Re: my 68 shortbed build
so i havent done too much to the truck lately but it should be getting another coat of primer to the interior this weekend and then paint for door jams
|
Re: my 68 shortbed build
Cstm, what are those seats out of?
|
Re: my 68 shortbed build
Quote:
http://store.summitracing.com/partde...5&autoview=sku i had to make my own brakets to lift the off the floor about 3 1/2 inches |
Re: my 68 shortbed build
not too much progress but the cab is ready for paint !!
also i picked up some 15/9 wheels and a couple sets of goodyear eagle drag slicks to burn off and play around with!! ill get some pics soon |
Re: my 68 shortbed build
i bought a saginaw 4 speed for the truck today. it in great shape, just needs some cleaning up.
ill post some pics later tonight any idea of what linkage will work with this trans in a 68 ? |
Re: my 68 shortbed build
3 Attachment(s)
heres the tranny
im gunna try to use this shifter. http://store.summitracing.com/partde...5&autoview=sku |
Re: my 68 shortbed build
ive also decided to shave the tail gate handle
anyone know of a good place to get the relocation kit? |
Re: my 68 shortbed build
so herd of an idea for uning seat belt latches on the inside of the bed as a tailgate latch for shaving the handle.
ill post pics when i get started on it |
Re: my 68 shortbed build
4 Attachment(s)
here is a littl bit of my new tailgate latches
i used a set of seatbelts from my parts truck i need one more of the silver parts that go into the latch if any one has one, i was short one and had to make my own until i can find one |
Re: my 68 shortbed build
i also cut a peice out of a scrap tailgate from the parts truck to use as a filler pannel on the outside for shaving the handle
|
Re: my 68 shortbed build
Quote:
|
Re: my 68 shortbed build
i was thinking about that kit but decided to make my own latches
|
Re: my 68 shortbed build
4 Attachment(s)
so i got the latches on today and that work great!!! just need some fine tuning. also i got my filler piece welded in on the tailgate.
let me know what you think heres some pics |
Re: my 68 shortbed build
1 Attachment(s)
one more
|
Re: my 68 shortbed build
any feedback???
|
Re: my 68 shortbed build
looking good keep up the work!! :metal:
|
Re: my 68 shortbed build
Quote:
|
Re: my 68 shortbed build
so i pulled my old 3 speed out and hope to be puting the 4 speed in
in the next week or two !!! |
Re: my 68 shortbed build
2 Attachment(s)
so i got the input bearing retainer changed out so now my 4 speed with adapt to me bellhousing. then i took it to work and filles it with 90w and got my shifter oon and shifting great.
next step= install also i got some new flowmaster super 40's |
Re: my 68 shortbed build
1 Attachment(s)
so i cleaned up how my new taligate latches bot the the bed.
the did have a bolt welded to the inside of the bed and then a nes screwed on to that. now i have changed it so it is more like the way factory style stuff bolts on. i took some washers and nuts and welded the a nut the the washer. then i cut a round hole in the stake post i the bed. the i welded the washer into the hole so it was flush and the nut was on the inside. i think it will give the larches a more clean look. |
Re: my 68 shortbed build
3 Attachment(s)
other pics
|
Re: my 68 shortbed build
You must be a subscribing member to make a What's it Worth" post.
|
Re: my 68 shortbed build
so ive been looking into build in my extral 12 bolt, i will be converting it to 5 lug with a 3.73 posi and disc brakes. thanks to other board members i have found the disc parts combo that i will use and looked into that at work where i can get the parts at my discount :) also i have found that summit has the axels ans posi. this should start once the tranny is in !!!
|
Re: my 68 shortbed build
3 Attachment(s)
today i got the 4 speed in and im going to try to get the linkage set up tomarow after school and then take it and put it on a lift at work to adjust everything
|
Re: my 68 shortbed build
If you don't mind me asking, what are you estimating for the rear end rebuild? Posi, 5 lug, disc brakes - all sounds like what I'd like to do.
|
All times are GMT -4. The time now is 11:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com