Re: Farm Fresh Silverado
Quote:
|
Re: Farm Fresh Silverado
No updates in a while, been trying to buy a house all year, got into one a couple months ago. Took a while to get a trailer to haul my truck over. Don't know how much I'm going to get done this year, but I'm hoping to get it back on the streets next spring.
|
Re: Farm Fresh Silverado
1 Attachment(s)
I have a 20x30 shop now. Had to measure my truck before I put an offer in, to make sure it was going to fit. LOL I'm happy though, even if I can't walk all the way around it.
|
Re: Farm Fresh Silverado
Congratulations. Shop looks big til the truck gets in, haha. Good luck with your driveline angle dilemma. I don't have any experience to pass along.
|
Re: Farm Fresh Silverado
1 Attachment(s)
Well the truck has been on the back burner for a while, but 3 months after ordering my KP Components cantilever 6-link just showed up!
|
Re: Farm Fresh Silverado
2 Attachment(s)
And apparently I haven’t updated for longer than I thought. I did get the front bags in, but forgot to post.
|
Re: Farm Fresh Silverado
Good looking truck!
|
Re: Farm Fresh Silverado
Quote:
|
Re: Farm Fresh Silverado
Also, love your ride! My suburban and your truck are twins!
|
Re: Farm Fresh Silverado
Good to see you back. Glad to see that the truck is alive and still kickin. Are your tires 235/75-r15s?
|
Re: Farm Fresh Silverado
Quote:
|
Re: Farm Fresh Silverado
Cool, thanks.
|
Re: Farm Fresh Silverado
2 Attachment(s)
Picked up a 2000 K2500 that needed/still needs some TLC. So the 87 got put on the back burner for a few months. But I got the bed pulled back off of it and plan on getting started on the 4-link here soon.
|
Re: Farm Fresh Silverado
1 Attachment(s)
Little update. Got all the hangers and brackets and stuff out of the way.
|
Re: Farm Fresh Silverado
Looks like fun, I'll follow.
|
Re: Farm Fresh Silverado
3 Attachment(s)
Little update. Got the 4-link and cantilever bars in. Still need to weld in the big notch and locate the panhard.
|
Re: Farm Fresh Silverado
1 Attachment(s)
Slowly, but still working on it.
|
Re: Farm Fresh Silverado
Clean work! That looks serious. That notch looks like something that came out of a bank vault.
|
Re: Farm Fresh Silverado
Quote:
|
Re: Farm Fresh Silverado
1 Attachment(s)
Another minor update. Mostly welded and time to cut the frame out.
|
Re: Farm Fresh Silverado
That setup looks like it would ride a lot nicer than the leaf springs. But I guess I don't really know how bagged trucks ride. I assume they ride okay or maybe even nice if they're not at maximum or minimum height. But that suspension geometry looks like it would make the truck comfortable to drive. And I suppose with the bags, you still have good load carrying capacity.
|
Re: Farm Fresh Silverado
Quote:
The 6-link is supposed to be even better. I looked into one years ago when I had my '74. In the end, they're not rated to carry a load & I use my truck as a truck so a 4-bar or Truck-Arm set-up was the way to go. |
Re: Farm Fresh Silverado
Quote:
|
Re: Farm Fresh Silverado
1 Attachment(s)
Today’s update. Welded and painted. I’ll give it another coat tomorrow, then start working on the notch for the driveshaft and getting the panhard bar set up.
|
Re: Farm Fresh Silverado
2 Attachment(s)
Sorry for all the minor updates, I’m just getting a little excited.
|
All times are GMT -4. The time now is 03:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com