Re: The 60-66 "PAYING IT FORWARD" thread!
 

Interested in the bed braces but it would require shipping.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I've go two parking lamp buckets for a 62-66. Good shape. lenses are melted out. $10 for shipping and they're yours! It's an extra set I don't need.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Wayno - Have you had any chance to look into the motor mounts/stands and the hood hinges?

Thanks!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I have an in-cab gas tank out of a 64 complete with sender. I am not sure if the sender is any good, but the tank looks pretty clean.

Local pick up

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Im interested in the filler neck. Would you separate them?

I can separate the filler neck and cap. Do you need the plastic part that comes through the cab or the metal part bolted to the tank?
Posted via Mobile Device

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Probably would have gotten the point WITHOUT the caps but thanks for setting me straight.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.
http://i1106.photobucket.com/albums/...psac9dnb5b.jpghttp://i1106.photobucket.com/albums/...pssrhabngb.jpg

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Hood hings are gone and I don't know whether those are 6 or 8 cyclinder motor mounts - you are welcome to them - pm me with an address and I'll try to ship them saturday morning.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

1 1/2 inch REAR Lowering blocks off of 1966 C10 Suburban. Will fit C10 pickup with rear coil suspension also. FREE Call or text Jim 360-410-0103

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Lowering blocks are spoken for. J

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Would you ship it to 84043?

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I have both lower firewall/footwell and the area under the seat. They came from a wrecked 61 and are in very good shape. I am in central North Carolina near 95 if anyone wants to pick them up. Otherwise PM me.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

This is gone.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'm in New Orleans...WOO Mardi Gras!!
Off 65 short
I've got
- 3 6 lug wheels (keeping one for spare) have 235s n 31s
- 2 hood blinkers w/lenses I think and 1 chrome bit
- Really good condition grill (white pearlescent-small dent barely noticeable)
got it for free giving it for free.. Doesn't fit look of my truck at all ��
- 67- repair manual in ok condition


Small bits can be shipped for cost
Grill would rather not
All I can think of at the moment on Chevy truck parts

Let me know if there's Anything Free in/around my area!!

!!Fantastic Thread!!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

http://imagizer.imageshack.us/v2/640...910/HnIoy8.jpg
http://imagizer.imageshack.us/v2/640...908/k1BSsO.jpg
http://imagizer.imageshack.us/v2/640...909/izeWKz.jpg

Re: The 60-66 "PAYING IT FORWARD" thread!
 

If you decide to ship the grill, I'd take it.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

2nd in line for the grill if you decide to ship!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I built one of those Cab Lifts before, they are awesome tools.

Look here at how a small lady, with a baby on the hip, one handedly lifts off a cab.

https://m.youtube.com/watch?v=vfTC9wyQKK0


Less than sixty seconds......

https://m.youtube.com/watch?v=LxcuePYK-8Q


And the Dolly will be brilliant too.

I do hope someone sees it and needs it.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

hi mike wish I was closer to you so I could pick them up.
but im in nc.
if you do take them apart to scrap them .
I would pay the shipping to get the set of 4 casters .
thanks jim

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I see someone else is already trying to give away an in cab tank but I'll offer mine as well anyhow. Free for local pickup in Western Washington from a 65 C10. Looks solid, no rust. Not even any smells until I disconnected it. Straps and mounts (if I can get them out) included.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I got the mounts Wayno, Thanks!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Crazy, PM Sent

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Got the blocks Jim,thank you.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Budget build special: one used, intact, but less than professional re-do seat cover. This cover has the original fawn outer panels, and sorta ill-fit two-tone inner panels. Yanked in favor of an original for my latest project.
Probably an amateur sew job, but for the price of shipping you can stop sitting on foam or stuffing.
I'll guess it can be sent for under $20. First "I'll take it" here gets it.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

il take it . thank you
chevyjim1960@aol.com

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Great! Email sent.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Ill take seconds on that seat cover if it falls thru.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I sent $$ for shipping the other day .

Re: The 60-66 "PAYING IT FORWARD" thread!
 

10-4

Re: The 60-66 "Pay It Forward" thread!
 

Are these hubs still available? I just bought a c20 and need to change it all out to c10 suspension.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Hi Mike
Is the cab stand and lift still available.
Thanks

Re: The 60-66 "PAYING IT FORWARD" thread!
 

cool seat cover
got it Tuesday
thank you Jim

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Las Vegas, Nevada (cannot ship)

Free parts:

* Chrome grill with head light mounts and bezels

* windshield

* bed cross sill (1 only)

* Exhaust system to fit short bed fleetside (Flowmaster mufflers)

* tail light housings (1 pair)

* front turn signal housings (1 pair)

* clutch pedal

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I need these and I'm in vegas when can we meet up?!?! And what part of town?

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I could use the windshield if its 64-66 the tail lights and turn signals. Mabye grill bezels to ive got a bent drivers side im sure Ive got a buddy who lives there and is comming to see me out here tomorrow or Tuesday could you please call or txt me 4426009184 thanx if raptor 0206 dont get it.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'll take the grill

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Id need the bumper guards if available i can have my buddy swing by he lives in vegas and comes out here once or twice a month.i need pass door moldings both. Drivers cab corner bottom molding. Pass long bed thick top strip molding, chrome bumper gaurds, fan/air knob, deluxe up and down. Arm rests any condition color & visors too. 283 2 barrel cab air cleaner any condition if cheap or free. Heater box. Windshield, drivers vent window knob. Complete roof top inner outter skins thats a long shot lol not looking for hand outs or freebies unless its in your way or you dont want it will pay for some of this too.or Even if its extra beer money lol for your time

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Hey guys i picked up the parts from ZO66 today. Thanks again!
There might be a few things I won't be using that I can send out for you guys i just have to check once i get down to cali to look at the truck.