Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Slowed over the past month or so due to a demanding class and lots of OT at work. I managed to get out there twice in that time including a few hours today. I'll be back out there tomorrow and my next post will include an update/pics.
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
i know the feeling. been slow on my projects too. work changed up my schedule. but if i had the opportunity to get OT i would be all over that as well. especially in this time of economic hardship you have to take what ever is offered to you. i've only been able to swing 3-4 hrs here and there on my swap. should be updating that tomorrow hopefully.
Keep us posted FF. |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
subscribing to this unbelievable awesomerrific project.
one thing I would do differently though is the wheels. I would go with some plain steelies to thwart off suspicion at stop lights. |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
Here's what I've been up to. With three of the four brackets tacked to the rear end as mocked up in the car I chose to do the fourth one out on the stands due to the more difficult fitting required by the overlap onto the diff housing. Here's that tacked in place: http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 Rear back in place and "frame" marked for C-Notches: http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Then, since my degree finder was loaned out, I moved back to the front.
This is a template of the S2000 frame rail with wheel center and rack center positions marked. The rack center is pretty far back and requires the engine to set back further than I had initially expected: http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 This gave me a good excuse to get the engine set back as far as possible. I had a couple inches left at the firewall but the intake was the limiter: http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 Intake plenum cleaned up a bit (unused mounting bossed removed): http://i6.photobucket.com/albums/y23...g?t=1240759723 Spacial conflict resolved. You can see that the throttle pedal arm shape works out perfectly for this: http://i6.photobucket.com/albums/y23...g?t=1240759723 The engine went in and back out again and more material was freed: http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
As much as I like footbox cooling air I decided to put some metal back:
http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 http://i6.photobucket.com/albums/y23...g?t=1240759723 There's a little more clean-up to do on that piece and then I'll fill in the section below it. |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
so I doubt they have pre made C-notches for that car right??? :lol:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Cool. Looks like progress.
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
wow......
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
This is one of my favorite builds. I am in awe, very cool.
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Thanks for the updates!
You are awe inspiring!:metal::metal: Can't wait to see the finished car! |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
i wish i could edit my last post. but here's what it is. it's a dodge caliber. one on ebay for the look. 17x 6.5 wheels.
http://cgi.ebay.com/ebaymotors/2007-...3A1|240%3A1318 also there are durango wheels same size, but wider at 7.5 http://cgi.ebay.com/ebaymotors/17-DO...3A1|240%3A1318 some of the 1500 trucks are 7" so if your bolt pattern are the same then that might be up your alley. a good score would be craigslist or local wrecking yard. |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
hey FF,
here's one in your neck of the woods ;) http://portland.craigslist.org/clc/pts/1136154529.html sorry i have a habit of checking out craigslist in areas i have friends living in. i saw a nice plasma cutter in portland that i had my friend go check out for me. |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Test fit With about 3/8" clearance I will definitely need poly mounts:
http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
FF the fabrication skills you have just amazes me. I wish I was half that good, you are truly an artist with metal.
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Got the rear links done (shown tacked but they are final welded):
http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 I also discovered that the pumpkin was hitting the body at the same time as the axle tubes were hitting the pinch welds. So I chose to simply shave the pinch welds for now, which gave me about +3/4" clearance. Later, if I need more room I can C-Notch it and add a dome over the pumpkin. http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 http://i6.photobucket.com/albums/y23...g?t=1241118678 |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
coming along awesome FF. i would figure you would go with solid mounts for the engine? do they make poly mounts or are you going to fab some up?
also your SIG needs updating... shows updated 3/26 on the sunbeam |
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
So let me get this straight, all of the engine (except acc.) will sit behind the front wheels centerline? That will be a freaking riot to drive...
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Quote:
Quote:
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
FF looking back through your thread, i just noticed that you have the master cylinder on it's side. are you planning to run a remote tank? and how did you calculate the brake pedal pin location? without the booster so that the brakes won't be too hard to use?
|
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
Amazing build! That thing is going to fly. I have an S2000 stock and it moves like you wouldn't believe. WOW.
|
All times are GMT -4. The time now is 12:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com