Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Great product! I've only got one issue. The throttle is a good inch above my brake pedal, but my brake pedal is not on the rest. My question is with power brakes does the brake pedal rest against the stop?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

How far off of the stop is it? I think it should rest again the stop regardless of power or not, at least all of mine have.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

It's got a good inch before it touches the stop. Do you think there is that much adjustment in the rod?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Looking back through this thread most of the pictures show the brake pedal higher. Here is one a little furthur back in this thread shows what mine looks like.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Here is what mine looks like. I took it loose & tried to adjust it back some. I made about 5 full turns and the end fell off in my hand. So it looks like there isn't enough adjustment there to make it come close to touching the stop. You can see where I cut the pedal & tried to make it work then welded it back.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I would try to figure out a way to lengthen the brake pedal rod as it should really be resting on the stop. Your local hardware store should have some all thread and couplers to help you accomplish this.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Hi Rob.

I bought your pedal bracket a while back and have gotten around to installing it today. It seems that the pattern for mounting to the firewall is off.
Assuming the orientation in the picture is correct (other than the picture is 90 degrees counterclockwise), my actual holes in the truck are 1.50 between the top holes and 2.00 to the bottom one.

Not sure whats up but, no big deal, I'll take it to work tomorrow and just slot the holes.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Tony - it looks like your firewall has the 73-87 pedal bolt pattern. Just use the bottom hole on the triangle and redrill the top two holes. Sorry for the inconvenience.

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

No problem. Strange that my 71 would have a different pattern, but oh well. It will still save me a bunch of time and fabrication!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

It is odd, but I've seen about 4 or 5 of them. Luckily it's an easy fix, :metal:.

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Do you have any brackets available? I need one.
Thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Yes I do! Paypal info in first post. Thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Payment on the way. Thank you.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thanks! Shipped today via USPS!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I'm fitting my DBW gas pedal in my AD. It's the same as in the pic. It is comfortable to have the gas pedal ahead of the brake pedal. Mines looking the same in order to get full travel.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

bump!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Sir, I would like to order a pedal bracket please.

Thanks
Chris

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

No problem! PayPal is robhartley@aol.com, $100 shipped. Thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Money sent...thanks

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thank you! It will ship via USPS tomorrow. Take care.

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Man, do you have ANY way to make a 97-04 Corvette pedal to work in a 66 C10?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Please post pictures of the pedal and the firewall.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Hey bud.. I FINALLY got around to xtrying to get the pedal in. I had cherry insulation. Kinda hurt to cut it! Lol
Anyways has anyone mentioned havng to notch the bracket for the taillight plug? No biggie just wanted to mention it. Thanks again rob.
Early production 67.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

No one has mentioned that Michael, I wonder if the 67 plug is in a different location then the 68-72?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

i made the cut larger than it had to be but after i did that it worked perfect. i wouldnt doubt the plug location being just a bit lower on a 67.