Re: Rottenwood Garages C50 Hauler project about to begin!
 

Getting closer to Street Rod Nationals...Louisville here we come!! 4 new rear tires arrived today and the Vintage air kit is installed and working out well!!!
Checking out front suspension components tomorrow and then taking in in for an alignment.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Looking good! Which vintage air kit is that?

-Richard

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Compact 2. Its about the only thing I found that will actually fit. Even the under dash kits were too big due to the lack of room under the dash of these medium duties.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Very cool build! You've got me eyeballin' all the old grain trucks around here.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Thanks for the info, air conditioning is one of the things I want to add to my c50 once it is on the road. Room in the cab has been a concern I've had all along.

-Richard

Re: Rottenwood Garages C50 Hauler project about to begin!
 

You will loose all of your glove box.. Do NOT order the compact kit from Southern Air. It wont work.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Old Air Products has what you need, look them up!

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Great info guys, thanks!

Re: Rottenwood Garages C50 Hauler project about to begin!
 

I have used Old Air too. Each company has their pros and cons. Actually had trouble with both the Vintage and Old systems and had to return one and have replacement parts for the other. Old Air customer service was lacking.

Remember to buy a small unit as there is no room under a medium duty. You will also have to delete your passenger air vent if you are going with this style.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

We are finishing up the small things for our trip to Louisville to the Street Rod Nationals. I got the rear wheel simulators on, the one needed lower ball joint is going in today and an alignment will come this week. New tires all the way around, air horns hooked up, trans temp and back up fuel gauge wired and the bed extension and headache rack converted to bumper stop has been roughed in.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Here is the route I choose for my 1979 C 70. Most everything off a pickup will work except for the under dash unit. It is a little different due to the hump. You would just need to look at a donor pickup and determine if it will fit.

http://67-72chevytrucks.com/vboard/s...d.php?t=721374

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Yes, I've been following your build too. It is looking great. :metal: Some of the 67-72 medium duty had factory a/c but it is super rare.

Keep up the good work guys!

-Richard

Re: Rottenwood Garages C50 Hauler project about to begin!
 

About 900 miles round trip. Mountain roads and flat. It did great. 12 MPG. and all went well. AC was a little temperamental and the new wiper motor gave me some trouble in the 4 hours of pouring rain but aside from that.....what a pleasure to drive. Made 2 tows during the journey and they were a breeze. Rolled into Louisville doing 75 and the wind at our back.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Sounds like a good trip and 12 mpg is pretty decent for a rig that size. How is it for power?

Re: Rottenwood Garages C50 Hauler project about to begin!
 

All I need and more. 513 rear makes sure that happens.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

School starts soon... look out .;)

Re: Rottenwood Garages C50 Hauler project about to begin!
 

This school bus thing will NEVER get old. :lol:

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Every time I hit those inferior brakes I look up for a school bus! Thank goodness others have better ones than I do!!

These pictures loading sideways is getting a little OLD!!!

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Love the truck and the other Toys .

Re: Rottenwood Garages C50 Hauler project about to begin!
 

That first pic may be sideways, but it sure is cool!

Re: Rottenwood Garages C50 Hauler project about to begin!
 

This might help.:metal:Nice Toys.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

69 with a 69

Re: Rottenwood Garages C50 Hauler project about to begin!
 

One way to wire emergency lights on the rear!!! Here we go with the sideways pics again!?!?!

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Here we go.

Re: Rottenwood Garages C50 Hauler project about to begin!
 

Man AWESOME C50! I'm currently building a wedge bed truck and my Hodge Wedge bed has the 4 ratchet chain hold down things that are welded to the bed diamond deck. Can you post some pics of your FLUSH mounted ones ( mine are a tripping hazard) . I sure would like to cut holes in my deck floor and flush mount mine.