The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 8 of 10 « First 34567 8 910
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA 72 blazer 4-spd CST part out (https://67-72chevytrucks.com/vboard/showthread.php?t=784007)

1rippen6 03-19-2020 03:41 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by AJs72K5 (Post 8697629)
Any brake pedal return springs on hand? Need one for my 72 K5
Are you talking about the one for the e-brake?

AJs72K5 03-19-2020 03:53 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8698119)
Are you talking about the one for the e-brake?
No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.

1rippen6 03-19-2020 04:02 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by AJs72K5 (Post 8698124)
No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.
Ok, I'll look again tomorrow.

1rippen6 03-19-2020 07:11 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by KevJim72 (Post 8698065)
Correct! Thanks
http://67-72chevytrucks.com/vboard/s...d.php?t=800205

Here is the handle cover I have, it needs some TLC

KevJim72 03-19-2020 07:37 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8698236)
http://67-72chevytrucks.com/vboard/s...d.php?t=800205

Here is the handle cover I have, it needs some TLC
I'll pass on the cover at this time....how about screws for the latches/hold downs?

1rippen6 03-19-2020 09:46 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by KevJim72 (Post 8698251)
I'll pass on the cover at this time....how about screws for the latches/hold downs?
I'll get you some pictures tomorrow.

wwjd-5-2 03-20-2020 06:29 AM
Re: 72 blazer 4-spd CST part out
 
Long stretch but in for the Swinging tire carrier 300 +

1rippen6 03-20-2020 07:15 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by wwjd-5-2 (Post 8698473)
Long stretch but in for the Swinging tire carrier 300 +
Sorry, gone.

1rippen6 03-20-2020 07:17 PM
Re: 72 blazer 4-spd CST part out
 
1 Attachment(s)
Quote:
Originally Posted by KevJim72 (Post 8698251)
I'll pass on the cover at this time....how about screws for the latches/hold downs?
Here is what I have

1rippen6 03-20-2020 07:18 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by KevJim72 (Post 8698251)
I'll pass on the cover at this time....how about screws for the latches/hold downs?
Quote:
Originally Posted by AJs72K5 (Post 8698124)
No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.
I found what you talking about but the first one I was looking at was missing it also. Let me look in my hardware bins this weekend

AJs72K5 03-20-2020 08:54 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8698835)
I found what you talking about but the first one I was looking at was missing it also. Let me look in my hardware bins this weekend
Sounds good. Thanks!

1rippen6 03-21-2020 06:42 PM
Re: 72 blazer 4-spd CST part out
 
1 Attachment(s)
Quote:
Originally Posted by 6768chevylover (Post 8683971)
Dwayne- would you have the frame done by spring carlisle swap meet? -Mike
Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.

KevJim72 03-21-2020 11:55 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8698834)
Here is what I have
Dwayne, what are you asking for these?

1rippen6 03-22-2020 08:58 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by KevJim72 (Post 8699581)
Dwayne, what are you asking for these?
20 shipped

KevJim72 03-22-2020 10:20 AM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8699671)
20 shipped
pp sent. Thanks

allchevy1 03-23-2020 02:53 AM
Re: 72 blazer 4-spd CST part out
 
Interested in the roof rack if it's still available.

1rippen6 03-23-2020 06:21 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by allchevy1 (Post 8700325)
Interested in the roof rack if it's still available.
I will have to look and see if I still have it.

6768chevylover 03-23-2020 08:56 PM
Re: 72 blazer 4-spd CST part out
 
[Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.]

Dwayne- I still want to pick it up. Let me know when your ready and ill figure out a date. Pics of front bumper brackets would be good. Thanks Mike

1rippen6 03-24-2020 12:53 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by AJs72K5 (Post 8698895)
Sounds good. Thanks!
Sorry, no luck finding a spring.

1rippen6 03-24-2020 01:00 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 6768chevylover (Post 8700804)
[Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.]

Dwayne- I still want to pick it up. Let me know when your ready and ill figure out a date. Pics of front bumper brackets would be good. Thanks Mike
I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.

1rippen6 03-24-2020 01:02 PM
Re: 72 blazer 4-spd CST part out
 
2 Attachment(s)
Quote:
Originally Posted by allchevy1 (Post 8700325)
Interested in the roof rack if it's still available.
I have this one it does have a bent support if still interested I can get more pictures 80 plus shipping

6768chevylover 03-24-2020 01:11 PM
Re: 72 blazer 4-spd CST part out
 
[I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.]
Sounds good! Let me know...

AJs72K5 03-24-2020 02:38 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by 1rippen6 (Post 8701194)
Sorry, no luck finding a spring.
Thanks for checking!

Eagle9502 03-29-2020 10:04 PM
Re: 72 blazer 4-spd CST part out
 
Dwayne, how about shift linkage for a 4wd automatic?

1rippen6 03-29-2020 10:53 PM
Re: 72 blazer 4-spd CST part out
 
Quote:
Originally Posted by Eagle9502 (Post 8704685)
Dwayne, how about shift linkage for a 4wd automatic?
Yes, I have one, I'll get some pictures.


All times are GMT -4. The time now is 02:50 AM.
Page 8 of 10 « First 34567 8 910
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com