|
Re: My crewcab 4x4 cummins project
2 Attachment(s)
well i got the stock grill fitting over the intercooler which is nice i wanted to run a stock grill.....the last truck i made one....and the rear bumper is finally don except grinding and holes drilled for clevises
|
Re: My crewcab 4x4 cummins project
This build is F***ing awesome!
Love the bumpers! |
Re: My crewcab 4x4 cummins project
2 Attachment(s)
well ive been getting a little bit of work done lately...i got mt crossover steering in that i picked up from northwest fab in BC....very nice kit it deletes the springs over the king pins...swaped the 4wd box out to a 2wd unit...also started shaving the fuse box hole in the dash. Im going to put the box under the dash n run the wires for the lights n horn threw the inside of the fender and the wires for the engine will come out behind the motor to keep things a little cleaner...
|
Re: My crewcab 4x4 cummins project
sweeett!! your fab work on the bumpers look awesome.
|
Re: My crewcab 4x4 cummins project
2 Attachment(s)
well ive been picking away ar rust repair when i have time....ive also picked up side work doing bumpers for local guys... just wanted to show the most recent one its for a 04 superduty... all cash for the bumpers goes in the crew cab when i have time... got a few new peices today...steering box brace kit, new bushings for the clutch n break pedal... got new head lights n markers, new box side... slowly working on getting all the new panels...heres the ford bumper i built
|
Re: My crewcab 4x4 cummins project
2 Attachment(s)
well ive been slowly doing some rust repair..cut out the rockers and inner rockers gettin a few hours in on them here n there... got a friend of mine to bend up some rear inners...
|
Re: My crewcab 4x4 cummins project
Subscribed!
|
Re: My crewcab 4x4 cummins project
Thanks For the Heads Up on the Cross-member
|
Re: My crewcab 4x4 cummins project
Great work man, looks killer!
|
Re: My crewcab 4x4 cummins project
those bumpers are beefy
|
Re: My crewcab 4x4 cummins project
Very cool man! Those bumpers look awesome!
|
Re: My crewcab 4x4 cummins project
Did you find replacement rear rockers of are you just patching with what you have? I really need to find a Cummins for mine... Ryan, you there buddy?:lol:
|
Re: My crewcab 4x4 cummins project
Yep, and I was just in Ky and Tn. :lol:
|
Re: My crewcab 4x4 cummins project
Quote:
Posted via Mobile Device |
Re: My crewcab 4x4 cummins project
Bad ass truck your building! I plan on building some bumpers something like yours for my trucks, great job on them too!
|
Re: My crewcab 4x4 cummins project
2 Attachment(s)
been working on the body a little bit...got the inners n outter rockers in and cab corners on the driver side so far...the emblem holes on the cab all welded shut and smoothed...box is torn off n waiting for my attention...slowly but its coming...
|
Re: My crewcab 4x4 cummins project
Have you had any luck making any progress on this one?
|
Re: My crewcab 4x4 cummins project
Quote:
Posted via Mobile Device |
Re: My crewcab 4x4 cummins project
Well good luck with the house man!
|
Re: My crewcab 4x4 cummins project
It is a lot like my truck I have a 1984 Crew Cab with cummins Nv4500 Trans and 205 transfercase that has 2005 Silverado Seats in it I love the cummins pretty simple to put in. i should do a thread on it when I get time I am working on interior trim right now and have to do body and paint but I have no rust on the truck
|
Re: My crewcab 4x4 cummins project
well im going to get back to work on the old truck... friend of mine has a small shop he rented and were gonna split it and get back to the old beer drinkin n car/truck building... i recently sold my 86 short box...pretty much gave it away but now its time to get back at the crew.... i picked up a ratty short box for 200 bucks so i can get the frame chopped... also may as well fit the cut out flares on rusty fenders before i cut up good ones... ill be working on alot of steel fab work for now including a set of steps wheel well to wheel well... also i wanted to put stacks in but opted away from it so i plan on fabbing up a headache rack with 5" stacks built in to it... the point of the build is to be heavy duty... also going to change up the front bumper a little bit...
QUESTION... 4x4 guys what is the minimum shaft length i can use between my transmission and divorced 205... reason being ide like the make the rear drive shaft angles a little less drastic with the big lift...i was tinking on going down to about a 4-5 inch shaft... looking forward to getting back at the old truck nd all the feedback. it will be a week or two before i get it moved over to the shop .. |
Re: My crewcab 4x4 cummins project
Glad to hear it!!
I don't think there is a minimum length, as long as you have enough angle to keep the u joints lubed... Posted via Mobile Device |
Re: My crewcab 4x4 cummins project
4 Attachment(s)
well truck should be moved this coming weekend... cant wait to get back at it...picked up a short box for it and a friend of mine has a 76 parts truck so i took the hedlight bezels and grill trim. lower filler panel since mine was bent a bit. got the gaugle bezel out of it being it was a 6.2 it had the wait to start light so it will work nice in mine... also took the rear slider window and a few misc things... ive never seen one until now but it had factory buckets and consol and they were mint shape but already been spoken for...
also im into motorcycles and own a 06 victory king pin and decided to freshen it up over the winter with some new bits and pieces that are seeing some wear, also repainted and airbrushing started... thought ide share a few pictures of the bikes art so far... |
Re: My crewcab 4x4 cummins project
Great to hear you'll be able to get to work on it again! Did you do that air brushing? That is fricken awesome dude!
|
Re: My crewcab 4x4 cummins project
yeah pretty excited to get back at it....and no im not doing the airbrushing on my bike... good friend of mine is doing it... shes been airbrushing for a long time and her husband does auto body... only thing i did was shave the licence plate mounts off the rear fender and the body work so it will be smooth as glass. its a good test to see if i want to get her to do some stuff on my truck...lol yeah shes going to do it to when it comes time
|
| All times are GMT -4. The time now is 08:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com