Parting out 72 Suburban K10 350 TH350
 

Parting out 72 Suburban 4x4. THIS TREAD IS FOR THE SUBURBAN 0NLY PARTS. All the common Sub-PU parts are in a thread of there own in the PU board. http://67-72chevytrucks.com/vboard/s...d.php?t=521770 All prices are plus shipping.
Olive green deluxe rear door panels. Nice condition 75.00 pair SOLD
Fuel tank filler neck. 27.50 SOLD
Fuel tank vent tube. 27.50
Rear barn doors upper slides/locks. 35.00 pair
Fuel tank sending unit. Just replaced with new repop. 30.00 SOLD
Tail light lens. Very nice DQ. 12.50 each SOLD
LH barn door lower latch. 12.50
RH barn door upper, lower and center latches. 32.50
Tail light housings 7.50 each
RH rear window regulater. 20.00
LH rear window regulater. 20.00
Exhaust hangers front and rear. 22.50 SOLD
Lock set and switch with matching key. 35.00 SOLD

Re: Parting out 72 Suburban K10 350 TH350
 

pics

Re: Parting out 72 Suburban K10 350 TH350
 

Fuel tank. A few minor dings, very solid, nice inside. 75.00 SOLD
Fuel tanks straps. 25.00 SOLD
Rear AC complete with wiring, cover, and hoses. 175.00
Upper molding kit with barn doors. With all the clips. Very nice condition. No dings. 125.00 SOLD I have a second set for a lift gate.

Re: Parting out 72 Suburban K10 350 TH350
 

how are the headliner panels?

Re: Parting out 72 Suburban K10 350 TH350
 

What headliner panels......worse than bad they are totally gone. Picking up a 72 Tuesday it may have some. Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

Interested in the spare tire clamp if its original. And also looking for a driverside front blinker assembly, dont need the lens. And if possible would need the other plug for blinker assembly. The one that goes into rad. support.
And the outside front bumber brackets if you have any. Thanks Shawn.

Re: Parting out 72 Suburban K10 350 TH350
 

-
Price on the plastic plugs shipped to Iowa 50171.

Thanks.
LockDoc

Re: Parting out 72 Suburban K10 350 TH350
 

I didn't list the spare clamp because I think I have already sold it. 15.00 on a nice turn lens housing. So are you needing a pig tail cut off the main harness? If so 5.00. The front bumper brackets off this are already sold. I'm picking up a 71 K20 tomorrrow. I'll check them and get back to you.
.25 cents each for nice ones. I have save them from the last three sub's parted. They should fit in a envelope. Not sure of that cost, I'll check.

Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

Tom,

Do you have anymore of the upper molding clips? If you'll part those out, how much would you need out of them?
Posted via Mobile Device

Re: Parting out 72 Suburban K10 350 TH350
 

Thanks Tom. I will take all of the plastic plugs, including the larger oval ones. Just figure on putting them in a padded envelope to ship to ZIP 50171 and PM me the total cost and payment info..

LockDoc

Re: Parting out 72 Suburban K10 350 TH350
 

Will take matching lock and key set...can you put with other items and ship all at once?!

Adam

Re: Parting out 72 Suburban K10 350 TH350
 

Tom,, willtake the "Fuel tank filler neck. 27.50", (Thats the one with the
overflow tube ?).
If you haven't sent the headliner bows,and spare tire clamp, maybe
stuff it all in one package,,,
Thanks,,,Pat

Re: Parting out 72 Suburban K10 350 TH350
 

I have some from the third one that I would part with .50 each. How many do you need? I pulled all the moldings except the LH rear and rear doors (they were gone).
Leon, Do you want all that I have among the 4 trucks? Picking up a 72 402 truck tomorrow. I would like to get .50 on the large ovals.
Adam, no problem.
Pat, no I haven't shipped yet. I'll look into putting it with the other stuff and report back.


Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

Do you have a suburban splash shield? The one the goes behind the driver side rear wheel?
If so condition and price.

Re: Parting out 72 Suburban K10 350 TH350
 

[QUOTE=tll74;5346458Pat, no I haven't shipped yet. I'll look into putting it with the other stuff and report back.
Thanks, Tom[/QUOTE]

Thanks,,PM me the $$$,
Pat

Re: Parting out 72 Suburban K10 350 TH350
 

Tom
If you come across a rust free lower DS quarter from rear of driver door to front of wheel arch I would be interested in it. need from the bottom up to the crease just above the lower wide mouldings.

Thanks
Richard

Re: Parting out 72 Suburban K10 350 TH350
 

Money sent for locks...

Re: Parting out 72 Suburban K10 350 TH350
 

Tom,

Yes, I will take the plugs from all of the SUBURBANS.

LockDoc

Re: Parting out 72 Suburban K10 350 TH350
 

Tom,

Still interested in the plastic interior plugs from this thread and the Parchment seat belts from your other Suburban parts thread.

LockDoc

Re: Parting out 72 Suburban K10 350 TH350
 

I sent you a PM yesterday about these. Thanks, Tom
Posted via Mobile Device

Re: Parting out 72 Suburban K10 350 TH350
 

Tom,

Your latest PM didn't make it through. I double checked and the last PM I received from you was 5-4-2012. I guess you will have to try it again.

Thanks.
Leon

Re: Parting out 72 Suburban K10 350 TH350
 

need front and rear bumper brackets for a 4x4

Re: Parting out 72 Suburban K10 350 TH350
 

If you have any plastic plugs left after you take care of tll74 I am interested in a complete set both the small and larger ones.

Thanks
Scott

Re: Parting out 72 Suburban K10 350 TH350
 

Are the front and rear door panels still available?
Posted via Mobile Device

Re: Parting out 72 Suburban K10 350 TH350
 

Do you still have the upper molding trim?

Is there a safe and reasonable (price) way to send to 34953?

Re: Parting out 72 Suburban K10 350 TH350
 

I have the front 71-72 only brackets. Nothing at this time on the rear.

Scott, Leon is getting all that I have for now.
YES they are.
Yes, the trim would ship in a tube and get there with out damage. 23.00 shipping.

Re: Parting out 72 Suburban K10 350 TH350
 

Hey I would like to get the upper trim from you if it is still available; does it still come with all the clips too? I can send money ASAP. Thanks

Re: Parting out 72 Suburban K10 350 TH350
 

Hi John, PM sent

Re: Parting out 72 Suburban K10 350 TH350
 

Would you sell the front spring hangers? If so whats your best price
shipped?
Posted via Mobile Device

Re: Parting out 72 Suburban K10 350 TH350
 

The last two sets I sold here on the parts board sold for 75.00 plus shipping. Shipping would be very close to 15.00, so..90.00 shipped. Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

Hey tom is there rear 2nd seadt or 3rd seatbelts? interested pending price. Thanks

Re: Parting out 72 Suburban K10 350 TH350
 

i'll take the tail light lenses and housings if the back-up lenses are included.

Re: Parting out 72 Suburban K10 350 TH350
 

Can you give me a price for shipping the rear ac to 75165?

Re: Parting out 72 Suburban K10 350 TH350
 

Sorry, no rear seat belts in this one.
50.00 shipped for what your asking for with the reverse lenses. Do you need the reverse housings?
65.00 shipping. The cover makes the box oversize. A little less if shipped to a business.

Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

yes, if they are in good shape.

Re: Parting out 72 Suburban K10 350 TH350
 

How about 60.00 shipped for all of it with the reverse housings. I've already kicked in the lenses. Thanks, Tom

Re: Parting out 72 Suburban K10 350 TH350
 

sounds good. PM me your addy and i'll get a money order enroute Monday.

thanks, Monty

Re: Parting out 72 Suburban K10 350 TH350
 

PM sent

Re: Parting out 72 Suburban K10 350 TH350
 

ttt, still lots left on this one

Re: Parting out 72 Suburban K10 350 TH350
 

Tom - Any idea if these exhaust hangers are similar to those on a K20 pickup? I'd take them if so - if possible I'm hoping to use a second set to create a factory looking dual exhaust system but in a small block truck. Could also use an NP205 skid plate if you have one. Thanks, Pete