![]() |
1951 long bed build
This was the truck i pulled from the weeds. All the wheels were locked up it was last licenses in 1993. Motor was free buddy had it sitting behind his shop figured it was time to do something with it.
|
Re: 1951 long bed build
2 Attachment(s)
I got it bought from him and the work started in october of last year.
|
Re: 1951 long bed build
4 Attachment(s)
Demo of the s10
|
Re: 1951 long bed build
2 Attachment(s)
Boxing the frame and extending it 28 inches
|
Re: 1951 long bed build
1 Attachment(s)
Progress came to a halt when i had a bad wreck. My buddy says never go faster then your angel can fly.... at least im still here to talk about it
|
Re: 1951 long bed build
2 Attachment(s)
Frame extension measurements if anybody is interested they fit perfect
|
Re: 1951 long bed build
Ill try to post all the pictures if my build in the next couple days. Let me know id be happy to answer any questions from my experience im not a professional builder just a guy in his garage.
|
Re: 1951 long bed build
2 Attachment(s)
Demo of the 51'
|
Re: 1951 long bed build
3 Attachment(s)
Setting bed and cab on frame
|
Re: 1951 long bed build
3 Attachment(s)
Building core support mount
|
Re: 1951 long bed build
2 Attachment(s)
Setting box height, raising bed floor and fitting running boards
If you notice the top picture is after i played with the cab shims to get the hood to close properly |
Re: 1951 long bed build
1 Attachment(s)
Purchases some chrome baby moons in craigslist. Had to set them next to the truck for kicks. Need wheel spacers to clear box.
|
Re: 1951 long bed build
3 Attachment(s)
Steering colomn and brake pedal/booster master cylinder placement
|
Re: 1951 long bed build
2 Attachment(s)
Leather seats from an astro van i have to come up with a way to mount them. I think im gonna put something over the stock seat riser then bolt it down
|
Re: 1951 long bed build
Looking Good , Nice project . How long has it taken from field to now ?
Two things I'd shorten the steering column and raise the seats so you are looking out of the center of the windshield . Keep on Trucking' :) |
Re: 1951 long bed build
Haha that all dependa on preference and being im 6'5 i dont need to raise the seat im actually seeing part of the sun visor in my vision and the steering colomn could shorten a hair but it feels good if i go much lower i hit my legs on the wheel when i sit in it. I started working in october but had to stop for a bit when i wrecked the bike.
|
Re: 1951 long bed build
Now That's what I call Progress !
Wrecking the bike , Not Good ! Wrecking yourself , Really NOT good ! :( Keep on Trucking' :) |
Re: 1951 long bed build
Quote:
|
Re: 1951 long bed build
I Really like the long beds. So rare and equally cool.
|
Re: 1951 long bed build
Well today i got the wire harmess in and mostly hooked up the good part was it turned over with the key. Just have to get fuel lines routed and extend wire harness to the fuel pump.
|
Re: 1951 long bed build
What is everybody putting for a radiator in these looking to do electric fans also?
|
Re: 1951 long bed build
Well got tranny lines and coolant lines hooked up and after starting it and letting it run have no leaks. I did have to fab a tee for piping on heater core due to the s10 factory radiator is where one of the heater core lines ran. I ended up using a 1965 mustang radiator with internal tranny cooler and electric fan setup.
|
Re: 1951 long bed build
I dig the long bed setup.
|
Re: 1951 long bed build
Mw548
Hey dude if you put a SBC between your legs, you'd better be in leathers from head to toe.. Hope no broken bones and the least amount of "road rash"!!! Fun, fun, fun build Keep on keepin on Nut Case |
Re: 1951 long bed build
5.3 waiting in the garage just not in budget yet. I also knew if i converted to 5.3 it would take me alot longer.
|
Re: 1951 long bed build
Got the bed mounts finished as well as running boards mounted yesterday. Started working on brake lines
|
Re: 1951 long bed build
I like this build. I am doing a 52' 3600 my bed isn't that long though you must have found a rare extra long bed. Very Cool build I am tagging along for sure.
|
Re: 1951 long bed build
Took the driveshaft up to the driveline shop tuesday and had them add a 27 1/2" shaft to the front and a carrier bearing. I now have a two piece driveshaft cuz of the length. I finished welding in the carrier bearing support. I also cut down the factory shift linkage and drilled a a new hole in it. I hooked up the factory shift linkage. Its a little stiff but its actually not that bad for what it is.
|
Re: 1951 long bed build
|
Re: 1951 long bed build
I like it. I also did a 51 about 30 years ago. Lifted it and sat it on a later model 4X4 chassis. Drove it for a couple years to shows and cruises.
Don't hardly ever see a long bed in these years. Good for you. Project is coming along nicely. |
Re: 1951 long bed build
http://i1173.photobucket.com/albums/...s/IMG_5370.png
Its alive and moving for the first time!! Still aways to go but def a good feeling |
Re: 1951 long bed build
hell yeah!
|
Re: 1951 long bed build
3 Attachment(s)
Well its official a little under a year and this truck is on the road. Still have a few things to tidy up but but overall I'm happy with it. I just finished wiring the led light bar in for tailights and rebuilding the steering column to fix the loose tilt. Found one of the bolts came loose and fell inside column which was causing a stiff shift linkage and random binding in steering wheel when turning. Also finished installing headlights and trying to figure out front turn signals.
|
Re: 1951 long bed build
1 Attachment(s)
Bed floor in rough still need to attach
|
Re: 1951 long bed build
My water pump was leaking and I decided to replace it. New pump made it 6 miles and the shaft snapped off damaging my radiator and cooling fan. 😡
|
Re: 1951 long bed build
1 Attachment(s)
Well with a few things left to do i started to find another project and ran across a 1930 Tudor model a that i decided to build. I know it’s a ford but i have always loved the look of the channeled model a.
|
Re: 1951 long bed build
Quote:
|
Re: 1951 long bed build
The funny part is i went the same way decided to do the truck as well but after having about 95% done on truck saw this and had to snatch it up. Got a great deal and it even had a title
|
Re: 1951 long bed build
2 Attachment(s)
Got the body set on the frame about ride height. Did a double z frame with a 4/12 drop. Been craigslisting this week picked out a unique drivetrain. Putting a 472 Cadillac big block turbo 400 trans and a rear end from a 1978 f150.
|
Re: 1951 long bed build
That Cadillac is a torque monster! Don't over rev it and it will hold together forever. There is actually a great aftermarket for them. With an aluminum intake they weigh close to a SBC.
|
All times are GMT -4. The time now is 06:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com