Re: Parting Out 86 Scottsdale 4x4
 

Are you selling the T-case shifter and the box to go with it?? And How much if you are.

Re: Parting Out 86 Scottsdale 4x4
 

Yes, $35 shipped for the shifter and the box. Thanks, Ray

Re: Parting Out 86 Scottsdale 4x4
 

How much for the chrome trim that goes around the grill/headlights shipped to 76086

Re: Parting Out 86 Scottsdale 4x4
 

The trim went with the front clip which was sold local. Thanks, Ray

Re: Parting Out 86 Scottsdale 4x4
 

Whats all the info on the rear end?

Re: Parting Out 86 Scottsdale 4x4
 

I sold the rear end local. This truck is pretty much done. There is only a few odds and ends left. It has a nice bare cab for $100. I have a 4x4 rear end out of a 86 swb 6 lug and a 4x4 rear end out of a 84 lwb 8 lug but I don't want to ship these big parts. Thanks, Ray

Re: Parting Out 86 Scottsdale 4x4
 

Would you have rear upper shock mounts. I believe all 73-87's are the same but mine are about 5 inches long and bolt through the frame. I could take a picture if it would help. I need both of them. Mine decided they would rather break than unbolt:smoke:

Re: Parting Out 86 Scottsdale 4x4
 

Yes, I have the shock mounts on a 86 4x4. $16 shipped for the pair. Thanks, Ray

Re: Parting Out 86 Scottsdale 4x4
 

I sent you a PM.

Re: Parting Out 86 Scottsdale 4x4
 

Have any 56" rear springs? Shipped to 97423.

Re: Parting Out 86 Scottsdale 4x4
 

The springs I have measure 51 inches.

Re: Parting Out 86 Scottsdale 4x4
 

how much for a windshield

Re: Parting Out 86 Scottsdale 4x4
 

Hi Ray,

I'm rebuilding an 86' Scottsdale Stepside that came originally with a bench seat. I would like to put in a split type bench seat that has the center console/seat. Have anything that would "bolt-in"? I don't really want to mess around with having to modify brackets etc but I guess if it comes to it, I might have too. Thanks for your help! Russ

Re: Parting Out 86 Scottsdale 4x4
 

Sorry, I don't have any split bench stuff. Thanks, Ray

Re: Parting Out 86 Scottsdale 4x4
 

I need a shifter knob for my 83 C20 granny 4 speed SM465. Do you have a knob like this? If so, what condition is it in? Thanks

Re: Parting Out 86 Scottsdale 4x4
 

You wouldn't happen to have a heater box assembly for a non A/C cab for 73-80 by chance?

Re: Parting Out 86 Scottsdale 4x4
 

How much for an 80's chevy 4x4 steering box shipped to 98848
Posted via Mobile Device

Re: Parting Out 86 Scottsdale 4x4
 

tucsonjwt- Sorry, I don't think I have any right now.

liftlawssuck- I have one from a 76. $50 shipped to MA

bikes&bowties- I have one from an 84. (I will be parting this truck this week)
$62 shipped in a large flat rate box.

Thanks,
Ray

Re: Parting Out 86 Scottsdale 4x4
 

That's exactly what I need if it doesnt have any play in it. Pm me with payment instructions. Thanks!
Posted via Mobile Device

Re: Parting Out 86 Scottsdale 4x4
 

Thanks for the quick response.
Actually I'm looking for the inside duct assembly. Not the defrost duct but the lower part. I'm looking for a really clean in good shape with all the tabs still on it.
Thanks

Re: Parting Out 86 Scottsdale 4x4
 

I am looking for a 83 dash pad and door panels (manual windows) in black?
let me know. Were is Orangevale, Ca?


Thanks,
CORSAIR

Re: Parting Out 86 Scottsdale 4x4
 

liftlawssuck- The inside heater box is $56 shipped. It looked good, but I will pull to verify.

CORSAIR- No dash pad, but I have 84 black door panels on a truck that I'm parting beginning today. $25 plus shipping for the pair. Alittle bit of chapping at the top.

Thanks,
Ray

Re: Parting Out 86 Scottsdale 4x4
 

I will take the black panels if they are manual? send me PM with your Paypal
info and I will get it handled


Thanks,
Fred

Re: Parting Out 86 Scottsdale 4x4
 

Looking for the chevy chrome cab corner pieces where chrome go's across back of cab?

Re: Parting Out 86 Scottsdale 4x4
 

I have a few of them stowed away. I will check this weekend.
Thanks,
Ray