![]() |
Re: 1964-1966 center a/c vent
I have one of jims face plates that im not going to use as I bought a complete unit from severedchris 125.00 never used free shipping
|
Re: 1964-1966 center a/c vent
talked to my buddy John a couple days ago. we are going to work together on this project. this will help keep up with demand. im moving my operation so after that happens i will be back on track.
|
Re: 1964-1966 center a/c vent
Anybody have a picture of the Vent Box? Im kinda curious what it looks like.
|
Re: 1964-1966 center a/c vent
Quote:
|
Re: 1964-1966 center a/c vent
Quote:
|
Re: 1964-1966 center a/c vent
Quote:
http://img.photobucket.com/albums/v6...psd33147b7.jpg http://img.photobucket.com/albums/v6...ps9ef4e0f5.jpg |
Re: 1964-1966 center a/c vent
very nice jim did you get your vents done yet,the face plate is beautiful.
|
Re: 1964-1966 center a/c vent
sorry jim i bought your face plate already need just the 3 chrome vents if you have
|
Re: 1964-1966 center a/c vent
i will get there again but things are moving slow right now. money is an issue. i just need more time. please bare with me
|
Re: 1964-1966 center a/c vent
Subscribing in on this thread. Been waiting for someone to offer a 'kit' that resembles the OE set-up. I really like that you went the extra step to create outer vents/balls to match the center vent/ball style. That's definitely cool in my book.
I need to look up Vintage Air kit info & see what their hose kits look like (to the outer & center vents). I'd like to see/understand what it will take to allow connecting everything. Again.... Well done! |
Re: 1964-1966 center a/c vent
I'm ready for a set of 2 1/4 side vents complete. What's your lead time and cost?
|
Re: 1964-1966 center a/c vent
Quote:
|
Re: 1964-1966 center a/c vent
made some progress on the work room Sunday. now i need to run an air line to the room and i can start making parts again.
i was doing this at my friends that has helped me through this whole process. his mom got sick and he went back east to take care of her. so now im moving the operation to my house. im expecting to be in full motion by Christmas. getting started in a new location is costing me alot so please bare with me. |
Re: 1964-1966 center a/c vent
:metal:
Quote:
|
Re: 1964-1966 center a/c vent
I would like to purchase the small vents and have my AC balls chromed. Can you help me with this or get me in touch with your chrome service? Thanks! You work is impressive. I would like to see a part that mates the AC to factory vents. I hope vintage air works with you in the near future!
|
Re: 1964-1966 center a/c vent
this Sunday John and I plan on installing the airline to my workroom. just one step closer to getting those parts to you guys. I will keep you informed with the progress.
|
Re: 1964-1966 center a/c vent
we finished most of the new air line system. should be done this Sunday if all goes as planned. then i can start making parts again. it takes alot more money than i thought to buy all that copper line. spent like $421 just on copper pipe.
|
Re: 1964-1966 center a/c vent
okay i know its been a long time waiting but im finally ready to start making parts. i will contact you when your part is ready for those on the waiting list. and if you want to be on the list just send a PM.
$300 each...complete center vent assembly $150 each...faceplate $130 set of 2 side vent ball assembly $50 each...chrome vent balls any size or center vent $25 each...raw vent balls any size or center vent $10 each...center vent ball mount $12.50 each...good used old vent ball trade in. |
Re: 1964-1966 center a/c vent
|
Re: 1964-1966 center a/c vent
Pm sent
|
Re: 1964-1966 center a/c vent
I'm going to make a package deal for those of you that want the complete center assembly ($300)and the complete side vent assembly ($130). so instead of 430 dollars I will make it 400 dollars . free shipping
|
Re: 1964-1966 center a/c vent
what does the side vent assembly look like?
|
Re: 1964-1966 center a/c vent
Check post 123
|
Re: 1964-1966 center a/c vent
i need to make a few more before i ship them off for chroming. as you can see they are a little smaller than the center plate vent ball.
http://img.photobucket.com/albums/v6...ps518fd7b7.jpg http://img.photobucket.com/albums/v6...ps8e2d859b.jpg |
Re: 1964-1966 center a/c vent
still making the vent balls and center vents to fufill the waiting list. thats a minimum of 67 vents i need to make. once those are done they go off to get chromed and thats a 5 week turn around. i will keep you posted as always.
|
Re: 1964-1966 center a/c vent
my hot water heater went out and my truck rear end went out the same day. so with that said i have some 2nd`s i need to sell to help me out. i have some vent balls regular and some small plus some center vents at $10 each. they will be raw so you can paint them silver or any color for that matter. plus i have 1 face plate 2nd for $50. PM me if interested and Happy new year to all.
http://img.photobucket.com/albums/v6...ps5208d502.jpg |
Re: 1964-1966 center a/c vent
4 Attachment(s)
Jim,
Thanks for that panel doesn't fit the gmc dash boards like I was kinda hoping but that's ok it wont go to waste lol I found another spot to put it in that will work beautifully! take an eyeball and the preliminarys Sean Wolff now and interesting question for you Jim after I get the mods done for this setup could I send you a template back for a possible recast or however you do this magic with a few more mods I am going to make for mine? these vents in the picture say they are a 2.706 diameter I am trying to find out from vintage air what the hole size is for them. I have this style in my daily driver and love them! |
Re: 1964-1966 center a/c vent
okay I got my hot water heater in my house replaced got the rear end in my truck replaced and got the transmission in my truck rebuilt.it's time to get back on my feet again so I can focus more time now on the project. You have waited for so long I apologize it just seems like life keeps getting in the way.I'm going to be sending out some vents to get chromed this week remember its a five week turnaround. once those come back I'll have some parts for you guys.again my apologies for waiting so long and thank you for your patience.
|
Re: 1964-1966 center a/c vent
I'm glad to hear that you were able to make some progress and get some things accomplished. That's always a good feeling.
|
Re: 1964-1966 center a/c vent
Hell yeah :metal: those items breaking are enough to overfill someones stress limit. looks like you took care of business and got it done. Good Job.
|
Re: 1964-1966 center a/c vent
okay sent off enough vents to be chromed to make 3 complete assemblies plus some extra vents. i will let you know when i get them back and then i can ship soon after.
|
Re: 1964-1966 center a/c vent
i need your opinions. on the custom 2.5 in vents im making would you want the bezel to be chrome like this one or black so you can paint it dash color.?
the original face plate is Fawn with the vents only in chrome so to follow suit im painting my black bezel Fawn to stick with the original theme. but i still want some outside thoughts. try and picture the vent chrome this reddish pink one is my prototype and i dont have any in chrome for pics yet. http://img.photobucket.com/albums/v6...ps9e3be7ae.jpg |
Re: 1964-1966 center a/c vent
1 Attachment(s)
I would like chrome, my project is more custom than resto. I'm gonna need 4 when I get that far. 2 in the center and 1 at each end.
|
Re: 1964-1966 center a/c vent
okay i think most people will want chrome. so that will be the default unless im told otherwise.
on another note the chrome guy emailed me and said he has started on the vents i sent him.:chevy: |
Re: 1964-1966 center a/c vent
Do you get a discount with the chrome guy since you send him so much work?
|
Re: 1964-1966 center a/c vent
I would like mine paintable to match the center vent
|
Re: 1964-1966 center a/c vent
Quote:
|
Re: 1964-1966 center a/c vent
Quote:
|
Re: 1964-1966 center a/c vent
Yes. Pm sent on 11-19-14. Thanks
|
Re: 1964-1966 center a/c vent
Quote:
|
All times are GMT -4. The time now is 08:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com