expensive, so you pay for the extra work :). I would do the No Limit kit again, primarily because I have now done it and know what I'm in for. But ask me again when I'm all done haha. |
Re: What did you do to your truck today part IV
3 Attachment(s)
Painted the new air filter up.
|
Re: What did you do to your truck today part IV
That is a great looking engine TJ! Mine is still pretty crusty. But did get a new red top optima and battery ends today. Got tired of wiggling the wore out old connector lol.
Chris |
Re: What did you do to your truck today part IV
2 Attachment(s)
Filled it up with gas then went and drove it until half of the gas was gone.
|
Re: What did you do to your truck today part IV
Just about ready to pull the motor. Having a 383 built right now.
http://i1101.photobucket.com/albums/...ps3bqd6tw9.jpg |
Re: What did you do to your truck today part IV
3 Attachment(s)
I didn't do it myself, I had it done. It's been warming up out here so I had the windows tinted the other day, kind of on a whim. To be honest, I'm not 100% sure if I like the look on the old beast but it certainly keeps the cab cooler.
|
Re: What did you do to your truck today part IV
5 Attachment(s)
Headlight relay upgrade along with new headlight and dimmer switches.
Attachment 1645060 Attachment 1645061 Dimmer switch bolt had a clutch head so I had to make a bit. Attachment 1645062 Attachment 1645066 Headlight switch gave me back my dash lights, love the red bow tie high beam indicator. She was thirsty so I took her to fill up Attachment 1645064 |
Re: What did you do to your truck today part IV
Quote:
Chris |
Re: What did you do to your truck today part IV
1 Attachment(s)
Friday i got my ram horns.Then i took them to get ceramic coated.Attachment 1645308
|
Re: What did you do to your truck today part IV
3 Attachment(s)
I got new rims but the studs was to short.Installed the new studs panted the drums.Attachment 1645317
Attachment 1645316 Attachment 1645318 |
Re: What did you do to your truck today part IV
1 Attachment(s)
Finished up on friday any installed the rear sway bar.Attachment 1645324
|
Re: What did you do to your truck today part IV
2 Attachment(s)
Saturday and sunday i tore the front suspension off. Then took a break waiting for parts. Then i worked on the 1961 impala frame off resto.Attachment 1645337
Attachment 1645336 |
Re: What did you do to your truck today part IV
3 Attachment(s)
|
Re: What did you do to your truck today part IV
|
Re: What did you do to your truck today part IV
Quote:
|
Re: What did you do to your truck today part IV
4 Attachment(s)
Painted the Chevrolet logo in the tail gate and front bumper with one shot paint.
See before and after pictures. |
Re: What did you do to your truck today part IV
5 Attachment(s)
I installed a Grunion air ride and front disc conversion also painted the frame with POR-15 and added a train horn since I already had the compressor and air tank for the airbags.
It dropped the body about 7 to 8 inches. It's not sitting on the floor but it makes a drastic difference in the look of the truck, for a fraction of the price and work. I am very happy with it. I also had to relocate the mufflers and changed the exhaust tips. SS-7 airbags Gauges and paddles for each bag Compressor 2-1/2 gallon tank All necessary hoses, fittings, and hardware Front and rear Mcgaughy shocks Mcgaughy drop spindles Mcgaughy panhard bar Mcgaughy C notch Mcgaughy 12" Front Disc Brake Kit; 6x5.5 Bolt Pattern with calipers See before and after pictures how she sits |
Re: What did you do to your truck today part IV
Wow much better. I thought those wheels look a little out of place with that much altitude.
|
Re: What did you do to your truck today part IV
I got my truck back from having the 700 r4 installed. I think my drive shaft is hitting my e-brake brackets when I go over bumps so I might have to do some rearranging. Have not got a chance to drive it on the freeway at a reasonable speed to see how it functions. To much traffic:(
|
Re: What did you do to your truck today part IV
5 Attachment(s)
Attachment 1645901
Painted my dash cluster and improved illumination. I used white paint for the back of the aluminium bezel and inside the cluster housing and red on the front of the bezel. The speedo face was a pain to mask off since the needle didn't pop off for me. Attachment 1645902 Attachment 1645903 My wife was really impressed with my skills until i told her the lettering was all still the original! I added a reflector inside around the speedo so the light bounces to the front better. Attachment 1645904 Attachment 1645905 One of these days i'll get the LED replacement bulbs for the lights The PO has butchered the cluster before i got it so i'm not ruining an original |
Re: What did you do to your truck today part IV
...finally completed another project and moved the C10 onto my lift to finish it:
http://i268.photobucket.com/albums/j...pstrvzgloa.jpg |
Re: What did you do to your truck today part IV
3 Attachment(s)
Temporarily install my trim molding to mark out where I had to paint, the applied a few coats of white and about 7 coats of clear.
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Today i got my ram horns back form ceramic coating. I am installing them today.Attachment 1647006
|
Re: What did you do to your truck today part IV
Quote:
|
All times are GMT -4. The time now is 12:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com