The new (and only) Tip & Flip cab dolly post!
 

Tip & Flip cab dolly

Build your own Tip & Flip cab dolly at home to make all your truck projects easier. I am providing very detailed set of plans pictures that will walk you thru all the needed steps to complete this project. This dolly allows your truck cab to be bolted to a sturdy frame that will hold it in its factory form and not allow it to flex or twist while you work on it. It also allows your cab to be tilted 90* in any of four positions making it easy to reach some of those hard areas. Some of the benefits that this Dolly will make easier for you are as follows.

Allows the cab to be held in a rigid easy to work on position for replacing rockers, cab corner and any rusted areas.
One person can now move the cab around your garage or work area with ease and help avoid getting any further damage from trying to move it your self when there is no one around to help.
It gives a way to store your cab while you are working on the frame or other parts.
This will also make doing body work, custom modifications, paint, sanding and polishing much easier since you can now position it to suit your needs.
The dolly can also be set at two different heights when in the standard position that puts the bottom of your rocker panels at 12” or 24”. (This may very depending on your wheel selection)
It has a built in shelve for parts or tool storage when in the standard position freeing up other valuable garage space. (So were do you keep all that chrome trim so it won’t get damaged?)

Other options that will be available for your dolly are listed below.
Plans to convert the dolly into an engine and transmission stand that could also be used to test fire that motor before installation.
Plans for mounting your truck bed that will allow it to be tilted on either side for repairs, painting or just storage.
Other plans that will allow your engine and transmission combination to be stored on the dolly with two shelves above it each for storage of a complete truck door and then ether the truck bed above it all or a 5’4” by 5’4” work table. Imagine having all that extra room while working on your project.

The plans will come with a full list of all material and hardware that you will need to buy for the construction of the Tip & Flip dolly. Also included is a full material cut list showing the size, length and type of end cut needed for each piece. Detailed photos or CAD drawings will walk you thru each step along with complete directions.

Currently plans for the 67-72 Chevy truck are available. Other models will be available for the 47-54 cab, 55-59 and 60-66 cabs to follow soon after.

Complete plans are $28.95 and this includes tax and shipping in the USA And Canada.



Click on the link below for pay pal or send Money order to
Lewis Fabrication Design Inc.
Po Box 1015 Winters
California 95694
https://www.paypal.com/cgi-bin/websc...harset=UTF%2d8

Thank you for your interest in this product.

Kevin Lewis
Lewis Fabrication Design inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

You have a pm.

Re: The new (and only) Tip & Flip cab dolly post!
 

So do you:) If needed lets move it to the 67-72 parts forum.

Thanks for your help with this.
Kevin

Re: The new (and only) Tip & Flip cab dolly post!
 

Sent you a pm

Re: The new (and only) Tip & Flip cab dolly post!
 

P.M. sent

Re: The new (and only) Tip & Flip cab dolly post!
 

P.m. sent.
Thanks,
Smiley

Re: The new (and only) Tip & Flip cab dolly post!
 

Very :cool:

Re: The new (and only) Tip & Flip cab dolly post!
 

I think you have me down for one, right?

Re: The new (and only) Tip & Flip cab dolly post!
 

I just got back from the printers and they will do a one day turn around on printing and sorting. I should have it to him on monday and I can start to ship out tuesday. I will try and have the link for PAYPAL up tonight.

Anyone using snail mail with a money order or certified check can have it made out to:

Lewis Fabrication Design inc.
Po Box 1015
Winters Ca. 95964

Please make sure you include your
Board name,
Real name,
current mailing address
phone # so I can reach you if needed.
year of truck this is for.

All orders will be sent as soon as funds clear and will be sent out standard US. mail.

Thanks again,

Kevin

Re: The new (and only) Tip & Flip cab dolly post!
 

You already have my PM :cool:

Re: The new (and only) Tip & Flip cab dolly post!
 

pm sent thanks

Re: The new (and only) Tip & Flip cab dolly post!
 

Me too! PM sent

Re: The new (and only) Tip & Flip cab dolly post!
 

PM sent. I will send a Money Order by snail mail with my mailing address. Thanks, lolife99.

Re: The new (and only) Tip & Flip cab dolly post!
 

Ok we are up and running:) The pay pal account is set up and you can buy now by clicking the link in my sig to order plans.

Or you can send payment to:
Lewis Fabrication Design inc.
Po Box 1015
Winters Ca. 95694

Please include shipping address and vehical info as well as your E-mail and board name!

Thanks for your interest in this product.

Kevin
LFD inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

would be interested in a plan for 1977 model if any are available in the future

Re: The new (and only) Tip & Flip cab dolly post!
 

Well it took about 80 hours of combined labor for the design and documention of this. Then most of this weekend putting the finishing touches on the 67-72 package and it is now ready to go to the printer on Monday for a one day turn around. I will be printing up all the lables from the current paypal buyers and should have them in the mail on tuesday. As soon as this is finished I will be starting on the 60-66 plans.

Thanks again,
Kevin
LFD inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

Just to let you all know that your plans are in the mail aand they should be showing up in a few days. 3/14/6 5pm
Thanks again and I look forward to seeing your finished product in use..

Kevin
LFD inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

does putting the check in the mail today count? :)

Re: The new (and only) Tip & Flip cab dolly post!
 

As long as the post mark is 3/13/6 you bet!

Re: The new (and only) Tip & Flip cab dolly post!
 

Just found this thread. What is the price now since I missed the deadline for the great deal you had going? I wish I would have seen it sooner. I would love to have the other plans mentioned.

Re: The new (and only) Tip & Flip cab dolly post!
 

well rats...i dropped it in the box last night and i drove by this morning to see when the last pick up was and i missed it ... >=(

Re: The new (and only) Tip & Flip cab dolly post!
 

Price is $28.95 shipped anywhere in the US. ( this covers printing, labels, postage and the 2.9% + $.30 for paypal)

Kevin Lewis
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

Does this price include the plans for the bed holder and engine rack?

Re: The new (and only) Tip & Flip cab dolly post!
 

No it is just the plans for the cab dolly. The other options will come at a later date and will be posted so people know they are available for a small fee yet to be decided.

Kevin
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

Got my plans in the mail yesterday. Couldn't be happier. Plans aren't some crude drawing, but complete parts list, pictures, good instructions.:ww:

Re: The new (and only) Tip & Flip cab dolly post!
 

Thanks for the plans, can't wait to get started.

Thanks,
Smiley

Re: The new (and only) Tip & Flip cab dolly post!
 

Ttt:)

Re: The new (and only) Tip & Flip cab dolly post!
 

hey i'm sorry but i just found this.......if i'm sending a money order out to you by snail mail.....what is the price for the plans and where do i send it to? that stand looks like it'll save me ALOT headaches!!!!! that is unbelieveable.....your an amazing fabricator

Re: The new (and only) Tip & Flip cab dolly post!
 

Rok,

Any idea how much it costs for the steel to build? (PayPal Payment sent)

Rob

Re: The new (and only) Tip & Flip cab dolly post!
 

Sorry the price is the same since I have to make a trip to the bank for deposit and then send out the plans.

Kevin
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

I belive I had $135 with wheels and misc hardware. And your plans are sent if you were one of the paypal groups from yesterday to come in.
Here is my 71 Cab bolted to its dolly ready for the media stripper! It will be so nice to be able to paint and seam seal all the spots that the factory missed:metal:

Kevin
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

Here is a new item to make things easier for everyone! The plans will be availble in a week or so! It is uded to lift off the cab or fleet side bed with only one person and an engine hoist. I will post a link when it is ready to ship. Then when you are done using it, simple slid it all inside it self and store it in a corner. It works on any standard cab with or with out glass in it. The doors do need to be removed.

Kevin
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

Wow, I will be ordering plans soon. Now if I could just learn how to weld... and buy a welder.. and find time to make this stuff. I think the timeline for my truck just got a lot longer.

Re: The new (and only) Tip & Flip cab dolly post!
 

When will the plans for the cab and fleetside bed lift be available?

Re: The new (and only) Tip & Flip cab dolly post!
 

Kevin, I just sent you the money through paypal for the tip and flip plans.
Thanks

Re: The new (and only) Tip & Flip cab dolly post!
 

Kevin, It looks like you have a winner there. Looking forward to seeing a dolly for the blazer. Being able to have the stripper (media blast) get the complete tub is the only way to go.
Thanks Dan

Re: The new (and only) Tip & Flip cab dolly post!
 

Sorry all! I have been very busy and I get easly side tracked but it was just brought to my attention that the like went when I changed over to a vendor so here it is.
67-72 Tip & Flip Cab Dolly~ https://www.paypal.com/cgi-bin/websc...harset=UTF%2d8

PS. we are sitting down right now to finish the last mods for the 55-59 dollys. Then will be the cab/bed lift and in about a week I will be pulling my 70 2wd apart for testing on the blazer 69-72 blazer Tip & Flip Dolly. It is all built but has not been tested yet. I will keep everyone posted as they are finished and ready for mailing.

Kevin
LFD Inc.

Re: The new (and only) Tip & Flip cab dolly post!
 

I thought I remembered that you were going to give us that paid by a certain date, the first wave, all new plans? Was I mistaken?

Re: The new (and only) Tip & Flip cab dolly post!
 

These are some cool tools..........are you on pirate?
Mark

Re: The new (and only) Tip & Flip cab dolly post!
 

That was for the first set that came out so I could better judge the amount to have shipped and prices for shipping and printing. I have not released and more since that:confused: It only came to a less than a $4 savings. That is what shipping and printing cost came to.

Kevin
LFD Inc.