Does lmc (or?) make these frame pieces?
 

Pulled my bed off today.

I need the cross members labeled 1 & 2 and also brackets 3 &4. Maybe I am missing it but ive been searching lmc for them and cant find it.

#1 is definitely toast

Maybe Im searching for the wrong words.

Thanks

Re: Does lmc (or?) make these frame pieces?
 

I have a nice used rear crossmember for $100 shipped, i might have the other one too.

Re: Does lmc (or?) make these frame pieces?
 

I have 1/2/3 on the bench and I think #4 on a parts truck out side . If you need them I can list them In the parts section . :chevy:

Re: Does lmc (or?) make these frame pieces?
 

Parts /cross members . If you need them let me know and I'll post them on the parts board . :chevy:

Re: Does lmc (or?) make these frame pieces?
 

Upon further inspection today... saw this close up. Is this all one piece? What are your suggestions to do about the rot between those layers? Need help

Re: Does lmc (or?) make these frame pieces?
 

If you have a sand blaster, the first thing you should do is clean up as much of that frame as you can. That's the best way to know what you have left to work with.

From what I can see in your pictures I would be looking for a different frame.

Re: Does lmc (or?) make these frame pieces?
 

The unfortunate thing is the front half is in great shape from what little ive seen because it was covered in oil....

I found a guy by me who might have a good 3/4T frame for 200. He said he would get back to me... Hopefully he still has it. But if not im trying to get a game plan to salvage what I have here.

Re: Does lmc (or?) make these frame pieces?
 

If you don't find one close to you I have this one that's pretty clean . :chevy:

Re: Does lmc (or?) make these frame pieces?
 

may,
there was a Yellow 71 on the facebook market place this week in Hampton I believe for around 700 bones, might be good for a parts truck or just need some TLC

Re: Does lmc (or?) make these frame pieces?
 

I would find a rolling frame,
I used to deal with a guy named Ron in western branch area, that had a back yard full of chevy parts and old Pontiac stuff too, he was a regular on craigslist . I have not seen him on in a while you might get lucky if you try looking on CL

Re: Does lmc (or?) make these frame pieces?
 

Ended up finding a great frame for 200 bucks. Looks like real light surface rust and all the mounts, cross members are in good shape. No repairs that ive seen so far. Thanks everyone.