|
Re: project orange crush 76 crewcab build
5 Attachment(s)
So close to finished
|
Re: project orange crush 76 crewcab build
2 Attachment(s)
Door back on
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Haven't done much too the truck lately it's monsoon season so every time I wanna work on it it wants to rain. I got the driverside pretty much all finished up. Took the cowl panels too work and stripped them to bare metal and epoxy primed them. Cut out a filler panel for the driver side kick panel vent hole and I filled in the hole in the trans tunnel cover. Hopefully I'll get started on the pass side floor soon.
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Got started on the pass floor this week.
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
The inner rocker was in better shape than the driverside so I didn't need to replace the whole thing just a section of it.
|
Re: project orange crush 76 crewcab build
4 Attachment(s)
This pass side floor pan didn't fit well at all. Took allot of massaging to get it flat against the supports and close enough to weld.
|
Re: project orange crush 76 crewcab build
1 Attachment(s)
Finally the end is in sight! I'll get the outer rocker trimmed and fit tomorrow and welded on then I can weld the cowl panels back.on and start bodyworking the firewall finally can't wait to get all this metal work done so I can get some color on this and install my ls swap
|
Re: project orange crush 76 crewcab build
2 Attachment(s)
Here's a parts blazer that Ive had and finally got it cut up and have been playing around with some yard art idea's. Thinking this would look cool mounted against my wall or maybe even incorporate it into my gate not sure what the end goal is just yet but when the weather cools down I'll get back too it.
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Got the rocker and cowl welded up. Ground down all the welds and got some primer on everything. Rehung the door with the rebuilt hinges and got it all mocked up for now. Still need to finish the driverside cowl then I'll get that side in primer and start bodyworking the firewall and rockers
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Looks good in primer
|
Re: project orange crush 76 crewcab build
3 Attachment(s)
Mocked up the fender for the first time in over a year kinda nice to see it looking like a whole truck again. Also picked up a door for the yard art project.
|
Re: project orange crush 76 crewcab build
Nice job. Been watching what you do since I'm trying my hand at replacing my rockers and floors in my c30 shortly. Thanks for all the pictures.
|
Re: project orange crush 76 crewcab build
Quote:
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Got the driverside in epoxy and 2k primer then I hung the door and fender again to check fitment
|
Re: project orange crush 76 crewcab build
3 Attachment(s)
Just about totally gutted time to start the bodywork on the firewall, rockers and get everything in primer and ready for paint.
|
Re: project orange crush 76 crewcab build
2 Attachment(s)
So heres my newest project to flip. I was browsing facebook sales and this was posted for 1k so I messaged the seller and was on my way. I got there first with cash and it was ment to be so here's my new 75 Chevy c20
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Gave it a wash and put two of my torque thrusts on to move it gotta say this truck sure has alot of potential
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Theres no drivetrain but ive got a 350,th400 that im going to install in it. The interior needs work but its all there. I'll post updates on this one as I work on it
|
Re: project orange crush 76 crewcab build
That is a good find for a flip. A little work and you should make a nice profit.
|
Re: project orange crush 76 crewcab build
Very nice work on your crew cab, and nice score on the 75! That will make a nice truck with a little bit of work. Like daddyjeep said, it should yield a very nice profit!
|
Re: project orange crush 76 crewcab build
Quote:
|
Re: project orange crush 76 crewcab build
Quote:
|
Re: project orange crush 76 crewcab build
3 Attachment(s)
Got the passenger side all sanded and primed
|
Re: project orange crush 76 crewcab build
5 Attachment(s)
Bodyworked my driverside fender. It's ready for primer and block sanding rounds now. My pass side fender needs some rust repair and is in rough shape overall still unsure if I should put the time into this one of find a better replacement
|
Re: project orange crush 76 crewcab build
Looking nice! I'm not sure on the fender. If you can find a nicer one close to you then getting a different one would work. But my luck you can't find any near me so I'd spend the time and fix it. Haha
|
| All times are GMT -4. The time now is 10:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com