The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 6 of 60

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)

- - "Project Orangepeel" 52 A.D (https://67-72chevytrucks.com/vboard/showthread.php?t=645774)

reaper71

11-04-2014 10:18 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

This pic shows the plate I made for the latch after I cut out the door (sorry did not have pic of cutting section out) because of how the latch is this section of the door moves out 1/2" so I had to build it out..

reaper71

11-04-2014 10:22 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

This view shows how it needed to come out.
the reason it comes out is the arm for the hinge where it needs to line up with hole in the door dictates this

reaper71

11-04-2014 10:25 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Quick shot of the Carriage bolt this will be my button (put in drill and sanded then polished)

reaper71

11-04-2014 10:29 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

These are the components for the buttons..
large bushings,small bushings,flat washers,cone shaped springs and the carriage bolts. (never mind the pins i decided not to go with them)

FarmerSid

11-04-2014 10:43 AM

Re: "Project Orangepeel" 52 A.D

Cool! Watching how you are doing your latches.

RockinKees

11-04-2014 04:18 PM

Re: "Project Orangepeel" 52 A.D

X2 ^^

Very interesting for me how you make this work.

Advanced Design

11-04-2014 08:43 PM

Re: "Project Orangepeel" 52 A.D

On my to do list too. Nice work Reaper....now if I can just remember it all.

reaper71

11-05-2014 11:07 AM

Re: "Project Orangepeel" 52 A.D

Farmersid,kees and A.D. thanks so much for the support I'll keep posting if all you guys keep checking in..

Mark..

reaper71

11-05-2014 11:16 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

So how it works is take the washer and drill it out to fit the small bushing then weld. you can see how the cone shaped spring fits over the bushing and will fit under the head of the carriage bolt.

reaper71

11-05-2014 11:17 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Small bushing welded to the washer..

reaper71

11-05-2014 11:20 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Now I weld the large bushing and washer together..

reaper71

11-05-2014 11:22 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Here you can get the idea of what I'm going for.

reaper71

11-05-2014 11:25 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

This is what it looks like together..
the bushing will then be inserted into the door and the carriage bolt AKA the button will be exposed...

RockinKees

11-05-2014 12:10 PM

Re: "Project Orangepeel" 52 A.D

Nice so far!

And I am sure we'll keep checking in ;-)

reaper71

11-05-2014 04:14 PM

Re: "Project Orangepeel" 52 A.D

Right on brother!!

Advanced Design

11-05-2014 06:22 PM

Re: "Project Orangepeel" 52 A.D

Quote:

Originally Posted by reaper71 (Post 6904621)

Farmersid,kees and A.D. thanks so much for the support I'll keep posting if all you guys keep checking in..

Mark..

That's a deal! Now I gotta print these pages and tape them to my doors.

Great next steps.....thanks for sharing.

FarmerSid

11-05-2014 06:37 PM

Re: "Project Orangepeel" 52 A.D

Quote:

Originally Posted by reaper71 (Post 6904621)

Farmersid,kees and A.D. thanks so much for the support I'll keep posting if all you guys keep checking in..

Mark..

Keep posting updates man. Always check'in in.

reaper71

11-06-2014 10:46 AM

Re: "Project Orangepeel" 52 A.D

Thanks again guys!!!

reaper71

11-06-2014 10:48 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Just a quick pic of how it looks going together..

reaper71

11-06-2014 10:56 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

In this pic it shows a couple things 1. the nut on the backside of the large bushing is for setting the depth of the button. 2. the flange or plate I welded to the bushing is for mounting it to the inside of the door. the reason I made this is I didn't want to weld anything to the outside of the door..so a hole is drilled for the bushing to go through the plate sets the desired depth for bushing sticking through the hole then the plate is welded to the inner skin of the door (A.D. doors have this for strength around handle)

reaper71

11-06-2014 11:00 AM

Re: "Project Orangepeel" 52 A.D

2 Attachment(s)

As you can see in the 1st pic the hole for the bushing and the shape of the plate. In the 2nd pic it shows how it goes in the backside also it reveals the inner skin I was talking about...

reaper71

11-06-2014 11:04 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

This is what the bushing looks like coming through the door. I wanted this sticking out to make a trim ring (this will not be painted body color) once the plate is welded to the inner skin there is NO body work to be done!!!!
Till next time..

Mark...

RockinKees

11-06-2014 05:27 PM

Re: "Project Orangepeel" 52 A.D

Nice!!

Maybe I missed it, but how is the door locked?
Electrical with a remote?

reaper71

11-07-2014 10:01 AM

Re: "Project Orangepeel" 52 A.D

To answer this question there is no lock at this point.. we dont have to worry about people getting in out cars around here lol..

Quote:

Originally Posted by RockinKees (Post 6906283)

Nice!!

Maybe I missed it, but how is the door locked?
Electrical with a remote?

reaper71

11-07-2014 10:04 AM

Re: "Project Orangepeel" 52 A.D

1 Attachment(s)

Here is a shot of what the button looks like installed on the truck as you can see no weld to clean up and after i blend in the paint around the bushing i will make a nice trim ring..

All times are GMT -4. The time now is 02:53 AM.

Page 6 of 60

Last »

Show 40 post(s) from this thread on one page