![]() |
Re: 67 SWB 4x4
Quote:
|
Re: 67 SWB 4x4
We are scattering my 70 today.
It will be under project name Road Toad, 70 SWB 292 Step. Need to find a 6 cyl tach dash, 292 PS pump and brackets, etc. This one will be my daughter's. |
Re: 67 SWB 4x4
Why is that family and friends seem to always hate the truck? Crazy.
Looks great and I look forward to seeing it finished. |
Re: 67 SWB 4x4
My first one got three 1st places in the only show it was in, so they kind of calmed down a little, till we started the third one.......
|
Re: 67 SWB 4x4
Quote:
|
Re: 67 SWB 4x4
It is suppose to be 4" but the rear is closer to 6".
I am going to remove the overload springs and it will drop another inch. Also a full 35 gallon tank will drop it another inch. |
Re: 67 SWB 4x4
I'm really excited to see the finish product on this truck. Its looking like it will be my favorite truck on this board. And im now 100% sold on buying a 67-68 SWB 4x4 project. Awesome work!
|
Re: 67 SWB 4x4
Thank you for the kind words.
It is very close. Waiting on some upholstery corrections then I think it wil be down to a punch list. |
Re: 67 SWB 4x4
3 Attachment(s)
Installed the new carpet, shift knobs, and both buddy buckets. We have not painted the console box yet.
Seats need to be steamed or the truck parked in the sun for a day to get the wrinkles out. |
Re: 67 SWB 4x4
very nice truck...looks like it's coming along very nicely...sent ya a pm about some spring information for the rear
|
Re: 67 SWB 4x4
That sure does pretty.:D
|
Re: 67 SWB 4x4
cool build
|
Re: 67 SWB 4x4
I hope mine will look this nice when im done. good job man! ;)
|
Re: 67 SWB 4x4
The interior is coming along nicely.
|
Re: 67 SWB 4x4
Hi Mike, looking great. Who did you get your carpet through? Dennis
|
Re: 67 SWB 4x4
5 Attachment(s)
I did not Raptor the console yet.
For now I cut a piece of carpet and stuck it in there. Dennis, got the carpet through Auto Custom Carpets. This is vette carpet. If you order from them, tell them to leave the carpet in the mold until the mold cools. This carpet fit like a glove, I mean it was damn near perfect, and it was trimmed on the back and sides, excellent. The picgtures don't do it justice, it is the exact same color as the truck. I got the matching floor mats also, and enough to do the back panel. We will add a small piece along the very top of the firewall since it is tall enough you can see up in there. I hope to get the exhaust run Tuesday and then start this thing. Car show this weekend, and we still have the one piece windows to install. |
Re: 67 SWB 4x4
5 Attachment(s)
We got the mufflers run yesterday.
Flowmaster 40s. Stopping right past the cab. Sure looked good on the back of the tow truck. We wanted to start it today, but the new radiator had a seam defect in it. Napa wanted to exchange it for a plastic radiator, and I said no go, found one at Reily's. |
Re: 67 SWB 4x4
Truck looks great.
|
Re: 67 SWB 4x4
4 Attachment(s)
Well here is the difference between a 4" lift and a 5.5/5" drop.
I really need a good set of trim rings for the rims, or maybe a set of chrome rallys for the 4x4. The truck runs and drives, needs front end alignment and a final tune. I will install the one piece windows this weekend, then go through a punch list of things to complete. |
Re: 67 SWB 4x4
Quote:
|
Re: 67 SWB 4x4
nice...
|
Re: 67 SWB 4x4
nice set of twins you got there...that's my plan to have 2 of the same year, one lifted and after i finish my 4x4 do a street truck...very nice job bro
|
Re: 67 SWB 4x4
Little truck has 17 & 18"
My plan is to mess with people, driving one then the other telling them I am just changing the tires and springs......... |
Re: 67 SWB 4x4
sweet!
|
Re: 67 SWB 4x4
1 Attachment(s)
Finally got the door back on after installing the one piece windows.
It is a ***** to modify the hinge on the car, so we pulled most of the front end off to do it right. I make some mods so they do not rattle when you slam the door. The passenger door is kicking our butt about lining up....... |
All times are GMT -4. The time now is 10:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com