Re: Starting a 52 Chevy 3100 Project.
beautiful work!
|
Re: Starting a 52 Chevy 3100 Project.
Nice looking battery tray. I probably would have done the same but I have a horn in the way on that fender. Hopefully easy to unbolt from the fender if you ever need to remove your fender for work on the headers or starter.
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Starting off by using paint remover on the doors. It actually removed quite a bit. Next it to use knot twisted wire cup brush to get the rest off. More work than I thought it was going to be.
|
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Almost have the doors stripped and should have them painted in the next week. Also want to get the bumper mounted.
|
Re: Starting a 52 Chevy 3100 Project.
looks super great! always love a project where the stated goals are the eventual outcome.
nice work, nice work, nice work. I said it three times because one wasnt enough and two still didnt get the point across. |
Re: Starting a 52 Chevy 3100 Project.
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Got the doors on today. The high was only 101 although Wednesday its supposed to be 111 degrees. They need some work and so do the windows but I just want to get them on there. I found someone through a friend to do the wiring for $400. He will get it done way faster than what I would.
|
Re: Starting a 52 Chevy 3100 Project.
Looking good! Pretty sure my first drive I didn't even have doors. I was too excited to hear it run and go for a drive haha.
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
2 Attachment(s)
Got the front bumper mount made and the bumper mounted. I will post pictures of the actual mount later. The bumper is about 2.5 inches back than stock.
|
Re: Starting a 52 Chevy 3100 Project.
gorgeous man!
|
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Oh if anyone has a passenger side front fender support laying around let me know. I can't seem to find one.
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
Thanks!!!! The new grill and bumper made a big difference. |
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
A wire brush and a little POR15 and now I need to put these bad boys on. Thanks to the person who helped me get the other side.
|
Re: Starting a 52 Chevy 3100 Project.
2 Attachment(s)
Had surgery on my wrist about 3 weeks ago and haven't really done much. Put the logo on the door and rusted the door today. Threw some plywood in the bed. Going to use it as a Halloween prop on Thursday.
|
Re: Starting a 52 Chevy 3100 Project.
gorgeous man! get better!
|
Re: Starting a 52 Chevy 3100 Project.
Nice work !
what is your method of 'Rusting'? |
Re: Starting a 52 Chevy 3100 Project.
In my opinion tucking in the front bumper is one of the most worthwhile modifications one can make to our trucks. Kind of a chip foose thing....."should have come that way from the factory " haha.
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
Quote:
Quote:
|
Re: Starting a 52 Chevy 3100 Project.
Thanks for the recipe.
Nice looking truck |
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Thanks guys. Used it as a prop for Halloween today.
|
Re: Starting a 52 Chevy 3100 Project.
1 Attachment(s)
Getting all switches and electrical installed. Stereo looks good.
|
All times are GMT -4. The time now is 12:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com