The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   77 Cheyenne swb air ride accuair (https://67-72chevytrucks.com/vboard/showthread.php?t=626594)

JakeDW 03-14-2015 11:42 AM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
Steering hooked up.

Jake

JakeDW 03-14-2015 11:45 AM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
Pic of the truck back together.We ran in to an issue with the oil pan hitting the ground before the cross so he is getting a Milodon pan for it. It's quite a bit shorter and should workout great.So in this pic the font is about 1 inch from sitting .

Jake

SCOTI 03-14-2015 04:03 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by JakeDW (Post 7089967)
Pic of the truck back together.We ran in to an issue with the oil pan hitting the ground before the cross so he is getting a Milodon pan for it. It's quite a bit shorter and should workout great.So in this pic the font is about 1 inch from sitting .

Jake
I worried about this on mine as well (notched x-member w/an OE BBC 6qt deep pan). I swapped over a Milodon 5qt pan. Once the motor was dropped in place, it was about 1" above the bottom of the x-member scrubline.

JakeDW 03-14-2015 04:14 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by SCOTI (Post 7090213)
I worried about this on mine as well (notched x-member w/an OE BBC 6qt deep pan). I swapped over a Milodon 5qt pan. Once the motor was dropped in place, it was about 1" above the bottom of the x-member scrubline.
His 502 is a gen 6 block what gen is yours?His pan is like 10 in with the plug dip on the very bottom.The gen6 Milodon pan is 7.75 inches deep.

Jake

SCOTI 03-14-2015 05:30 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by jakedw (Post 7090223)
his 502 is a gen 6 block what gen is yours?his pan is like 10 in with the plug dip on the very bottom.the gen6 milodon pan is 7.75 inches deep.

Jake
89 gen IV 7.4l

bbbc10 03-15-2015 05:43 AM
Re: 77 Cheyenne swb air ride accuair
 
looks good! do u have part numbers for the u joints u used?

Hankster 03-15-2015 05:22 PM
Re: 77 Cheyenne swb air ride accuair
 
Looks good! Btw I'm dead in the middle of y'all two, with my gen v 454.

bbbc10 04-08-2015 07:22 PM
Re: 77 Cheyenne swb air ride accuair
 
what size tire does he have on the back and what bed cover is that....also part numbers for the u joints etc? thanks

JakeDW 06-29-2015 11:15 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by bbbc10 (Post 7125130)
what size tire does he have on the back and what bed cover is that....also part numbers for the u joints etc? thanks
Not sure on any of this I will have to ask him.Sorry

Jake

JakeDW 06-29-2015 11:18 PM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
It's alive and running and he's putting miles on it so far so good said it drives nice sits on the side tanks and bolts for the trans cross.The Milodon pan worked out great he also put on patriot chevell headers 3 in to spin tech mufflers.Next is to finish the bed.


Jake

SCOTI 06-30-2015 12:05 AM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by JakeDW (Post 7225698)
It's alive and running and he's putting miles on it so far so good said it drives nice sits on the side tanks and bolts for the trans cross.The Milodon pan worked out great he also put on patriot chevell headers 3 in to spin tech mufflers.Next is to finish the bed.


Jake
Looks good!

tinydb84 06-30-2015 12:30 AM
Re: 77 Cheyenne swb air ride accuair
 
This is inspiration for me and my long bed. Looks great!

Low Elco 06-30-2015 12:30 PM
Re: 77 Cheyenne swb air ride accuair
 
Lookin' good! Hope to see it in September!

JakeDW 07-03-2015 11:42 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by Low Elco (Post 7226341)
Lookin' good! Hope to see it in September!
Thanks yeah we will be there.

Jake

cochino12 09-04-2015 02:49 PM
Re: 77 Cheyenne swb air ride accuair
 
any updates?

JakeDW 09-04-2015 06:34 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by cochino12 (Post 7298443)
any updates?
I raised the wheel tubs and put in the notch cover and its seam sealed.He is going to get it lined next week.

Jake

JakeDW 09-04-2015 06:35 PM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
Tubs raised and tacked in.

Jake

JakeDW 09-04-2015 06:36 PM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
Everything spotted in.

Jake

Low Elco 09-08-2015 12:29 PM
Re: 77 Cheyenne swb air ride accuair
 
It looked good at the Last Cruise!

lolife99 09-08-2015 02:25 PM
Re: 77 Cheyenne swb air ride accuair
 
Very clean and simple!

JakeDW 09-09-2015 04:52 PM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
It's lined

Jake

JakeDW 09-09-2015 05:03 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by SCOTI (Post 7225743)
Looks good!
Thanks man.

Jake

SCOTI 09-09-2015 06:16 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by JakeDW (Post 7303614)
It's lined

Jake
What type liner did he opt for? Been researching which one to go with for my duallys floor/bed.

JakeDW 09-16-2015 03:39 PM
Re: 77 Cheyenne swb air ride accuair
 
1 Attachment(s)
A pic Autofaze took at the ATN.

Jake

JakeDW 09-16-2015 03:41 PM
Re: 77 Cheyenne swb air ride accuair
 
Quote:
Originally Posted by SCOTI (Post 7303702)
What type liner did he opt for? Been researching which one to go with for my duallys floor/bed.
He had it done at a local place that is not a chain so not sure what product they use said they shoot it 6 times lol not sure on that.

Jake


All times are GMT -4. The time now is 10:48 AM.
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com