Need a little help...
3 Attachment(s)
I'm trying to wire up my cargo light that was converted to a third brake light. I mounted it to the hatch not problem. However I am having a problem going through the header panel that the hatch is attached through. I thought I could snake it through the where they hinge bolts up, but that turned out to be a closed in pocket. I even drilled through the pocket, but that was a dead end also. If you look at a the third picture with the yellow arrow there is a factory bolt in the bend of the header panel. Can someone try to snake a wire up through there to the roof? I would do it myself, but I welded it up before we did the paint work, :(. If there is access through there, I will drill it back out, but I don't want to make any holes unless I know for sure I can get a wire up to the roof. Thanks in advance.
|
Re: Need a little help...
1 Attachment(s)
Too bad on the timing. A month ago I could have snaked a camera up there on mine:
|
Re: Need a little help...
Quote:
|
Re: Need a little help...
I snaked a wire through the bolt hole and it does go into the D pillar.
|
Re: Need a little help...
Quote:
|
Re: Need a little help...
Quote:
Will it come out the overhead with the headliner removed? |
All times are GMT -4. The time now is 04:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com