Parting out a 72 blazer
 

Parting out what is left of a 72 blazer, wheels, tach dash, gas cap and door panels are not for sale. Blazer has 4 inch lift springs (springs will need new bushings) in the front and blocks in the rear it also has a 2 inch body lift aluminum bushings. It also has a double shock front steering stabilizer, and a roof rack that is complete but some pieces are broken. If you need other pictures let me know.

Lift 200 shipped no shocks (shocks if you want to pay extra shipping but may not be good.)SOLD
Body lift 55 shippedSOLD
Roof rack 100 shipped
Steering stabilizer 25 shipped no shocks (shocks if you want to pay extra shipping but may not be good.)

Re: Parting out a 72 blazer
 

pic x2

Re: Parting out a 72 blazer
 

Interested in hatch and it's attachment parts pending price, pics, condition...saddle defrost vents in good shape?

Re: Parting out a 72 blazer
 

pics x3

Re: Parting out a 72 blazer
 

Hatch is stripped and in very bad shape I will check the vents tomorrow.

Re: Parting out a 72 blazer
 

carpet strips and rear cargo panel trim?

Re: Parting out a 72 blazer
 

No not this one was gone before I got it

Re: Parting out a 72 blazer
 

if you start parting out the frame I may be interested in the engine cradle crossmember.

Re: Parting out a 72 blazer
 

just thought I'd ask :-) looks like you got a couple at your place. looks like I'm going to have to start shopping for Blazers out in PA! Not Michigan! :)

Re: Parting out a 72 blazer
 

Ok I will try and pull it tomorrow send me your zip and I will get you a wuote shipped

Re: Parting out a 72 blazer
 

Interested in gas, and brake pedals, e-brake assembly. Is the floormat any good? Does it have the steering dampener, shock assembly in front?

Re: Parting out a 72 blazer
 

What size are those steel wheels?

Re: Parting out a 72 blazer
 

Before you pull off the engine craddle send me a price Shipping to 48623.
Thanks,
Eric

Re: Parting out a 72 blazer
 

Interested in Wheels also. Looking for 8" wides.

Re: Parting out a 72 blazer
 

Did you just want the brake pedal itself or the bracket that it bolts to also. No floor mat it has a double steering dampener.

Re: Parting out a 72 blazer
 

15 x 8 put sorry not for sale it is on the first post

Re: Parting out a 72 blazer
 

Sorry not for sale it is on first post

Re: Parting out a 72 blazer
 

Any pics on the lift springs?

Re: Parting out a 72 blazer
 

Yeah just the brake and gas pedals (if the chrome trim is good) but also the e-brake complete if it clicks and all that when depressed. Thanks.

Re: Parting out a 72 blazer
 

Hello Eric,

50 shipped, let me know if you are still interested

Re: Parting out a 72 blazer
 

Pics of the front leaf springs

Re: Parting out a 72 blazer
 

Whoops. Missed that.

Re: Parting out a 72 blazer
 

If it has a backseat and belts are saddle I would like to see pic of them
Thanks

Re: Parting out a 72 blazer
 

Does it still have the stock gravel guards between the body and that bumper?

How does the floor look between the drivers seat and the rocker?

Re: Parting out a 72 blazer
 

oh, and does it have the covers where the hatch bolts to the top? they have a bent lip on one end of them.

Re: Parting out a 72 blazer
 

50 sounds like a fair price. I'm pretty sure I still got your email. I will PM you to confirm.
thanks again
Eric

Re: Parting out a 72 blazer
 

Deadhead NM - no saddle vents in the blazer checked my stash and found one if it is the color you are looking for 15 shipped

Dale 99 - I have a post with another floor board if not what you are looking for let me know I have 2 other floors but probably the same condition. This blazer did not have stone guards but I do have another post with them also. I do not know if this one has the covers with the lips on or not will check tomorrow.

http://67-72chevytrucks.com/vboard/s...d.php?t=628126

http://67-72chevytrucks.com/vboard/s...d.php?t=620426

Pound41 - seat belts are rough 25 shipped if interested

Dirt's72 - I will check ebrake tomorrow and let you know. The gas pedal was modified by PO but I do have a 71 if still interested. LMK

Re: Parting out a 72 blazer
 

I posted on your stone guards thread, I would like them.

Floor section has enough meet, I would like a section of the floor if your going to cut it up. Can provide pic of what I need.

LMK on covers with lip.

Re: Parting out a 72 blazer
 

Yes I picture would be great.

Re: Parting out a 72 blazer
 

I read the rest of the floor post, someone has already called for the floor section I need.

Would still like guards, and cover if you have one with lip.

Re: Parting out a 72 blazer
 

Look at the date they never got back to me it is yours if you want it

Re: Parting out a 72 blazer
 

Actually he passed because of shipping if you look down the post further

Re: Parting out a 72 blazer
 

this is what I was needing...

Re: Parting out a 72 blazer
 

I'll take the defrost vent if the tabs are intact (they look to be intact). Thanks for digging it out. Pete

Re: Parting out a 72 blazer
 

I'd like to see the 71 pedal, how's the regular brake pedal?

Re: Parting out a 72 blazer
 

Willing to sell the body of it?

Re: Parting out a 72 blazer
 

The body is real rough but yes I would sell it.

Re: Parting out a 72 blazer
 

Shoot me a pm with a price when you get a chance

Re: Parting out a 72 blazer
 

Dirt's72 please see pictures 60 plus shipping if interested send me your zip and I will get a shipping quote.

Re: Parting out a 72 blazer
 

PM sent

Sorry Pete when I went to put it away last night the light caught it a funny way and it looked cracked. I checked it out better and it is cracked actually both corners but has not opened up yet. I think because it has not worked its way to the edge yet. Both tabs are attached if interested if not i understand.

PM sent