The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today part III (https://67-72chevytrucks.com/vboard/showthread.php?t=644788)

forestb 05-16-2016 11:51 AM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Put my gauges in the freshly painted gauge cluster panel and bezel.

joe dirt 05-16-2016 12:06 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
digging into what i thought was a good hood

Backpayne 05-16-2016 06:14 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Lugnutz, here are a couple of pictures of the throttle connection on my 32/36.

Lugnutz65 05-16-2016 08:34 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by Backpayne (Post 7595264)
Lugnutz, here are a couple of pictures of the throttle connection on my 32/36.

Thanks. Those are helpful. My Weber might get a similar throttle connection although I do have the option of a throttle cable system.

robber grin 05-16-2016 09:32 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
resin coated my first ever attempt at a rad shroud

Northwest Outlaw 05-16-2016 09:46 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
got the new brake system connected and hard lines ran

jbgroby 05-16-2016 10:31 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Got my in the bed spare tire mounted. Some days I get a few things done, some days I don't.

siggyfreud 05-16-2016 11:09 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by forestb (Post 7594856)
Put my gauges in the freshly painted gauge cluster panel and bezel.

Very clean, I like it!

robber grin 05-17-2016 09:38 PM

Re: What did you do to your truck today part III
 
4 Attachment(s)
This afternoon was as much like old times as it's been in quite some time.

Applied a second coat of resin to the fan shroud.

Fab'd some brackets to hold it to the core support and shot them with rusto.

Swapped out the gray seat belts for red, then installed the bench seat.

Put away tools, swept the garage and called it a day!

Johnny_Lamebridge 05-18-2016 11:21 AM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by robber grin (Post 7596663)
Applied a second coat of resin to the fan shroud.

The fan shroud is an interesting DIY project. Is that your own idea?

Nice interior in your truck by the way. I like it, but I don't usually get along very well with white seats. :lol:

robber grin 05-18-2016 01:57 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by Johnny_Lamebridge (Post 7597162)
The fan shroud is an interesting DIY project. Is that your own idea?

Nice interior in your truck by the way. I like it, but I don't usually get along very well with white seats. :lol:

First saw it done on another board; it's on u~tewb as well and thanks!

60chevyjim 05-19-2016 10:41 PM

Re: What did you do to your truck today part III
 
I like your interior. my 59 elcamino is all white tuck n roll .

robber grin 05-20-2016 07:53 AM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by 60chevyjim (Post 7598777)
I like your interior. my 59 elcamino is all white tuck n roll .

thanks jim

You just made me flash back to AG: "That's *****in' tuck and roll! You know, I really love the feel of tuck and roll upholstery."

ironman3452 05-20-2016 10:25 AM

Re: What did you do to your truck today part III
 
took grill off and worked on getting the dents out, cleaned out all the birds nest behind it, will work on the rad support and clean up some rust, lots of it here, will patch some rust holes, and try to get it all back together.

chevy2tom 05-20-2016 11:27 AM

Re: What did you do to your truck today part III
 
Th350 craped the bed so I'm pulling it to install a performance built 200 4r http://i1109.photobucket.com/albums/..._102015005.jpg

60chevyjim 05-20-2016 10:07 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by robber grin (Post 7599031)
thanks jim

You just made me flash back to AG: "That's *****in' tuck and roll! You know, I really love the feel of tuck and roll upholstery."

AG is my favorite car movie ever .
I have a yard full of cool old 50s and 60s chevys and
a chevy powered chopped 50 ford tudor .

robber grin 05-21-2016 05:52 AM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Bought a new top-post battery for it, got it insured and registered, installed my new PA license plate, installed the 61 hood, park lamps, and harness from American Autowire, seam sealed the passenger side bed panel, fiberglassed the shroud one more time with mat...

Now I need to pull the shroud off the buck, and finish the body work on it before installing, then finish the engine wiring before Dwayne's takes it Monday for final touches, dual exhaust, and inspection.

WOW - FOUR YEARS LATER

phillip123hastings 05-21-2016 07:57 AM

Re: What did you do to your truck today part III
 
Made a new CD compilation for a road trip :)

Backpayne 05-21-2016 01:05 PM

Re: What did you do to your truck today part III
 
Took my truck in to have mufflers moved further back and exhaust pipes exit behind the tires. NOPE! $440 for that?! Good God!

No way this is typical cost, is it?

forestb 05-21-2016 01:27 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by robber grin (Post 7599031)
thanks jim

You just made me flash back to AG: "That's *****in' tuck and roll! You know, I really love the feel of tuck and roll upholstery."

"You can touch it if you want, i mean you can feel it, I mean can I give you a ride" 😳

Backpayne 05-21-2016 03:21 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Lowered the rear of the truck with 300 pounds of play sand and two knuckleheads. I am guessing the rear springs are from a Jeep, because they are weak.

Love the leveled look though.

The Rocknrod 05-21-2016 03:40 PM

Re: What did you do to your truck today part III
 
Looks great. Now you just lower your front end a bit and you'd be Throwin Down Like a Motown Clown.

chad64chevy 05-21-2016 06:17 PM

Re: What did you do to your truck today part III
 
5 Attachment(s)
got my buddy buckets seat covers from 'Truckseats' on the forum, long wait but look awesome! it's hard to get a pic of the gray just right, but it's a warm gray, light color! also bought a yard of the same gray to get the armrest, sun visors, an half wrap steering wheel covered all in the same gray

they look really good in person

robber grin 05-21-2016 07:35 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Quote:

Originally Posted by robber grin (Post 7595488)
first ever attempt at a rad shroud

This evening the shroud is off the buck, trimmed, test fitted, and drying from one last complete coating of resin.

jteck10 05-22-2016 12:17 AM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Painted and installed a new bumper on Loretta today, new hood and fender to follow


All times are GMT -4. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com