|
Lets see your Toolbox!
2 Attachment(s)
heres my baby.
|
Re: Lets see your Toolbox!
|
Re: Lets see your Toolbox!
Nice boxes Longhornman. Gotta love a Snap-on masters series:metal:
|
Re: Lets see your Toolbox!
|
Re: Lets see your Toolbox!
1 Attachment(s)
Heres's a pic of my cheap boxes. Kinda hard to see with all the other junk. One day I will step up to a real box but these have been ok so far.
|
Re: Lets see your Toolbox!
nothing at all wrong with a couple craftsman boxes... thats what i was expecting to have to use in my garage untill i scored on the purple thing
|
Re: Lets see your Toolbox!
If i need valve covers, scoops, & tunnel ram parts i know were to go:ito: nice set up.
|
Re: Lets see your Toolbox!
1 Attachment(s)
Only pic I have on my computer. I have a ton on film for insurance. Matco with hutch and side locker with drawers. I also made a pry bar, large screwdriver attachment that hangs on the side. I'll look for better pics later.
|
Re: Lets see your Toolbox!
if i had the kind of money it required to buy toolboxes like that, I woulda paid someone to finish my truck for me ;)
|
Re: Lets see your Toolbox!
I'll probably be spending a few hundred on a Craftsman one as well. It's all I'll need for what I have. Now if I could get my garage cleaned out....
|
Re: Lets see your Toolbox!
that's what i've got. a ball bearing craftsman unit simiar to what RatRod has above on the right a few posts up.
Worth every dollar, and pretty much all the space i need. I built in shelving throughout the garage to put the big stuff, power tools, etc. funny part is, even with that toolbox, the stuff I use 99% of the time is in a custom-molded Crescent brand toolkit (Costco, $35) that's like this, but with 5x as much stuff (mostly sockets and wrenches) http://i.ehow.com/images/GlobalPhoto...olkit_Full.jpg |
Re: Lets see your Toolbox!
|
Re: Lets see your Toolbox!
Man, that drawer set up is sweet! You'll know right away if your missing a socket, instead of months after you actually lost it when you really need it!
|
Re: Lets see your Toolbox!
2 Attachment(s)
Here is mine and my cart. A little messy from doing the motor in the truck. The most recent I have. Sorry the pics aren't better.
|
Re: Lets see your Toolbox!
2 Attachment(s)
here is the one I have in my garage at home....you can see it in there and it is full of all the necessary tools including impacts and all.
|
Re: Lets see your Toolbox!
1 Attachment(s)
Those drawer insets are nice.. I just shove stuff around until it lies flat enough for the drawers to close! lol
|
Re: Lets see your Toolbox!
1 Attachment(s)
Here's mine, I could use another one about the same size. I still have tools piled on my work bench that I couldn't fit in there.
|
Re: Lets see your Toolbox!
1 Attachment(s)
I really take time to clean it after each use. I have built some serious horsepower with this baby......usually while wearing my flip-flops!!!!!
|
Re: Lets see your Toolbox!
2 Attachment(s)
work
|
Re: Lets see your Toolbox!
Quote:
:lol::lol::lol::lol::lol::lol::lol: Whats the No 2 pencil for |
Re: Lets see your Toolbox!
Marking cut lines silly!!!
|
Re: Lets see your Toolbox!
:haha::haha:
Quote:
|
Re: Lets see your Toolbox!
3 Attachment(s)
I buy the Craftsman boxes at the Sears outlet.
Usually scratch and dent Usually 40-50% off I watch for yard sale stuff too. |
Re: Lets see your Toolbox!
1 Attachment(s)
Best shot I have of mine right now.
|
Re: Lets see your Toolbox!
2 Attachment(s)
Eventually I will need a toolbox but for now a peg board, bucket and boxed socket set work for me.
I have a matching bucket inside so I don't have to walk all the way out to the garage for tools. I had a nice set in my truck toolbox but someone else thought they needed it more than I and stole it! |
Re: Lets see your Toolbox!
1 Attachment(s)
Here is my version of "the bucket" (and some weed-wackers I am fixing)
It's the same thing plebotomists carry around in the hospital.. lol |
Re: Lets see your Toolbox!
I see a stihl.....that's some good stuff right there!
|
Re: Lets see your Toolbox!
Quote:
|
Re: Lets see your Toolbox!
5 Attachment(s)
This is my junk. Nuttin' fancy, but it works for me.
If I have to go more than about 150 miles, or so, and I'm not sure of the services ahead of me; I roll with my "auxiliary gas tank". |
Re: Lets see your Toolbox!
3 Attachment(s)
The toy room
My main two for the tools the one big red Harbor Freight Chest/Box, and the smaller black one which is a cheapie HF version. A small, very old Craftsman to keep oddities, then a I dunno what brand, holding my air tools. I got two small boxes I carry in my truck at all times also. |
Re: Lets see your Toolbox!
i dont bother spendign big on boxes..i have a nice in bed box for all my "oh crap and recovery gear"
and this is my wall of crap.. each wrench has at least two minus the 1in plus club.. (i dont that many big machines) but theya re scary to swing at teenagers starting crap but i love it..and i can FINALLY find my damn vicegrips http://i295.photobucket.com/albums/m...k/DSC00986.jpg |
Re: Lets see your Toolbox!
Who's the little cutie in the doorway, Justin?
|
Re: Lets see your Toolbox!
1 Attachment(s)
here is mine
|
Re: Lets see your Toolbox!
Lets see some more. Wheres all the waterloo & cornwell boxes?
|
Re: Lets see your Toolbox!
1 Attachment(s)
Here is mine at work
|
Re: Lets see your Toolbox!
that's my littlest Autumn, the little man is matty.. and the tall one is Kirstin
those are my special tool helpers... http://i295.photobucket.com/albums/m...DSC00909-1.jpg http://i295.photobucket.com/albums/m...s/DSC01119.jpg |
Re: Lets see your Toolbox!
|
Re: Lets see your Toolbox!
wow show off hahah
|
Re: Lets see your Toolbox!
2 Attachment(s)
Heres a few of mine
|
Re: Lets see your Toolbox!
I started with a cheap ($200) Husky box that came with a nice socket set that my parents bought me for me hs graduation, then one day the Cornwell guy offered me $400 trade for it so I said deal! Ended up with what is basically a cart sized full box, I'll get a good pic of it sometime. It's small but since I stopped turning wrenches for a living I quit buying tools. It still lives at the dealership for when I wanna go over and tinker.
We've a couple Craftsman boxes with the basics at home and a big locker to keep all the misc stuff in. I really wish I had a pic of the Snap-On box the local college auto program has, they got it while I was there, it's a black 144" series, that's right, 12 feet! It's HUGE and awesome. It listed for something like $25k but the college got in dang near half price, still a lot of money, but it is a lot of toolbox. Found a vid- |
| All times are GMT -4. The time now is 12:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com