Re: 71 blazer getting parted
How about the high tunnel for the 4 speed, still available? Zip 97383
|
Re: 71 blazer getting parted
Hey Randy,
PM sent on the parts you have for me. Thanks, Monte |
Re: 71 blazer getting parted
Dirt1972, yes your first in line on it, I'll try to get pics Thurs but it may be Fri. I have a meeting tomorrow night
Thanks Randy |
Re: 71 blazer getting parted
1970BLZCST, its not in the best of shape, I can get pics for you. $10 plus shipping. Thanks Randy
|
Re: 71 blazer getting parted
Hey Monte, no problem, we can wait and see on the other stuff. Thanks Randy
|
Re: 71 blazer getting parted
Randy,
Thank you, sounds good. Monte |
Re: 71 blazer getting parted
Randy,
Thinking about converting my 72 to a 4 spd. Let me know what you'd need for the tranny w/adapter and t-case, pedal assembly, clutch linkage and brackets, and transmission hump(if 1970 doesn't want it). Also the steering column if it's fixable. If you can palletize it, I can arrange for a truckline to pick it up. Thanks. Kurtis |
Re: 71 blazer getting parted
chalet, Kurtis, I'd rather sell it complete. I'm going to give it a few days on here and and local craigslist before I part out the undercarraige. If I decide to part it out, I'll pm you. Thanks Randy
|
Re: 71 blazer getting parted
1970BLZCST, the high hump is junk, its rusted on both side and cut around transfer shifter, sorry. Thanks Randy
|
Re: 71 blazer getting parted
2 Attachment(s)
pics for more parts taken off
emblems have some light pitting but not bad rear patch has some bondo, I think its good from rear of side marker back, basically last 6 or 7 inches |
Re: 71 blazer getting parted
2 Attachment(s)
shifter
steering shaft ac control |
Re: 71 blazer getting parted
2 Attachment(s)
clutch/brake pedal setup
booster setup |
Re: 71 blazer getting parted
2 Attachment(s)
clutch linkage
transfer shifter |
Re: 71 blazer getting parted
2 Attachment(s)
rear wiring harness
speedo cable and tranny gear |
Re: 71 blazer getting parted
2 Attachment(s)
tranny adapter gear
ac boxes |
Re: 71 blazer getting parted
2 Attachment(s)
under floor bucket seat bracket
windshiled cowl area |
Re: 71 blazer getting parted
2 Attachment(s)
pics for Monte, the chrome is faded on shims
|
Re: 71 blazer getting parted
2 Attachment(s)
wheels are sold, chassis is all there except front driveshaft and locking hubs
|
Re: 71 blazer getting parted
1 Attachment(s)
transfer and tranny
|
Re: 71 blazer getting parted
Guys I've had some pm's about the body and tub, it is junk, rusted no good, as you can see I cut the driver quarter off and also the windshield frame, and bucket seat brace, these were the only good body parts. Thanks Randy
|
Re: 71 blazer getting parted
How much for the hitch? Any pictures of how it mounts to the frame?
|
Re: 71 blazer getting parted
$30 plus shipping on it, I can get pics of sitting on frame the way it was mounted this afternoon. Thanks Randy
|
Re: 71 blazer getting parted
2 Attachment(s)
Wes, it mounts on frame with rear part (bottom side, it was hard to hold up underneath) and front brackets mounts to bumper brackets and the upright mounts to tag bracket
|
Re: 71 blazer getting parted
pm and funds sent on wheels Randy...thanks again bud
|
Re: 71 blazer getting parted
How much for the rear quarter section that you cut out? Im sure shipping would be a killer but who knows.. And I really only need from the rear of the marker light back that may save me a few $$
|
All times are GMT -4. The time now is 10:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com