72 GMC Sierra Grande
 

Roof Swap Does anybody have their windshield and back window,s out I need the width and length of the window opening from the pinch weld to pinch weld I don't want to go any further with my body work I had the mesurment,s written down on my A piller,s but my son has primed over them any help would be appreciated Thanks Saddletramp

Re: 72 GMC Sierra Grande
 

I can help if you can be more specific where (point to point) you want measured. Both windows?

Re: 72 GMC Sierra Grande
 

Evening Special K I need the mesurment in the middle of the A pillars across from the pinch weld, to pinch weld and from top to
The bottom also and if you can get back window to Thanks Saddletramp

Re: 72 GMC Sierra Grande
 

I have 2 cabs in my shop if you don't get what you need.

Re: 72 GMC Sierra Grande
 

Hello Man I need the mesurment of the windshield opening vertical and horizontal from the pinch weld to pinch right in the middle of the Pillars and In the middle of the roof header down to the middle of the pinch weld on the dash would be good and the back window also Thanks i really appreciate it. Saddletramp

Re: 72 GMC Sierra Grande
 

Hope this helps,
Rear window, 13 1/2" inside pinch weld top to bottom, 56 1/4' middle, 58 1/4" at the bottom.

Front windshield, 21" inside pinch weld top to bottom, 59 3/8' middle, 61 1/8 at the lower notch in the pinch weld.

Good Luck,

Re: 72 GMC Sierra Grande
 

Hey man Thank you very much that's perfect just what I needed I just want to make sure my roof swap is good before i go any further with my project.Thanks again saddletramp

Re: 72 GMC Sierra Grande
 

I see you got what you need. Cool beans! I'll be doing the same job on truck in the future. Let us know how it turns out. Or better yet, please post a thread on how you are doing it. TAKE PICTURES!!

Re: 72 GMC Sierra Grande
 

Morning Sir My 23 year old son passed away on 10/11/17 so I'm now just getting started back on my truck I will start a build thread Thanks for all the help.Saddletramp