1960-1972 Lowering Block U bolts
 

I have been reading countless posts concerning people not being able to get longer u bolts (at a reasonable price) when installing lowering blocks for the 60-72 Rear truck arm suspensions. Yes, we all know , if you can find a big truck spring shop, you can get a set made, as long as you know the size, length width etc. We've been stocking these so I figured I'd offer them to members. You get the longer U-bolts to accommodate a 1"-2" block with washers and nuts for $14.95 each. These will fit in a USPS flat rate envelope anywhere in the US for $5.00 shipping. I also have solid blocks in 1" 1.5" and 2" sizes.

Re: 1960-1972 Lowering Block U bolts
 

No 3" blocks huh?

Re: 1960-1972 Lowering Block U bolts
 

Thanks for offering up the U-bolts.
Like you said,... we get many members wanting them.
I'll send them your way, from now on.

Re: 1960-1972 Lowering Block U bolts
 

I can't say I've ever seen a 3" block in a truck arm application. I guess if there is enough call for it, I will start making them.

Re: 1960-1972 Lowering Block U bolts
 

3" block could run into posible scrub line problems ? Read somewhere 1.5 is the max with a 15" wheel

Re: 1960-1972 Lowering Block U bolts
 

Definite scrub line issues unless running big diameter wheels. A 1.5" block on 15's is the safe limit. They're close, but as long as you don't sling the rubber off the rim & the u-bolts don't extend beyond nuts, you'll be ok.

That being said, I've seen more than one guy use 3" blocks w/o problems. It just seems to be an un-worthy risk.

Boris, what are you getting for the blocks?

Re: 1960-1972 Lowering Block U bolts
 

Retail on them is $24pr for the 1" $32pr 1.5"
2" are $38pr. I will probably run a April special for U bolts, blocks, and hardware.

Re: 1960-1972 Lowering Block U bolts
 

I am looking to lowering my 72' C10 with 2" lowering blocks; Lowering block u-bolts, adjustable panhard bar and a pair of shock relocators.

I already have 3 inch lowered springs. I don't want to c-notch.

Please let me know when you are offering the packaged deal.

Thanks,

Frank
juiced66chevelle@aol.com

Re: 1960-1972 Lowering Block U bolts
 

Hey Boris, don't forget to send me those blocks when you get them in stock.

Mike

Re: 1960-1972 Lowering Block U bolts
 

went out today, thanks again Mike
Boris

Re: 1960-1972 Lowering Block U bolts
 

Awesome!

Re: 1960-1972 Lowering Block U bolts
 

I saw you might be running an april special. Could you PM me a price on the setup for 1.5 inch blocks and the appropriate u-bolts, nuts and washers.
Thanks
David

Re: 1960-1972 Lowering Block U bolts
 

The same thing for me as well..

thanks Al

Re: 1960-1972 Lowering Block U bolts
 

boris....can you make standard length u-bolts for a 71 rear end?? If so, how much for a pair shipped to 27596 with all washers and bolts....Thanks

Re: 1960-1972 Lowering Block U bolts
 

Yes, stock length U bolts are also in stock $14.95 each.
Geoff, yours were shipped to Jesse today.
Thanks

Re: 1960-1972 Lowering Block U bolts
 

thanks so much Boris!:D

Re: 1960-1972 Lowering Block U bolts
 

Thanks again for the quick shipping Boris....Jesse got'em Friday:D

Re: 1960-1972 Lowering Block U bolts
 

Im looking for a 1" or 1.5" drop block for a 68 c10 pickup with coil springs...

Do you have any blocks, or just U bolts? Thanks, and great prices!!

Re: 1960-1972 Lowering Block U bolts
 

Yes, we have those blocks. PM sent

Re: 1960-1972 Lowering Block U bolts
 

I need a set of 2" block U-Bolts (only the bolts, not the blocks. I stripped an end on mine).
Can you send me payment info? I can pay by Paypal.

Pm sent
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

Paypal'd the money.
Thanks

Re: 1960-1972 Lowering Block U bolts
 

And im in line for a set of 1 1/2" bolts. PAypay accepted?
Thanks

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

How much for 2" blocks, and the U-Bolts combo?

Thanks.

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

Boris,

Price for a couple 1.5" blocks with U-bolts to Roseville, CA...95678. How quick could they be shipped?

Thanks very much.....Jim

Re: 1960-1972 Lowering Block U bolts
 

PM sent, I can ship today and they would be there 2-3 days

Re: 1960-1972 Lowering Block U bolts
 

I am interested in some u bolts. Can you shoot me a pm on how to pay you?
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

pm sent
thanks

Re: 1960-1972 Lowering Block U bolts
 

I'll take a 2" bolt set.

Re: 1960-1972 Lowering Block U bolts
 

just the bolts or 2" blocks and u bolts?

Re: 1960-1972 Lowering Block U bolts
 

Sorry,

Just the bolts.
Posted via Mobile Device

Re: 1960-1972 Lowering Block U bolts
 

How much for the 2" blocks and u bolts?

Re: 1960-1972 Lowering Block U bolts
 

pm sent

Re: 1960-1972 Lowering Block U bolts
 

How much for 2" blocks and u bolts with hardware shipped to 94580? Also can you let me know payment methods you accept.

Thanks!!

Re: 1960-1972 Lowering Block U bolts
 

Re: 1960-1972 Lowering Block U bolts
 

hey man will the 2" blocks keep my shocks from bottoming out when aired out? and how much to ship to sac 95758 blocks and bolts thanks, Tony :metal:

Re: 1960-1972 Lowering Block U bolts
 

your shocks are still going to bottom out if the rear axle doesn't hit something first. $65 shipped

Re: 1960-1972 Lowering Block U bolts
 

i need a 1 inch block and bolt kit ship how much to me