|
Re: 83/84 swb stepside long time build
Yes had a cam, lifters and springs.
Had a stall converter made and the tranny rebuilt and beefed up a little. After I get it in and running. Going to take it to the shop and have the guy tune it on the dyno. |
Re: 83/84 swb stepside long time build
Those don't look like LS mounts. Did you figure them out?
|
Re: 83/84 swb stepside long time build
Yes, got with Porterbuilt and they fixed it up. Sent me the LS mounts. I just have to send them back the other SBC mounts when I get back from Mexico.
Porterbuilt has great customer service and I recommend their products. Really satisfied with what I have purchased from them. |
Re: 83/84 swb stepside long time build
Well getting back on the truck when I get back from Mexico. Was thinking about sound deadening stuff. A guy here just did his 56 with a double layer of Fatmat on the floors and juet on firewall and a double layer of Fatmat on the ceiling. Says he is very happy with sound and may have think he over done it but is happy with results. I have read alot of stuff on here even the sound deadening website. But I think I want to do Lizard skin sound heat on underside cab and inner and bed fender wells. Then do one layer Fatmat on everything up to bottom of windows and the ceiling and see how it sounds. That gives me the option of later of closed cell foam and MLV if i think I need it.
Any thoughts on that combo to start? |
Re: 83/84 swb stepside long time build
1 Attachment(s)
Well back from 7 weeks in Mexico. Managed to lose 16 lbs while there, 4% body fat and a lot of muscle. Tried to keep diet in check and workout in my room. Just couldn't eat enough I think. Got back last night and had today off so I decided to get back to work on truck. Got the freshly rebuilt tranny out and cleaned it up.
Attachment 1466769 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
Engine and tranny all painted. Getting the converter back on Monday then will bolt them all together and put on frame with new mounts from Porterbuilt. Then I can get the cab out of storage and see how much I'm going to have and cut out of the floor.
Attachment 1466776 Attachment 1466777 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
Got the engine and tranny on the frame.Leveled the truck front to back off the cab mounts. Then put engine tranny at the recommended down 5 degrees. The front of the oil pan almost touches the rack and pinion. The rear of tranny is sitting pretty high up. Ended up mounting the tranny bar just under the top of the frame. Any know id that sounds about right?
Attachment 1467441 Attachment 1467442 Attachment 1467443 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
|
Re: 83/84 swb stepside long time build
Looking good! You have done a ton of work.
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
been fighting with can bolts since i pulled the cab. Finally gave up and cut holes in the floor. Yea more stuff to fix later. Made a mess of it too!
Attachment 1471074 Attachment 1471075 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
1 Attachment(s)
|
Re: 83/84 swb stepside long time build
2 Attachment(s)
got it back on frame with new cab mounts and it is a lot higher than before. Little frustrated with this. Thinking about doing a body drop now. Never did one those, Might be a little interesting. Its sitting about two inches from the pinch weld being on the ground.
Attachment 1471083 Attachment 1471084 |
Re: 83/84 swb stepside long time build
Down the rabbit hole!
|
Re: 83/84 swb stepside long time build
So it has been awhile. Decided it would be wise to take 3 classes this spring with a full time job. Not so smart. Did manage to do a little work over the X-mas break and here and there.
|
Re: 83/84 swb stepside long time build
5 Attachment(s)
So I moved on with the frame. Everyone keeps telling me that once I get all the weight on it will flatten out. So I dropped in motor, cab and test fitted some panels.Attachment 1533450
Attachment 1533451 Attachment 1533452 Attachment 1533453 Attachment 1533454 as you can see the passenger side is high. Still wasnt low enough. LOL |
Re: 83/84 swb stepside long time build
1 Attachment(s)
So a freind suggested what to do to the frame to get it lower. This is his ride.
Attachment 1533455 |
Re: 83/84 swb stepside long time build
4 Attachment(s)
So off to the metal place I went.
Attachment 1533456 Test piece Attachment 1533457 Attachment 1533458 fianl. just need to clean up some welding Attachment 1533459 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
I cut the bottom of the frame off and now it picks the cab off frame when its aired out. LOL. Probably end up rolling the pinch welds under and laying the rockers. Did run into the ball joints running out of travel. Held it up a little. So I made some angled shms at work and got rid of that problem.
Attachment 1533460 Attachment 1533461 Attachment 1533462 |
Re: 83/84 swb stepside long time build
3 Attachment(s)
That was around X-mas. The rest this spring has been slow. Classses ate up all my free time. Managed to get the seats im going to use mounted.
Attachment 1533463 Attachment 1533464 Attachment 1533465 |
Re: 83/84 swb stepside long time build
1 Attachment(s)
had to cut a tunnel for my driveshaft. Just got metal this weekend to cover the tranny and driveshaft.
Attachment 1533466 |
| All times are GMT -4. The time now is 01:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com