|
Hello
Hello
|
Re: Hello
Hi.
|
Re: Hello
:hi:
|
Re: Hello
GOMER Say's HEY!!!
|
Re: Hello
Hello, to a man of few words;)
|
Re: Hello
Howdy
|
Re: Hello
How do I upload multiple photos?
|
Re: Hello
1 Attachment(s)
This is my truck project. It's since been finished and once I fugure how to load photos faster I'll chuck em up.
|
Re: Hello
1 Attachment(s)
No explanation needed?
|
Re: Hello
1 Attachment(s)
Floor repair
|
Re: Hello
1 Attachment(s)
Cab mounts
|
Re: Hello
1 Attachment(s)
Frame painted and 8.8 installed
|
Re: Hello
1 Attachment(s)
Had to raise the tunnel cause I lowered the body mounts a bit
|
Re: Hello
1 Attachment(s)
Mocked up engine and trans
|
Re: Hello
1 Attachment(s)
Fitted and rolled outside for a look
|
Re: Hello
1 Attachment(s)
Bought some boat trailer fenders bead rolled the face and welded them in
|
Re: Hello
1 Attachment(s)
Decided to scrap the old beater box sides and make my own, I've never built anything before so it was a long time to finish.
|
Re: Hello
1 Attachment(s)
Starting to look like something.
|
Re: Hello
1 Attachment(s)
I'm attempting to build a box for the box, for battery and fuel cell.
|
Re: Hello
1 Attachment(s)
Stepping down to the wood as they say.
|
Re: Hello
1 Attachment(s)
Decided to move the gauge over and the column too.
|
Re: Hello
1 Attachment(s)
Column fitted
|
Re: Hello
1 Attachment(s)
Gauges fit well.
|
Re: Hello
1 Attachment(s)
Leather seat from a early 2000's crew cab Chev. It's a rear seat too.
|
Re: Hello
1 Attachment(s)
Finished the tool box and was able hide all the bolts and hinges.
|
Re: Hello
1 Attachment(s)
Cab in primer and almost ready.
|
Re: Hello
1 Attachment(s)
Not much room in my little 22x22 shop for a first attempt at painting and body work.
|
Re: Hello
1 Attachment(s)
Started paint, lots of work. Tripping all over everything.
|
Re: Hello
1 Attachment(s)
Paint dried and reassembly starting.
|
Re: Hello
1 Attachment(s)
Finally on the ground and respectable looking.
|
Re: Hello
1 Attachment(s)
Finally out for a photo and fresh air.
|
Re: Hello
1 Attachment(s)
383 and 700r4
|
Re: Hello
1 Attachment(s)
One of the many hurdles of a project. This one snuck up on me when the hood wouldn't close because the stock rad hit the hood and I didn't check it in mock up. Whoops.
|
Re: Hello
1 Attachment(s)
Thought I'd try my luck at some home built cal-tracs
|
Re: Hello
1 Attachment(s)
I think they're gonna work
|
Re: Hello
1 Attachment(s)
One of the first days after finishing.
|
Re: Hello
nice work! thanks for taking the time!
|
Re: Hello
That is a sweet ride and some very nice work.
|
Re: Hello
Thanks fellas. I'll try to post more build photos.
|
Re: Hello
Welcome to the group, did some great work, and have a sweet ride...Jim
|
| All times are GMT -4. The time now is 01:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com