Re: 83/84 swb stepside long time build
2 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
Now I'm back to the frame issue. Come to find out the frame is jacked up in the front. Took it to a frame shop and they had a hard time with it. Pulled a sheet with measurements from these forums and going to try and correct it myself. After I got it all set up, only place I can find messed up is from the front suspension forward. So im going to try and get it straight, make pockets for the sway bar to sit in, then box the front horns to renforce it.
Attachment 1533474 Cut the frame where I put the cups in for the rack and pinion. Hopefully this is where I can get it all lined back up. Attachment 1533475 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Here is after the frame shop worked on it. Got it up on stands and got as close as I could to the measurements from before mentioned sheet. See that the frame shop tweaked the front the other way.
Attachment 1534430 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
So I verified all the measurements, found center of frame on all the sections I thought were good and locked the frame down then jacked the front up and pulled it a few times to the side. Now the frame is with in 1/8 of center line and all the heights are with in a 1/4 of each other. put a few tack welds and a temporary x brace in. Going to lower it down tonight and set frame on ground and check all the measurements again before welding it back up and boxing frame.
Attachment 1534435 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Got it down on the ground and all looks pretty good. At least I'm happy with it for moving forward. Real sad I couldn't get any frame shops here in town to help me out. Going to weld it tonight and hopefully box some of the frame rails to strengthen it. Then cut some pockets for the sway bar. Tacked the bumper bolts while I was tacking the frame. Going to try and shave the bumper.
Attachment 1534660 |
Re: 83/84 swb stepside long time build
2 Attachment(s)
well got the cups for the steering welded back in. Also got the cups in for raising the sway bar in as well. Frame stiffed up really well. Not going to worry about boxing it.
Attachment 1535540 Attachment 1535541 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
Got the motor and cab back on to start welding up the cab floor.
Attachment 1535543 Attachment 1535544 Attachment 1535545 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Got started on the drive shaft tunnel. Ran out of cutting wheels half way through. Wife was out so waiting on her to bring me some back. Got bored and started filling in holes. LOL. going to need some putty for sure!! I want to fill in that cab seam as well. Would just welding it then grinding it off be the best bet??
Attachment 1535548 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Almost got done with the drive shaft tunnel, but rain came in and had to stop. Got one weld left along the top. The little Hobart 125 does pretty good with sheet metal.I have gas, but going to wait till I do external stuff.
Attachment 1535549 |
Re: 83/84 swb stepside long time build
Killer build bud. Just read the whole thing. Can't wait to see more on it. I'm planning to do something similar with my 86 step.
|
Re: 83/84 swb stepside long time build
Quote:
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
Well, got the drive shaft tunnel finished. Got the tranny tunnel all tacked in. Hope to finish welding it tomorrow and move onto the fire wall. Want to get rid of the plate for the steering column in engine bay and put an 1/8 in plate on inside. Any know of a nice looking polished or billet steering column thing for the firewall?
Attachment 1536294 Attachment 1536295 |
Re: 83/84 swb stepside long time build
Quote:
|
Re: 83/84 swb stepside long time build
Quote:
|
Re: 83/84 swb stepside long time build
Good progress! I would switch to gas. So much cleaner, even when you arent going to see it.
|
Re: 83/84 swb stepside long time build
Quote:
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
almost finished welding tranny tunnel. Need to weld from underside. So moving onto the firewall. Breaking out some parts to see where all is going to check what kind of mods are needed.
Attachment 1536606 Attachment 1536605 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
got the steering bracket off the wall. Going to put plate on inner wall to add strength back. Also going to make a plate to mount the gas pedal. So tomorrow going to get out wire harness and see how Im going to mount the circuit panel that was in the firewall as well as the hydro-boost to see how it is going to mount to the firewall. Still looking for suggestions for the ring for the end of the steering column.
Attachment 1536620 Attachment 1536621 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Going to roll the pinch welds down on the firewall and shave off the bolts for the parking brake to allow for the filler panel to lay flat.
Attachment 1536626 |
Re: 83/84 swb stepside long time build
Hey Rip, this is a cool build! I'm more of a 4x4 and static drop guy, but this one has my attention. You have a good thing going and I respect a guy that can go through the "stuff" with the shop that "stored" your truck and keep going. I know of very talented guys with good resources that have quit on projects because they got so disheartened. I am learning how to let go of unfairness so that I can proceed to a place where I can enjoy myself. You are heading that direction, so keep it up! We're (I am, at least) benefiting in ways that go beyond truck building. Thanks dude.
|
Re: 83/84 swb stepside long time build
Quote:
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
got the plates welded inside the firewall for the steering column and the AC. Welded some studs to the vintage air plate and drilled out the mounting plate to allow me to install the AC unit later. Got everything fairly flate on the firewall to get ready for the Slosh filler panels.
Attachment 1538817 Attachment 1538818 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
Ground some stuff and cleaned a little to prep the firewall for some Chasis saver paint. Painted the firewall and the backside of filler panels for an extra layer of protection. Still need to fill those couple of holes right behind engine. Ill do those when welding in filler panels.
Attachment 1538821Attachment 1538822 Attachment 1538823 |
Re: 83/84 swb stepside long time build
Think I like this Chassis Saver paint. Going to finish welding up my tranny and drive shaft tunnel from the underside. Clean the underside of cab and prep the inner cab floor and spray both with this Chassis Saver paint.
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
tested the panels. Just need to drill holes for the steering, brakes and and the AC hose bulkhead.
Attachment 1538825 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
couple small goodies came today. Both look like pretty good quality stuff. Going to the the Lokar shifting sensor and indicator later when I figure out where in the dash i'm mounting the indicator. (vert or hort)
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
4 Attachment(s)
Finally got all the welding done on cab floor and firewall. Really hate welding sheet metal. No patience for it. Ugly work, but its all getting covered up. Also got my buckets in and brackets welding in for mounting. Welding some angle to the tunnels for later to mount boards for the electronics in the console.
Attachment 1544464Attachment 1544465 Attachment 1544466Attachment 1544467 |
Re: 83/84 swb stepside long time build
I should put some new floor pans in, But i feel Id really mess it up with my current welding skills. So for now going to clean it up real good and coat the floor with chassis saver. It will give me a reason to tear it apart in 5-10 years. LOL
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
So got the under side all cleaned up. Cheap oven cleaner and a pressure washer works awesome on the grease and grime under there. I know. ugly welding. But you will never see it unless I run you over.
Attachment 1544468 |
Re: 83/84 swb stepside long time build
2 Attachment(s)
Didnt read the directions on Chassis Save on dry time and second coat, just assumed an hour for second coat. Nope!! 3-6 hours. Will be tomorrow before 2nd coat.
Attachment 1544470Attachment 1544471 |
Re: 83/84 swb stepside long time build
Going to scuff this tomorrow and apply a 2nd coat. Let cure 2 days and scuff and cover with a Wurth product that is for undercarriages. Supposed to seal, slight sound deadening and be chip resist. Then cover that with a coat of satin black.
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
I managed to get back out in the garage the other night and apply a 2nd coat. Let it cure for a day then scuffed it and sprayed it with Attachment 1544943 Attachment 1544944
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
Underside done. Turned out pretty descent.
Attachment 1546012 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Started on cab floor. Going to sandblast the door jams. A little rust in there then primer. Ordering some lizard skin to spray everything below windows and the ceiling.
Attachment 1546014 |
Re: 83/84 swb stepside long time build
Looking good man. I love those firewall panels! I saw that burb on Instagram. Very cool!
|
Re: 83/84 swb stepside long time build
Quote:
That burb is a pretty cool ride. |
Re: 83/84 swb stepside long time build
3 Attachment(s)
I think I got all the frame stuff done. Got the sway bar, rack and pinion and motor back in and all bolted up. Everything seems to look pretty good. Hopefully no more big hiccups.
Attachment 1549626Attachment 1549627 Attachment 1549628 |
All times are GMT -4. The time now is 01:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com