The 1947 - Present Chevrolet & GMC Truck Message Board Network - MO Parting out 67 C20, very well optioned.

Page 4 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MO Parting out 67 C20, very well optioned. (https://67-72chevytrucks.com/vboard/showthread.php?t=749461)

Never enough

11-07-2017 09:04 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8072857)

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...;)

Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

DoneonOT

11-07-2017 10:49 AM

Re: Parting out 67 C20, very well optioned.

Interior door handles? Do you have any?

Jeff's bowtie's

11-07-2017 11:05 AM

Re: Parting out 67 C20, very well optioned.

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

specialtyretail

11-07-2017 11:44 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077148)

Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

Great, glad to hear it. Thanks, Fred.

specialtyretail

11-07-2017 11:45 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by DoneonOT (Post 8077222)

Interior door handles? Do you have any?

I MAY have some odd and ends lying around. Nothing nice though. Thanks, Fred.

specialtyretail

11-07-2017 11:46 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Jeff's bowtie's (Post 8077228)

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

dfwright

11-07-2017 05:46 PM

Re: Parting out 67 C20, very well optioned.

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

specialtyretail

11-07-2017 06:46 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by dfwright (Post 8077454)

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

Yes sir, if i find a good one, you will be the first to know. Thanks, Fred.

Never enough

11-07-2017 06:54 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8077243)

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

C30 have fender emblems ?

specialtyretail

11-07-2017 07:49 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

I will look Wednesday. Thanks, Fred.

inline67c20

11-08-2017 05:02 PM

Re: Parting out 67 C20, very well optioned.

Fred, could I get the ram horns and heat shields

specialtyretail

11-08-2017 05:29 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by inline67c20 (Post 8078156)

Fred, could I get the ram horns and heat shields

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

inline67c20

11-08-2017 05:56 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8078167)

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

I am not in big hurry, when you get to them would be fine.

greywurm

11-08-2017 10:52 PM

Re: Parting out 67 C20, very well optioned.

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

unclefreddy

11-09-2017 06:23 PM

Re: Parting out 67 C20, very well optioned.

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

specialtyretail

11-10-2017 12:44 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by greywurm (Post 8078377)

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

specialtyretail

11-10-2017 07:55 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

greywurm

11-10-2017 09:00 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8079172)

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

That is fine. Thanks.

unclefreddy

11-11-2017 12:23 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by unclefreddy (Post 8078928)

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

I also need the spacer for the ignition switch (1967) :)

specialtyretail

11-13-2017 01:52 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Jeff's bowtie's (Post 8077228)

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

I checked, I cannot help you. Thanks, Fred.

Jeff's bowtie's

11-13-2017 02:40 PM

Re: Parting out 67 C20, very well optioned.

Ok thanks anyway Fred

greywurm

11-14-2017 01:01 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8079172)

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

Just checking if you had a chance. Thanks.

specialtyretail

11-14-2017 03:37 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by greywurm (Post 8082255)

Just checking if you had a chance. Thanks.

I did, it does, now I just need to find my air chisel. Looks like it may be an issue getting to it, but I think i can get it done.

greywurm

11-14-2017 03:57 PM

Re: Parting out 67 C20, very well optioned.

Ok. Great. I'm not in a rush, just having a real hard time tracking that part down. Thanks again... I'll be patiently following the thread.

Never enough

11-15-2017 08:57 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

Quote:

Originally Posted by specialtyretail (Post 8079646)

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

Did you get time to look at these ?
Thanks

All times are GMT -4. The time now is 04:51 PM.

Page 4 of 6

Show 40 post(s) from this thread on one page