The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   57 Short Box 235 5sp C4 (https://67-72chevytrucks.com/vboard/showthread.php?t=739132)

Kevin_C 07-25-2019 01:46 PM

Re: 57 Short Box 235 5sp C4
 
trucks looking great!

Jason 56 08-03-2019 01:10 AM

Re: 57 Short Box 235 5sp C4
 
Build looks great! Really like the suspension! I’m not looking forward to the bodywork/sanding either :lol:

bobinbc 11-29-2019 04:43 AM

Re: 57 Short Box 235 5sp C4
 
Did you decide on spring rates for your front coilovers? I've seen that guys have been using 400# springs with the sbc TF trucks. Been researching it for mine, calculator seems to come up 400-450 depending on where I estimate the front unsprung weight will be.

https://www.ridetech.com/info/tech/s...te-calculator/

svr 11-29-2019 11:47 AM

Re: 57 Short Box 235 5sp C4
 
Quote:

Originally Posted by bobinbc (Post 8634562)
Did you decide on spring rates for your front coilovers? I've seen that guys have been using 400# springs with the sbc TF trucks. Been researching it for mine, calculator seems to come up 400-450 depending on where I estimate the front unsprung weight will be.

https://www.ridetech.com/info/tech/s...te-calculator/

I have what are advertised as 450# springs, haven't driven it yet but they seem a bit soft for my heavy 235, time will tell. Was about to send it to paint and decided to give everything another look, it's still here getting abunch of small stuff fixed and redone.

svr 01-10-2021 08:39 PM

Re: 57 Short Box 235 5sp C4
 
1 Attachment(s)
Ok its been awhile since an update, been a busy yr plus all the Covid crap.
Lots of sand, prime, block when time allowed. Finally declared it good enough for driver quality, i suck at body work so it was never going to be show quality but i wanted what ever it turned out to be to be mine.
I built a temporary paint booth inside my shop covered in plastic with box fan and furnace filter ventilation.

svr 01-10-2021 08:48 PM

Re: 57 Short Box 235 5sp C4
 
5 Attachment(s)
Base coat/clearcoat was the plan in pieces

svr 01-10-2021 08:59 PM

Re: 57 Short Box 235 5sp C4
 
1 Attachment(s)
The wood i used is called brown maple, i milled it on my table saw and fit it. I found that wood would not take stain even no matter what i tried, was about to make fire wood out of it or leave it natural color when i read about spraying it with clear coat. Ok what would happen if i mixed the stain with the clear coat? After a couple experiments to get the color clearcoat and hardener i went for it and after 3 coats am pretty happy.

Dan in Pasadena 01-10-2021 11:01 PM

Re: 57 Short Box 235 5sp C4
 
Interesting color combo. Is it light and dark gray? The lighter color seems to have a touch of green on my monitor. Loving your thread!

bobinbc 01-10-2021 11:03 PM

Re: 57 Short Box 235 5sp C4
 
Looks fantastic, nice work! Are you thinking about a contrasting pinstripe to separate the top and bottom (orange?) What is the cream color called?

svr 01-10-2021 11:50 PM

Re: 57 Short Box 235 5sp C4
 
Imperial ivory and Dawn gray,56 and 57 chevy colors, yes thinking about either orange or red maybe 1/4” pin stripe

oldman3 01-11-2021 01:06 AM

Re: 57 Short Box 235 5sp C4
 
Very nice...Jim

jjzepplin 01-11-2021 01:26 PM

Re: 57 Short Box 235 5sp C4
 
Wow! Driver? Mine must be wrecking yard! LOL

svr 01-11-2021 08:42 PM

Re: 57 Short Box 235 5sp C4
 
Quote:

Originally Posted by jjzepplin (Post 8862556)
Wow! Driver? Mine must be wrecking yard! LOL

Dont get to close, it defiantly a 30/30, 30ft or 30mph, LOL

57tailgater 01-12-2021 02:09 PM

Re: 57 Short Box 235 5sp C4
 
I really like the 2 tone paint. Where did you make the cut line on the bed? The fender bead?

svr 01-12-2021 06:53 PM

Re: 57 Short Box 235 5sp C4
 
Yes on the fender bead, about 3.5” below the body line.

57tailgater 01-12-2021 09:51 PM

Re: 57 Short Box 235 5sp C4
 
Can’t wait to see a full side shot of that. Thx.

svr 01-16-2021 07:57 PM

Re: 57 Short Box 235 5sp C4
 
5 Attachment(s)
Lots of bolts to put together bed wood, strips and inner and outer fenders, but they are all in.

57FleetsideC4 01-16-2021 09:56 PM

Re: 57 Short Box 235 5sp C4
 
Doing all the fun stuff now. Looking very nice. Steve

oldman3 01-17-2021 12:35 AM

Re: 57 Short Box 235 5sp C4
 
Looking sweet...Jim

svr 08-15-2021 06:55 PM

Re: 57 Short Box 235 5sp C4
 
5 Attachment(s)
Its outside and mobil, needs alignment before any very long runs, carb linkage needs some adjustment, choke stepup keeps kicking in. Sunvisors and inside roof panel sometime. Need more than a trip around the bock now.

jjzepplin 08-16-2021 08:38 AM

Re: 57 Short Box 235 5sp C4
 
WOW! Just wow! My favorite truck ever.

oldman3 08-16-2021 09:53 AM

Re: 57 Short Box 235 5sp C4
 
Very nice, enjoy...Jim

LT7A 08-16-2021 02:02 PM

Re: 57 Short Box 235 5sp C4
 
Wow, that came together nicely. Great work! I'll be very interested to hear how it rides and drives with the 30-year suspension upgrade.

bosco 08-19-2021 05:05 PM

Re: 57 Short Box 235 5sp C4
 
Beautiful truck. Enjoy driving it.

Oldtruckwelder 08-26-2021 06:45 PM

Re: 57 Short Box 235 5sp C4
 
Well done..
Beautiful truck
JT from SC


All times are GMT -4. The time now is 11:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com