![]() |
Parting out 62 C30
5 Attachment(s)
I'll be parting this truck very soon unless somebody is interested in the complete truck. The truck was last driven on the road in 2011, has not been started in a couple years but should run with some tinkering. Tires, clutch, and exhaust were new in 2010. Now needs a rear brake line and some electrical work. Body is very rusty, doors are in bad shape. Lower fenders are shot , inner fenders rusted out, rust above windshield, bed wood is rotten. 283\4 speed. $1800 as it sits.
Located in Blacksburg, VA |
Re: Parting out 62 C30
4 Attachment(s)
more pics.
|
Re: Parting out 62 C30
Dibbs on the grille if you part it. Does it have PS? Any dash pics?
|
Re: Parting out 62 C30
Got any better pictures of the engine and also the interior?
|
Re: Parting out 62 C30
4 Attachment(s)
Does not have PS.
No engine pics yet, here's a few interior pics: |
Re: Parting out 62 C30
would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night.
Thanks |
Re: Parting out 62 C30
I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale.
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
id be interested in the hood ordainment and the radio delete plate and windshield wiper retainer nut / knob
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Looking for a stock air cleaner, if it's still there...
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
4 Attachment(s)
more pics:
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
I'm interested in the bell housing.
|
Re: Parting out 62 C30
Alright, I'm parting the truck. 62 Barnfind has dibs on the bell housing and horseshoe mount. Everyone else who has posted here will be contacted regarding their requests.
I will be pulling parts this weekend. I don't have PayPal so payment will be USPS money order, check or cash. All parts are plus shipping. Small stuff will ship typically by USPS, larger stuff by FedEx or Fastenal. |
Re: Parting out 62 C30
I would guess that 62Barn is going to need that V8 throttle lever too....
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Six wheels and tires. Tires were new in 2009\2010 and have between 2000-3000 miles on them. Front are radials, rears are bias ply 16.5x75. Front rims and outer rear rims are the later style (drop center?), inner rears are the original style flat base. $300, local pickup is preferred.
|
Re: Parting out 62 C30
Quote:
How big of a patch do you need? |
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Is that a hazzard flasher knob? if so I take it? 20$ plus the ride? Shipping 93291-8103
|
Re: Parting out 62 C30
2nd on the grill depending on price. is the engine original to the truck? how much for it complete?
|
Re: Parting out 62 C30
1 Attachment(s)
I need a good patch that goes from just above the clutch linkage hole to a little below the gas pedal studs. If u need width & length LMK. Also I have a lead on a patch already, so dont cut anything just yet. Wanted to c if u had it incase the other source doesnt work out.
Thanks Scott |
Re: Parting out 62 C30
Quote:
No problem, send me a PM if your other lead doesn't pan out. Thanks, Phil |
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
I'll take the grill, what is the code on the block at the front of the passenger head
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
That's what I meant, I'll take the grill if it gets to me.
|
Re: Parting out 62 C30
Would it happen to have a "NoSpin " tag? Would probably be behind seat or maybe glove box
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
Quote:
|
Re: Parting out 62 C30
1960 hood with turn signals, has rust, see pics. $150
Pedal assembly, $30 Front bumper, painted, straight, $50 |
Re: Parting out 62 C30
How are the fenders and the front clip with exception of the hood? Also interested in the motor
|
Re: Parting out 62 C30
Front fenders need patches at bottom for sure but may have more rust, I'll have to look closer. Inner fenders are in bad shape. Rad support is crusty.
|
Re: Parting out 62 C30
WOW somebody on here lives really close to me....
|
Re: Parting out 62 C30
Quote:
|
All times are GMT -4. The time now is 01:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com