Re: The 60-66 "PAYING IT FORWARD" thread!
- i have an under the hood latch for a 63-65 and the 4 bolts (no latch pin)
- a 62 hood with no latch (can put them together). lots of bondo work and holes up front - 62 passenger side front fender with alot of bondo work - and still have a 60-62 bumper (no bolts) with a little bend in it |
Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
I'm am trying to sell this front end off of my 61 c10, but if someone here wants it and wants to come and get it I will give it to them. Its the torsion bar front end and is in good shape. I have the steering box for It as well. Located in 84526, Utah.Attachment 1541856
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
60 to 63 driver's door. In rough shape. Panel cut to prepare for new after market piece. Found another door in better shape. Free in Calgary, AB, Canada
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Please note, this is in England, but I am posting it on here as well, in case a lurker or member sees it or needs it.
This unit is dusty, but good. Slips into each other, and four screws to keep it all together. Wall mounted display unit. Collection only, in flat pack from Rochester, Kent. Bottle of Pepsi there for size perspective. Kettle is on. http://i294.photobucket.com/albums/m...sfcfkmsqx.jpeg http://i294.photobucket.com/albums/m...s0zy1pnmw.jpeg If it does not find a home, it will drive a BBQ. Advertised elsewhere as well. First PM and collection gets it. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Shelving gone to Jeff from Sittingbourne.
STC. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Door found a good home thankfully. Kijijied it and a local guy loved the price! He making a crew cab.
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
Here's a bit of chrome for ya'. It's off a 4.1L, comes with both the breather and PCV. The PCV works, but it's a tad bit on the loud side. Underside of the valve cover could use a little cleaning, otherwise it's in pretty good shape overall. It was replaced by an old school script cover. Pay for postage and it's all yours.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
I have a stock (20.5 gal I think) fuel tank if anybody needs one,pick up only.I'm in Whittier CA
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1965 C10 front suspension complete with cross member and manual steering box. I also have complete rear suspension except rear end. If there is any interest I can take a few pics. The parts are located in Batavia IL Zip 60510 for pick up only.
Thanks Greg |
Re: The 60-66 "PAYING IT FORWARD" thread!
Greg, is the front end stock (worn out) or rebuilt? Thanks
|
Re: The 60-66 "PAYING IT FORWARD" thread!
It's stock except for 3 inch lowering springs. It drove pretty good for a 65.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I have the in cab gas tank from my 66 on eastern shore of VA. Previous owner of truck pulled it because he said he didn't like listening to gas slosh around. That said, no idea of its working condition as it was empty and in the bed of the truck when I bought it.
Can't imagine it's worth shipping... But I'll be happy to try to meet someone within reason at a mutually agreeable time. My best friend lives outside of Greensboro, NC, so I'm occasionally traveling from here to there and could easily bring it along. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Month later but is susp still avail for local pick up
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
I removed the stock tank today. Looks to be in really good shape, if you need one give me a shout. I can ship if needed. North Ga. Area. Posted via Mobile Device
Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
Edited by Forum Staff
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Please read post #1. This is NOT a WTB thread.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
My apologies Jay
Bubba |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
^^^we're going to need pics of this transaction!^^^
Nice offer. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Yes, in '65 Chevy offered a red trimmed seat (on certain colored trucks) if you didn't know. If it's orig, I just might make the drive! |
Re: The 60-66 "PAYING IT FORWARD" thread!
4 Attachment(s)
Hi everyone! I have a few things I need to see if anyone wants. Let's start with four items. I have two complete torsion bar front ends one is from a '62 Chevy c30 dually, the only thing I've done to this is remove it from the truck. the second one is from a '62 GMC 1500 series, it was ordered from factory (Oakland) with one ton brakes it has new ball joints and tie rod ends plus we turned the drums and replaced wheel bearings, brake pads and wheel cylinders. I feel really bad about just dropping these of at the scrap yard. I'm located in the bay area in California. I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts. Third item is a 305 v6 that came out of the GMC, it ran fine when we pulled it out (probably ten years ago) It has the bell housing for the sm420. Fourth item is the rear end out of the Chevy, I'm not even sure what it is but it needs to be rebuilt that is for sure. sorry for the crappy pictures! I can get better ones and I will get some of the engine as well. It is buried in the back of the garage, I haven't seen it in many years. v
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I wouldn't mind taking the dog off your hands! :lol:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Edited by Forum Staff
This thread is for our generous members willing to give away parts for free. NOT for members to ask for free parts. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
" I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts" |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
While I don't need all of the other parts, I would be more than happy to pay the freight on that bell housing if you would be willing to ship it to Fresno. I could even meet you part way and cover your costs on the gas, meet you in Gilroy, etc.
Just need to confirm that the bellhousing has the fork opening and the mount on the passenger side? Tom |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a nice clean gas tank. Outside of Philly. Prefer pickup. Can send photos if interested.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
I have 2 lenses for a fleetside. Original GM, Good shape except for a slight sliver of plastic on one of them you can see in the pictures. Just dirty, should clean up well. Yours for the taking, just shipping.
Thanks John |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Right now the lenses are being taken by Grizz1963. I will let you know if it falls through.
Thanks John |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a 65 LWB frame only. No suspension. Will not ship. Grand Rapids area
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Free to anyone that wants to come pick up. I'm in Seattle (Greenwood). Steering column support and clutch petal for 60-66. Exactly as pictured.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Parcel landed. Next step is repair cracked side and then proceed with polishing etc. |
All times are GMT -4. The time now is 03:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com