I need some west coast jr mirrors!
1 Attachment(s)
Does anyone know where i can get some west coast jrmirrors for a 64-66 chevy? new used or reproduction? Painted or stainless? Thanks in advance and for the vast amount of knowledge i've learned from this site! I have attached a picture of what i think i am looking for.
|
Re: I need some west coast jr mirrors!
I got mine off Ebay. They were a bit knarly when they arrived but being made from stainless I was able to polish 'em up.
http://inlinethumb16.webshots.com/46...600x600Q85.jpg http://inlinethumb49.webshots.com/46...600x600Q85.jpg |
Re: I need some west coast jr mirrors!
2 Attachment(s)
I think you can still get some from Re trac. I saw the link on the 60-66 web site. I tried to polish mine but will have to either rechrome them or buy new ones.
|
Re: I need some west coast jr mirrors!
http://www.google.com
click on shopping. search for: west coast jr mirror You could also find a RV store near you and hit up their catalogs. If you were a supporting member, you could put a WTB(want to buy) ad up in the parts board and see what people have. -W |
Re: I need some west coast jr mirrors!
1 Attachment(s)
Advance Auto Parts has these... for $23.64 a piece! And the mirror is stainless.
Here's the link: Cipa Jr. West Coast Mirrors |
Re: I need some west coast jr mirrors!
2 Attachment(s)
Thanks guys but these are the particular ones i would like to find. I beleive them to be factory from the assembly pictures i've found.
|
Re: I need some west coast jr mirrors!
|
Re: I need some west coast jr mirrors!
|
Re: I need some west coast jr mirrors!
1 Attachment(s)
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here
If you need any further assistance with that please contact any Admin for help. |
Re: I need some west coast jr mirrors!
3 Attachment(s)
edited
|
Re: I need some west coast jr mirrors!
I have the CIPA 47500's on my '65 -they look OK till they start to rust, they are poorly designed and poor quality, and one of the mirrors blew out the first time I hit 60mph!
Unfortunately, I think the selection of good, cost effective ones is limited. FWIW, Amazon has a lot of mirrors to choose from, and the prices don't seem too bad. |
Re: I need some west coast jr mirrors!
gcwhite,
those mirrors that you want are the OEM types. I bought a set used for my '65 c10. pictures are here, click on the description for the image another picture is here... it's the image I was sent by the fella I bought 'em from. you can find 'em for sale, as most people take them off their trucks. They shouldn't cost too much. -W oem= original equipment manufacturer another west coast jr. thread with a neat sales literature photo. |
Re: I need some west coast jr mirrors!
Quote:
|
Re: I need some west coast jr mirrors!
Well I guess we were all at fault, even the admin. people. You could've moved the thread, but you can't blame us for trying to help a brother out. Thats why we're here.
|
Re: I need some west coast jr mirrors!
hmmm, I wonder if mine are factory? I'm switching to round SS repops with my rebuild.
Not good pic: http://i1093.photobucket.com/albums/...p/P1270009.jpg |
Re: I need some west coast jr mirrors!
My 66 came from the dealer with these.
www.retracmirrors.com/Product_Line/LD_-_Universal08/Univ_Jr_WC_Assembles08/univ_jr_wc_assembles08.html http://i624.photobucket.com/albums/t...arlotte016.jpg |
Re: I need some west coast jr mirrors!
i have some ford west coast mirrors you can have. they came in a box with my truck when i bought it. :haha: i didnt know that ppl were interested in those.....
|
Re: I need some west coast jr mirrors!
Lucky I came across this topic, I am at this point, repairing the long versions of my West Coast mirrors. Mine have to be the long ones, as I have an 8 foot wide flatbed on the back of my 1 ton. If I can find 'em, new or good used would be easier than piecing my frames back together and welding them up. These guys stick so far out, the previous owner mutant hit everything he possibly could with the driver side, missed everything on the pass side.
|
Re: I need some west coast jr mirrors!
these are the ones on my 1t
ron http://img34.imageshack.us/img34/156...1105101308.jpg By rondavid at 2011-05-10 |
Re: I need some west coast jr mirrors!
Thanks for the picture. Mine look a lot like that in the U shaped frame, have two straight bars as well, per side, one from the upper tube to the rear of the door, the other from the lower tube mount to the upper tube. Your headache rack looks like a dead copy of the one I have, makes the mirrors stick right out there in the breeze, don't they! My flat bed is 8 feet wide, 9 feet, 10 inches long. I take it yours is also a dually as well, being a 1 ton truck.
Your truck is NEAT. My final mod will be trying to find a dually 2 speed rear end, so I can cruise on the road into town at a lazy, comfortable 60 mph, instead of all out, done in, and over revving at 45 to 50 mph. It's either the 2 speed rear end, or, try to find a nice, used, reasonably priced (hahaha, like, that is really gonna happen in my lifetime) Hone inline over drive. I just took a look at your pictures link, EXTREMELY NICE WOOD SPINNING ITEMS. That takes real talent to do. |
Re: I need some west coast jr mirrors!
Quote:
all other ot posts were removed at request |
Re: I need some west coast jr mirrors!
:c2:
|
Re: I need some west coast jr mirrors!
Ok......
Back to the mirrors. OriginalTruckdude, It appears that the ones you have are OEM. The close-up of those would show three vertical lines stamped into the backer plate....the center one being longer. The OE's arm & mounting brackets are very well engineered with virtually no vibration....resulting in no crack-outs of the door skin. Nice truck ya have there. I'd encourage any one who's replacing these mirrors with something else to hang on to the take-offs, no matter the condition, as they're superior to any aftermarkets or repops. I'm sure that they will be snatched up by one of us sooner or later. |
Re: I need some west coast jr mirrors!
Here's some I saw on Craig's list tonight....not mine....not sure if this is what you're looking for but they look pretty good.
http://portland.craigslist.org/clc/pts/2389032474.html |
Re: I need some west coast jr mirrors!
Yippie, hooray, today, I got finished with the refurb of the mirror frame on my flatbed. What a disaster this could have been. I have the wide mirrors, to clear the headache rack, as padresag has, and, mine were obscenely abused. So many BRAZED sections. Many destroy missions on them from armed attackers.
What I did find was that 1/2 inch steel conduit thick wall, is the SAME size as the original tubing, and, all the ends and bents were in great shape, but the straight sections were now pretzels. I replaced all the straight sections in the U shaped frames, and built two strengtheners from scratch. All new nuts, bolts, washers, and I repainted it all with white paint. I figure I saved a lot of money over new hardware. And, of course, 3/4ths through the LAST part to be painted, I ran OUT OF PAINT. So much for putting all that stuff back on the truck tomorrow, it'll have to wait until Saturday, DRAT! So, then I went to address the heater core leak issue, found the core at the live end gone, so, no fixing this one. I have the short core, heater box inside the engine compartment, and want to go to the long 9-1/2 inch long core, but, they are just over the top expensive right now. I can find the standard cores all day long, under 30 bucks, but, only specialty shops have the long core, and they want past a hundred bucks for them, clean out of my money tree's ability to grow funds. I really do like this truck, it is easy to work on, and built for me, dead simple. I can't wait to have the fun of tooling around in this neat old truck! |
Re: I need some west coast jr mirrors!
2 Attachment(s)
Quote:
by chance I found today your tread and thats in my opinion exactly the mirrors they are missing on my truck. I was for a long time locking for the right style. Do you (or somebody from the forum) have some information about these mirrors for me please? |
Re: I need some west coast jr mirrors!
5 Attachment(s)
ttt.
Is there anybody can help me out with information about the right mirrors, see pictures from my brackets: Thanks in advance. |
Re: I need some west coast jr mirrors!
Gerhardh, you might have more answers from the 67-72 portion of the forum. This is 60-66
|
Re: I need some west coast jr mirrors!
Ah again wrong
My fault Thanks for the advise. Take care |
Re: I need some west coast jr mirrors!
I'd search like this - https://www.google.com/search?client...+coast+mirrors
|
Re: I need some west coast jr mirrors!
Thanks Master Chief!
|
All times are GMT -4. The time now is 09:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com