72 blazer 4-spd CST part out
 

I'll get more pictures tomorrow morning. It does have the rear CST channels but I may keep them for myself. I think I'm going to keep this single wall top also but have a decent one I was going to keep for myself that I will be selling.

OEM transfer case skid plate 125 plus shippingSOLD
Skid plate crossmember 75 plus shipping or both for 180 plus shippingSOLD

4spd with column, pedals, linkage, bell, transfer and crossmember 600 plus shipping through fastenal.SOLD

Bucket seats 800 with brackets greyhound or Fastenal SOLD

Rear seat 400 with brackets plus shipping greyhound or fastenal SOLD

Swinging tire carrier 300 plus shipping SOLD

Visors with fasteners 120 shippedSOLD

FORGOT TO MENTION I CAN BRING ANY LARGE ITEMS TO CARLISLE TO SAVE ON SHIPPING.

Re: 72 blazer 4-spd CST part out
 

In line on the cst channels if you sell

Re: 72 blazer 4-spd CST part out
 

Interested in bumper guards

Re: 72 blazer 4-spd CST part out
 

There all bent up

Re: 72 blazer 4-spd CST part out
 

Is there a spare tire carrier?

Re: 72 blazer 4-spd CST part out
 

The swinging tire carrier is the only one.

Re: 72 blazer 4-spd CST part out
 

how much for mirrors, spicer hubs and antenna pending cond

Re: 72 blazer 4-spd CST part out
 

I will take the front leveling mat if it's good.

Re: 72 blazer 4-spd CST part out
 

I'll take the t case skid plate with hardware pending a few pix for $125 shipped to 48092 if interested. Thx

Re: 72 blazer 4-spd CST part out
 

Sorry I meant interior carrier.

Re: 72 blazer 4-spd CST part out
 

Dwayne interested in 4speed set up. Does it have the chrome 4 speed shifter?

Re: 72 blazer 4-spd CST part out
 

Yes, chrome 4 spd and transfer handle not sure how nice the chrome is. Forgot to mention I can bring it to Carlisle.

Re: 72 blazer 4-spd CST part out
 

Keeping the mirrors for now I'll check the other stuff tomorrow.

Re: 72 blazer 4-spd CST part out
 

Ok. I figured Carlisle was a option for you. Of course you know everyone wants to see more pictures of the inside when you get time.

Re: 72 blazer 4-spd CST part out
 

Yea, I'll get some tomorrow, I had to drop the trailer and get to work. Lol, after taking a couple of quick pics.

Re: 72 blazer 4-spd CST part out
 

Dwayne - any oem tinted single wall side glass?

Re: 72 blazer 4-spd CST part out
 

Yes, but I don't want to cut it out of a good top.

Re: 72 blazer 4-spd CST part out
 

Dwayne, any luck on front bumper brackets and oil dipstick/tube?

Re: 72 blazer 4-spd CST part out
 

No engine, only one bracket is bolted to the frame but there are some parts inside. I should be able to look tomorrow and let you know.

Re: 72 blazer 4-spd CST part out
 

Assume it has high hump tranny cover? Is it in good shape? Cost? Can you please share pics of it?

Thanks!

Chad

Re: 72 blazer 4-spd CST part out
 

I'll get some pictures tomorrow but it will go with the tranny if I sale as a package.

Re: 72 blazer 4-spd CST part out
 

Any good hatch latches or center latch cover?

Re: 72 blazer 4-spd CST part out
 

Hey Dwayne. I am interested in the two front bolts for the bench seat. Can you take a few pictures if they are available? Thank you.

Re: 72 blazer 4-spd CST part out
 

In line for the skip plate and the spare tire Carrier

Re: 72 blazer 4-spd CST part out
 

Lower CST brackets for the rear side panels and the brass alignment pieces on the doors?

Re: 72 blazer 4-spd CST part out
 

Not parting the hatch it's in nice shape.

Re: 72 blazer 4-spd CST part out
 

Did you want the skid plate and cross member?

Re: 72 blazer 4-spd CST part out
 

I don't think they are original.

Re: 72 blazer 4-spd CST part out
 

Any luck on these? Are these the chanels you are talking about or are you talking about the uppers?

Re: 72 blazer 4-spd CST part out
 

CST brackets will go with the channels the pieces on the doors are stainless, do you need them or the brass or both.

Re: 72 blazer 4-spd CST part out
 

Can you post a pic of the lower pieces so I know what I'm looking for? lol. And yes if you have both sides I'd be interested in both the brass and the stainless pieces.

Re: 72 blazer 4-spd CST part out
 

Both sides are there I'll get you some pictures of everything tomorrow

Re: 72 blazer 4-spd CST part out
 

Lock out are rough, are you looking for rings and knobs or internals. I have internals already out. Antenna isn't much better, I'll try to pull tomorrow and see if it has any issues.

Re: 72 blazer 4-spd CST part out
 

Still interested in cst upper chrome channels

Re: 72 blazer 4-spd CST part out
 

Tried cleaning up the shifter today, I would say they need a rechromed to be nice.

Re: 72 blazer 4-spd CST part out
 

More

Re: 72 blazer 4-spd CST part out
 

Sorry, it only has the one bracket.

Re: 72 blazer 4-spd CST part out
 

Fine tread bolt is junk but I'll throw a couple new ones in. The only other thing is the spring that keeps the latch down is gone, I'm assuming rusted off lol. Let me know if you need anymore pictures.

Re: 72 blazer 4-spd CST part out
 

Dwayne, Thanks for the photos I will pass at this time.

Re: 72 blazer 4-spd CST part out
 

No problem, thanks for letting me know.