The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The 60-66 "PAYING IT FORWARD" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=671262)

LDO 12-05-2015 09:38 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Interested in the bed braces but it would require shipping.

The_Hub 12-14-2015 01:41 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
I've go two parking lamp buckets for a 62-66. Good shape. lenses are melted out. $10 for shipping and they're yours! It's an extra set I don't need.

aggie91 12-14-2015 11:04 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by aggie91 (Post 7398490)
Wayno - Are the motor mounts/stands still available? Are they for a 6cyl? If they fit in a USPS Medium Flat rate box, I would be interested in getting them for the cost of shipping. My even consider the hood hinges if both can fit into a Large Flat Rate box.

Karl

Quote:

Originally Posted by wayno (Post 7392144)
motor mounts
chrome bed strips for short bed stepside
hood hinges and springs
speedo labels and gas pedal (both new in bags)
emergency brake cables - both in very good shape.

Wayno - Have you had any chance to look into the motor mounts/stands and the hood hinges?

Thanks!

Frank63 12-22-2015 09:52 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
I have an in-cab gas tank out of a 64 complete with sender. I am not sure if the sender is any good, but the tank looks pretty clean.

Local pick up

Figuarus 12-22-2015 11:00 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Im interested in the filler neck. Would you separate them?

Frank63 12-23-2015 01:44 PM

Quote:

Originally Posted by Figuarus (Post 7419948)
Im interested in the filler neck. Would you separate them?

I can separate the filler neck and cap. Do you need the plastic part that comes through the cab or the metal part bolted to the tank?
Posted via Mobile Device

PSU1965 12-27-2015 12:27 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Edit by Forum Staff
This thread is for members who are generously willing to donate parts. NOT for someone asking for free parts.
If you'd like to post a "want-to-buy" thread, just become a supporting member and post in the parts for sale section.

PSU1965 12-27-2015 01:43 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Probably would have gotten the point WITHOUT the caps but thanks for setting me straight.

LostMy65 12-28-2015 10:48 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.
http://i1106.photobucket.com/albums/...psac9dnb5b.jpghttp://i1106.photobucket.com/albums/...pssrhabngb.jpg

wayno 01-01-2016 01:54 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by aggie91 (Post 7409760)
Wayno - Have you had any chance to look into the motor mounts/stands and the hood hinges?

Thanks!

Hood hings are gone and I don't know whether those are 6 or 8 cyclinder motor mounts - you are welcome to them - pm me with an address and I'll try to ship them saturday morning.

1966burb 01-10-2016 09:41 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 1/2 inch REAR Lowering blocks off of 1966 C10 Suburban. Will fit C10 pickup with rear coil suspension also. FREE Call or text Jim 360-410-0103

1966burb 01-11-2016 11:24 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Lowering blocks are spoken for. J

sampsmit000 01-19-2016 01:55 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by LostMy65 (Post 7426449)
I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.
http://i1106.photobucket.com/albums/...psac9dnb5b.jpghttp://i1106.photobucket.com/albums/...pssrhabngb.jpg

Would you ship it to 84043?

Eric15chevys 01-23-2016 04:39 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
I have both lower firewall/footwell and the area under the seat. They came from a wrecked 61 and are in very good shape. I am in central North Carolina near 95 if anyone wants to pick them up. Otherwise PM me.

LostMy65 01-23-2016 04:49 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by LostMy65 (Post 7426449)
I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.
http://i1106.photobucket.com/albums/...psac9dnb5b.jpghttp://i1106.photobucket.com/albums/...pssrhabngb.jpg

This is gone.

sharkskinman 01-24-2016 03:40 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
I'm in New Orleans...WOO Mardi Gras!!
Off 65 short
I've got
- 3 6 lug wheels (keeping one for spare) have 235s n 31s
- 2 hood blinkers w/lenses I think and 1 chrome bit
- Really good condition grill (white pearlescent-small dent barely noticeable)
got it for free giving it for free.. Doesn't fit look of my truck at all ��
- 67- repair manual in ok condition


Small bits can be shipped for cost
Grill would rather not
All I can think of at the moment on Chevy truck parts

Let me know if there's Anything Free in/around my area!!

!!Fantastic Thread!!

Mikes66ChevyC10 01-24-2016 05:21 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

http://imagizer.imageshack.us/v2/640...910/HnIoy8.jpg
http://imagizer.imageshack.us/v2/640...908/k1BSsO.jpg
http://imagizer.imageshack.us/v2/640...909/izeWKz.jpg

rickoner 01-24-2016 06:04 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by sharkskinman (Post 7459504)
I'm in New Orleans...WOO Mardi Gras!!
Off 65 short
I've got
- 3 6 lug wheels (keeping one for spare) have 235s n 31s
- 2 hood blinkers w/lenses I think and 1 chrome bit
- Really good condition grill (white pearlescent-small dent barely noticeable)
got it for free giving it for free.. Doesn't fit look of my truck at all ��
- 67- repair manual in ok condition


Small bits can be shipped for cost
Grill would rather not
All I can think of at the moment on Chevy truck parts

Let me know if there's Anything Free in/around my area!!

!!Fantastic Thread!!

If you decide to ship the grill, I'd take it.

sampsmit000 01-24-2016 06:06 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
2nd in line for the grill if you decide to ship!

Grizz1963 01-24-2016 06:47 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by Mikes66ChevyC10 (Post 7459635)
I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

http://imagizer.imageshack.us/v2/640...910/HnIoy8.jpg
http://imagizer.imageshack.us/v2/640...908/k1BSsO.jpg
http://imagizer.imageshack.us/v2/640...909/izeWKz.jpg

I built one of those Cab Lifts before, they are awesome tools.

Look here at how a small lady, with a baby on the hip, one handedly lifts off a cab.

https://m.youtube.com/watch?v=vfTC9wyQKK0


Less than sixty seconds......

https://m.youtube.com/watch?v=LxcuePYK-8Q


And the Dolly will be brilliant too.

I do hope someone sees it and needs it.

60chevyjim 01-24-2016 10:39 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by Mikes66ChevyC10 (Post 7459635)
I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

http://imagizer.imageshack.us/v2/640...910/HnIoy8.jpg
http://imagizer.imageshack.us/v2/640...908/k1BSsO.jpg
http://imagizer.imageshack.us/v2/640...909/izeWKz.jpg

hi mike wish I was closer to you so I could pick them up.
but im in nc.
if you do take them apart to scrap them .
I would pay the shipping to get the set of 4 casters .
thanks jim

Crazy Rusty 01-24-2016 10:45 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
I see someone else is already trying to give away an in cab tank but I'll offer mine as well anyhow. Free for local pickup in Western Washington from a 65 C10. Looks solid, no rust. Not even any smells until I disconnected it. Straps and mounts (if I can get them out) included.

aggie91 01-25-2016 01:22 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
I got the mounts Wayno, Thanks!

Figuarus 01-25-2016 02:49 PM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Crazy, PM Sent

sofilofi 01-26-2016 10:11 AM

Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:

Originally Posted by 1966burb (Post 7442869)
1 1/2 inch REAR Lowering blocks off of 1966 C10 Suburban. Will fit C10 pickup with rear coil suspension also. FREE Call or text Jim 360-410-0103

Got the blocks Jim,thank you.


All times are GMT -4. The time now is 12:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com