Parting 1966 panel truck
1 Attachment(s)
More pics coming.
Door glass $35 ea Script valve covers $35 3.73 ring gear and pinion $150 lower shock mounts $35 V8 shroud .it has 2 cracks and a small pieces missing around a bolt hole $60SOLD V8 upper rad bracket $50 SOLD Windshield trim $100SOLD Ventshades with clips $40 west coast Mirrors , pass side is cracked. $50 Gauge cluster $75 (vacuum gauge not included) SOLD Rear tail lights $50 lenses have some cracks Back up lights $50 lenses are cracked Dash piece around the radio $40 Deluxe wheel $125 I have another horn ring to go with it V8 radiator 2 core, I'm sure it needs new cores. $50 7 blade clutch fan. Not original.$50 All prices are plus shipping. the first ( I`ll take it ) gets it. |
Re: Parting 1966 panel truck
Interested in windshield trim to 54245 what shape is it in, also could you quote me a price for the upper and lower alternator brackets, thank you
|
Re: Parting 1966 panel truck
I’m interested in the custom trim. Please provide pics and cost to ship to 97304.
|
Re: Parting 1966 panel truck
5 Attachment(s)
the windshield trim has some scrapes and a few small dents , it will be this weekend before I can check shipping costs
|
Re: Parting 1966 panel truck
5 Attachment(s)
and more pics
|
Re: Parting 1966 panel truck
5 Attachment(s)
custom trim and more.
|
Re: Parting 1966 panel truck
howdy, I'm looking for a few 65 C20 parts, if your 66 is common, would you sell;
speaker working or not and all of the mounting hardware including bracket that mounts to back of AM.. I'll even take the radio if works for good price.. original choke cable knob or complete with cable original cigar lighter, workjng or not, like to have matching knob in dash heater control lever knobs original center roof mount rear view mirror and screws original driver and passenger side sill plates if not rusted through and screws carburetor if complete and rebuildable and same as 65 283 set of 4 or more rusty bedside tarp hooks please let me know if you have these available and shipping to 90744 I'll send pm with contact number if that helps, thank you! |
Re: Parting 1966 panel truck
Interested in the fan shroud. 48059 zip
|
Re: Parting 1966 panel truck
Triple grove pulley on the crank?
Power steering pump brackets? |
Re: Parting 1966 panel truck
Can I get a price on the grill and front bumper to 98264? I can't see the gril real well. How is it? and how is the bumper?
|
Re: Parting 1966 panel truck
Interested in fan shroud shipped to 08753 if it gets 2 me.
|
Re: Parting 1966 panel truck
Ventshades will take them.
Second in line for grill and front bumper, will take them. Are you selling 1). the power steering pump and pulley ( do no need the brackets) and 2). Upper alternator double bracket 2nd in-line on it- 3). Radiator side baffles 4). Bed floor strips and wood floor - will take them if for sale. Les |
Re: Parting 1966 panel truck
Hey Woody how's the longer trim piece on the driver's door (the piece after the point)? If it's cherry I'll take the set.
|
Re: Parting 1966 panel truck
I will start getting this stuff off this evening when I get in from work.
|
Re: Parting 1966 panel truck
What condition are the tail lights in?
Jimmy |
Re: Parting 1966 panel truck
3 Attachment(s)
Pictures of the grill and bumper
|
Re: Parting 1966 panel truck
will you part both rear quarters? or pieces from those areas?
|
Re: Parting 1966 panel truck
Quote:
|
Re: Parting 1966 panel truck
I just need a shipping price for each to 98264. Thanks.
|
Re: Parting 1966 panel truck
I will try to get some shipping quotes tomorrow.
Fatrat- Alt brackets $35 Killer bee- $75 for the radio with deluxe knobs and speaker, manual choke cable /knob $25 Cigar lighter , condition ? $30. Rear view mirror $25 keeping the knobs with the heater control . 1 broken lever $35 the sill plates ars rusted thru. Carb $25 no bed tarp hooks. aerotruk- the shroud is cracked in 2 places $60 plus shipping if you're still interested. $40 on the crank pulleys, one of the ps brackets is missing. |
Re: Parting 1966 panel truck
pimpston - I tried to pm you but your box is full
|
Re: Parting 1966 panel truck
Quote:
|
Re: Parting 1966 panel truck
Quote:
assuming so, I'll take the lot at your asking, I come up with $215? please try to get all of the radio speaker bracket stuff, thanks! and feel free to toss in any other loose screws, clips, knobs, etc. that a guy might need ;) please quote shipping to 90744 commercial address thanks and PM headed your way! |
Re: Parting 1966 panel truck
actually, please quote both wiper and headlight switches with knobs, and instrument cluster complete..
on the fence but right price may tip me over, lol.. thanks! |
Re: Parting 1966 panel truck
.
aerotruk- the shroud is cracked in 2 places $60 plus shipping if you're still interested. $40 on the crank pulleys, one of the ps brackets is missing.[/QUOTE] May i see pics of cracks please. |
Re: Parting 1966 panel truck
5 Attachment(s)
pics of the shroud and pulleys
pulley part numbers are 3744043 and 3751232 I`ll try to figure shipping tomorrow if your still interested. |
Re: Parting 1966 panel truck
I'll take the shroud , both pulleys.
Power steering pump bracket thats missing which one? |
Re: Parting 1966 panel truck
Is the water pump pulley a double or two singles?
|
Re: Parting 1966 panel truck
it`s missing the bracket that goes from the back of the pump to under the motor mount ( I might have one from another pump) will check on that tomorrow too. the wp pulley is 2 groove. I cant find a part #.
|
Re: Parting 1966 panel truck
Ok thanks
|
Re: Parting 1966 panel truck
That wood floor looks to be in nice shape.
|
Re: Parting 1966 panel truck
3 Attachment(s)
A few more Custom Trim pictures
|
Re: Parting 1966 panel truck
Quote:
|
Re: Parting 1966 panel truck
Thanks for the pics woody. I’m going to pass on the trim.
|
Re: Parting 1966 panel truck
Most of the anodizing is gone from it but no deep scratches. I am still trying to figure how to ship. The trim is almost 8' long
|
Re: Parting 1966 panel truck
4" Pvc drain pipe from Home Depot make for great shipping tube for moldings. USPS accepted the slight overlength as well at regular rate.
|
Re: Parting 1966 panel truck
3 Attachment(s)
Great minds think alike.
Couple more pics of the drivers door piece |
Re: Parting 1966 panel truck
Are you sure you want your mind associated to mine? Lol
|
Re: Parting 1966 panel truck
2 Attachment(s)
aerotruk, I don't have another power steering pump bracket. Here's water pump pulley and the one bracket that was on the pump . It has been welded by the hook . Are you interested in these? $40 for both.
|
Re: Parting 1966 panel truck
I'll pass on both. Have the double water pump pulley already. Will try to find a complete power steering pump setup. Thank you for your consideration and effort.
Norm |
All times are GMT -4. The time now is 10:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com