Re: project (sweet pea)
5 Attachment(s)
...Firewall is DONE.!!!!!!well after a long morning of some last minute of spot glazing . i sanded the whole firewall down with 180 grit and then some finer 220 grit....then i shot 1 very light coat of etch on the bare metal spots. then followed with a light sanding, 1 light coat of primer. i let that dry for about 5 10 min . 2 more medium coats and one heavy coat.....feels pretty good to get the firewall done...when i first started this i did not think i would have gotten as picky as i did ... you know just a simple shave and that was it...but as i seen the way others did theirs .the ball started rolling and it was a full on shave everything....none the less its done....i will do a final block with some 320 0r 400 seal and shoot some color on it....but that will have to wait for a while....i got to tackle the floor now....Anyways here are a few pics..........Attachment 346804
Attachment 346805 Attachment 346806 Attachment 346807 Attachment 346808 |
Re: project (sweet pea)
5 Attachment(s)
|
Re: project (sweet pea)
That looks like a professional did it. :metal: Great job.
|
Re: project (sweet pea)
coming together nicely.... thats motivation for me to start my bodywork
|
Re: project (sweet pea)
looking good
|
Re: project (sweet pea)
Quote:
thanks jim.....i got a knack for it.....lol well i do it everyday all day |
Re: project (sweet pea)
Looks great... Awesome job.
|
Re: project (sweet pea)
Quote:
|
Re: project (sweet pea)
slick firewall...very slick!
|
Re: project (sweet pea)
Thanks Killer71
|
Re: project (sweet pea)
I went all through your build and must say you do real nice work...Looks great..
|
Re: project (sweet pea)
Really looking good! Lots of work on that firewall, I know...I did mine, many hours. Great job!
|
Re: project (sweet pea)
5 Attachment(s)
well got off work a lil early today...so i decided to get my engine and trans off the stand and the trans off the floor....after about an hour and a half ....i had it all buttoned up....i may have to take it back out to install all the brake lines...but as easy as it was to put in...shouldnt be no big deal.......and now i can at least roll it up to the other garage and keep all the dust and debris from getting into it.....the old sheet i had covering everything had seen better days.....anyways although not done yet .....its in..............Attachment 349179
Attachment 349180 Attachment 349181 Attachment 349182 Attachment 349183 |
Re: project (sweet pea)
that firewall looks incredible. nice job
|
Re: project (sweet pea)
thanks for all the compliments on the firewall....but really it was not that hard....just alot of time..the work aspect of it was easy.........just time consuming.......but none the less THANKS
tony |
Re: project (sweet pea)
Very nice Bro and I'm curious about before pics of your truck if you can , I'm wanting to see the back of your box.
ps..Max sends his love ; he says SWAT |
Re: project (sweet pea)
thanks Richard...H......yeah i got some not very good before pics......i will email em to ya...lol....NO COMMENT on Max.........thats one sick pup........
|
Re: project (sweet pea)
i finally sat down and read everything on this build. Not too shabby.
You need to get it goin though man... I don't want you folloing my cool ass burb in some booring commuter car to Tn! |
Re: project (sweet pea)
Nice work, cool build thread. Keep the progress comming.
|
Re: project (sweet pea)
Quote:
Thanks and Dude i am trying to get it done for the meet....but done RIGHT ..trust me i sooooooo want to drive it there....but i cant rush it and skip things and or half a$$ things...... |
Re: project (sweet pea)
sure you can!
|
Re: project (sweet pea)
lol i might be able to....although i have this buddy that lives in ohio...maybe he could come on down and help getr done..........lol
|
Re: project (sweet pea)
Awesome work man! And love the Dimebag avatar!
|
Re: project (sweet pea)
4 Attachment(s)
well some small updates... got the driver side floor cut out and the new piece all welded in ...also got the driver side floor support in .and the lower fender mount in....was pretty easy ,just time consuming to let all the welds cool to prevent any warping....i still got a little....but i will try and get it to shrink best i can....there is no tin canning but there is one high spot i dont like....i did coat everything before and after welding with a high Zinc Weld through primer ..its from Wurth..its called alumi-zinc...its great stuff....tomorrow i hope to get the driver side rear floor cut out and the new floor support in...we will see how it goes.....i think i am getting the flu..:waah:Attachment 352424
Attachment 352425 Attachment 352426 Attachment 352427..anyways here are a few update pics......... tony |
Re: project (sweet pea)
2 Attachment(s)
|
All times are GMT -4. The time now is 02:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com