The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today part III (https://67-72chevytrucks.com/vboard/showthread.php?t=644788)

66Submarine 07-31-2016 11:31 PM

Re: What did you do to your truck today part III
 
Killed it?

TJ's Chevy 07-31-2016 11:38 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Quote:

Originally Posted by 66Submarine (Post 7670439)
Killed it?

Blew a freeze plug. lol And ended up pulling the dang motor because it needed new front and real main seals and new gaskets anyhow. SO I have a new gasket set coming and will take the engine apart and clean all the sludge out and reseal and repaint. Oh, Here is a picture of the clutch and pressure plate. They look fine right? :waah:

forestb 08-01-2016 03:45 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Started varnishing my bed wood on Saturday. It started to bubble a little at the surface. Thinking it is because of heat. Will nock it down with some steel wool and give it another coat.

TJ's Chevy 08-02-2016 09:40 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Started painting the 305 v6. Got the oil pan, valley pan, and motor mounts painted up. Waiting on parts so I am gettin her perrtied up.

TJ's Chevy 08-06-2016 12:26 AM

Re: What did you do to your truck today part III
 
4 Attachment(s)
Getting more done. Valve covers came out better than expected.

Jdm63 08-06-2016 09:33 AM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Finished up steering - thanks again Captainfab for the adapter plate

karlbenz 08-06-2016 09:49 AM

Re: What did you do to your truck today part III
 
got my speedometer cable put in. napa #bk6151606

New wiper arms and blades from oreilys. ya gotta get the "classic" blades

got the material cut for the new gas tank. looking forward to freeing up the space behind my seat :)

karlbenz 08-06-2016 09:53 AM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by Hugh in NC (Post 7654194)
Project Fix-a-Leak.

Radiator started leaking around the top seam. The radiator did not look to be in the best condition so I replaced it with an American Eagle 2 row with 1 inch tubes.
http://i231.photobucket.com/albums/e...pspimlkemj.jpg

http://i231.photobucket.com/albums/e...psjmrzqurl.jpg

I got the same radiator. works great so far. found out later that american eagle is another name for champion which has excellent reviews

TJ's Chevy 08-08-2016 10:57 AM

Re: What did you do to your truck today part III
 
4 Attachment(s)
Yesterday evening:

Hugh in NC 08-08-2016 08:06 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by karlbenz (Post 7675321)
I got the same radiator. works great so far. found out later that american eagle is another name for champion which has excellent reviews

American Eagle is the premium version of Champion. It has larger 1 inch tubes.
Champion 2 row has .75 inch tubes.

Narxoleptic Customs 08-09-2016 12:26 PM

Re: What did you do to your truck today part III
 
Bought a power steering conversion bracket!

NVS-C10 08-09-2016 07:46 PM

Re: What did you do to your truck today part III
 
I finally finished up the wood door to cover the air bag setup and topped it off with a bottle cap opener to use as a handle in opening the door.. it also doubles as the perfect tailgating accessory! :alky:

http://i279.photobucket.com/albums/k...psei2af2zx.jpg

http://i279.photobucket.com/albums/k...pstfe3zxvf.jpg

http://i279.photobucket.com/albums/k...psfw2paq7p.jpg

forestb 08-10-2016 04:23 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
got it back from paint

LVPhotos 08-10-2016 06:01 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
Poked a 2"x2" hole to use the new shifter.

karlbenz 08-11-2016 08:14 AM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by Hugh in NC (Post 7677580)
American Eagle is the premium version of Champion. It has larger 1 inch tubes.
Champion 2 row has .75 inch tubes.

yep, thats why I went with that one

Where bouts are you in NC?

karlbenz 08-11-2016 04:41 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Finally got my tank built and installed. 30 gallon. I think my fuel gauge is bad? Stays pegged at full

goatless 08-11-2016 05:10 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by NVS-C10 (Post 7678566)
I finally finished up the wood door to cover the air bag setup and topped it off with a bottle cap opener to use as a handle in opening the door.. it also doubles as the perfect tailgating accessory! :alky:

Is this just stained plywood? Looks great, whatever it is! I'd like to duplicate.

NVS-C10 08-15-2016 04:57 PM

Re: What did you do to your truck today part III
 
Quote:

Originally Posted by goatless (Post 7680533)
Is this just stained plywood? Looks great, whatever it is! I'd like to duplicate.

The bed is made up of "common wood" boards from Home Depot that have been stained and sealed with Olympic Maximum stain and sealant in one. The door over the airbag system is plywood with the same stain/sealer.

Thanks!

The Rocknrod 08-15-2016 05:59 PM

Re: What did you do to your truck today part III
 
Got the rear end mounted on the trailing arms and on jack stands - Shhhhhhh (don't tell the wife) I'm not supposed to be working on the truck yet (I'm in post op recovery). :) :) :)

Northwest Outlaw 08-31-2016 12:29 PM

Re: What did you do to your truck today part III
 
2 Attachment(s)
I was able to score a Lokar shifter for my th400 on Craiglist, with a set of shorty header (unused) for $75 total!! The shifter didn't have the mount hardware or linkage, so...

RKS0069 08-31-2016 01:16 PM

Re: What did you do to your truck today part III
 
3 Attachment(s)
Hi. Finally started back up a month ago and I'm making okay progress. I quit my job in order to work on this truck full time. Moving to Oregon soon!

canadian_diesel1964 08-31-2016 05:42 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Micro buck build looking like a truck again...

Figuarus 08-31-2016 05:55 PM

Re: What did you do to your truck today part III
 
:metal:RKS, what are those tanks? you have a build page on what you're doing there?

RKS0069 08-31-2016 07:11 PM

Re: What did you do to your truck today part III
 
1 Attachment(s)
Quote:

Originally Posted by Figuarus (Post 7700333)
:metal:RKS, what are those tanks? you have a build page on what you're doing there?


Tanks are from LMC

http://67-72chevytrucks.com/vboard/s...d.php?t=675881

chevy2tom 09-04-2016 03:36 PM

Re: What did you do to your truck today part III
 
Painted black behind the grill, white around the eyebrow, new chrome bumper, grill & bezels plus it's my new wallpaper on my phone http://i1109.photobucket.com/albums/...2_151015-2.jpg


All times are GMT -4. The time now is 11:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com