1966 suburban slammed fuel injected 6.2L
5 Attachment(s)
bought this last spring tore it apart using porterbuilt front and rear dropmember kits weld in kit in the rear sold my bbc and decided to use a 6.2 liter ls motor out of a 2009 escalade trying to locate a 6 speed automatic 2wd trans now parts frame is almost complete now heres some pics of it so far
|
Re: 1966 suburban slammed fuel injected 6.2L
5 Attachment(s)
here is more pics of the frame getting done and the body being torn apart
|
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
heres my 6.2liter 2009 escalade motor now the hunt for a 6 speed automatic trans 6l80
|
Re: 1966 suburban slammed fuel injected 6.2L
Nice looking build. You can't go wrong with PB.
|
Re: 1966 suburban slammed fuel injected 6.2L
I'm subscrided......looks like a kool one !
|
Re: 1966 suburban slammed fuel injected 6.2L
thanks guys you guys are building some bad /// rides
|
Re: 1966 suburban slammed fuel injected 6.2L
Tuning in for this one. Looks great. :metal:
|
Re: 1966 suburban slammed fuel injected 6.2L
ought to make for one sweet sub!
|
Re: 1966 suburban slammed fuel injected 6.2L
yup! looks good nice work!
|
Re: 1966 suburban slammed fuel injected 6.2L
Very cool! I really like those slammed Suburbans.
|
Re: 1966 suburban slammed fuel injected 6.2L
ohhhh hell yeah!! keep up the good work and the pix.
|
Re: 1966 suburban slammed fuel injected 6.2L
Very cool burban!
Tony from Norcal |
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
thanks for all compliments guys heres my donor car using the rearend and wheels for rollers for now parting the rest almost got everything gone hopefully rest hits the srap yard friday its a caprice x cop car rust bucket good old michigan
|
Re: 1966 suburban slammed fuel injected 6.2L
subscribed Nice burb and engine...
|
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
2 Attachment(s)
well finally back at it againe caprice was parted out and took the rest to the scrap yard rearend ready to install then off tracked to 89 chevy with a 350 tuneport i picked up not running and did some work to and sold so know im finnally back at the suburban still looking for a 6l80e (six speed automatic)
|
Re: 1966 suburban slammed fuel injected 6.2L
Cant wait to see some more suburban progress,,,
|
Re: 1966 suburban slammed fuel injected 6.2L
is it just my eyes....or are there two different angles going on with the notches? Looks like one side goes up, the other down. Is that by design?
http://67-72chevytrucks.com/vboard/a...1&d=1282418619 |
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
good to hear....though I'm still confused....because they look different in the next pic too!?
http://67-72chevytrucks.com/vboard/a...1&d=1282418619 |
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
2 Attachment(s)
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
must be one of them thar' optical illusions.
|
Re: 1966 suburban slammed fuel injected 6.2L
Sweet :metal:
Posted via Mobile Device |
Re: 1966 suburban slammed fuel injected 6.2L
lookin good kat!
|
Re: 1966 suburban slammed fuel injected 6.2L
Man that is the weirdest optical illusion I have seen in a while. I would swear those two notches are going reverse of each other but in the side and back view, they look the same. Very weird.
Cool build!!! |
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
finally have my 6l90e recieved it yesterday from wisconsin this thing sure was heavy lifting this out of my truck hope to have the engine and trans in in the next couple of weeks before it gets to cold out
|
Re: 1966 suburban slammed fuel injected 6.2L
...at least my eyes weren't the only ones playing tricks on them!
had I stayed with computer control with all the efi hardware on my motor...I'd have had to have one of those 6speed automatics to go with it. Since I'm running ECM/TCM'less with just the MSD box...I'd have to spend a LOT of money to run one now. Oh well.....I guess just 1 overdrive gear will have to be enough. :lol: What I'd be really interested in is adding one to my TBSS at some point in the future. Hopefully it will get cheaper by then. |
Re: 1966 suburban slammed fuel injected 6.2L
2 Attachment(s)
finally getting back at it took a couple of days off work waiting for a few more parts from powder coat and the rearend getting blasted hopefully i can get the motor and trans in it next week
|
Re: 1966 suburban slammed fuel injected 6.2L
Right on C.Brown! What rear diff is that? Looking good,Keep it going!
Tony from Norcal |
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
rearend is back from the blasters brackets welded on and painted
|
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
made some more progress motor bolted in trans bolted up need to put trans mount in still and find some rims
|
Re: 1966 suburban slammed fuel injected 6.2L
lookin good kat!!!
|
Re: 1966 suburban slammed fuel injected 6.2L
wow looks awesome nice progress looks like what mine is going to look like keep up the great work!!!
|
Re: 1966 suburban slammed fuel injected 6.2L
Where did you get that trans at if been looking all over one do u have a web site?
How much did you pay if you don't mind me asking? |
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
Quote:
|
Re: 1966 suburban slammed fuel injected 6.2L
1 Attachment(s)
finally made up my mind and bought some rims and tires 20x10 and 20x8.5
|
Re: 1966 suburban slammed fuel injected 6.2L
Got some meat on that back tire, what size tires are you running?
|
All times are GMT -4. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com