Re: post all bagged c10 here
 

Here's mine.

Re: post all bagged c10 here
 

Man I almost feel like I shouldnt put mine on here till its completely slammed but here it is as it sits now, looks high to me after browsing thru this thread

Re: post all bagged c10 here
 

Not even close to layin frame but here is a pic of mine.

Attachment 301543


This is as low as I could go without modifying the inners fenders and bed. Basically, I have a little less than an inch of clearance from the pumpkin to the lower side of the bed and from the top of the tire to the inner fenders up front.

Re: post all bagged c10 here
 

You are correct. In the front - 73-87 style front x-member swap, 2" drop spindles with the bag cups cut down to about 1". In the rear - axle flip, de-arched leaf springs, air-over leaf bags similar to N2TRUX's and a bolt-in notch that was welded in. I set my bump stops at the height set in the picture but could get well over an inch lower with the current set-up except for the box and inner fenders getting in the way.

Re: post all bagged c10 here
 

figured i might as well throw in my project longbed.

http://i22.photobucket.com/albums/b3...9/100_0752.jpg

http://i22.photobucket.com/albums/b3...9/100_0753.jpg

Re: post all bagged c10 here
 

aint that the truth! It takes a lot f work to get em that low.

mine:

http://farm2.static.flickr.com/1220/...6ba337.jpg?v=0

Re: post all bagged c10 here
 

Here's mine. Nothing special, and also not complete :)
http://newt0.com/simplegal/galleries...2838_sized.jpg
http://newt0.com/simplegal/galleries...8123_sized.jpg

Re: post all bagged c10 here
 

I think I get the most incomplete bagged C-10 award!

http://i149.photobucket.com/albums/s...5/100_1436.jpg

Re: post all bagged c10 here
 

It's sweet, but takes a lot of time, money, & effort to get em there

Heres an update on mine
No springs in the back, but should be close to ride height for a while

http://i81.photobucket.com/albums/j2...DSCF0005-1.jpg

Re: post all bagged c10 here
 

Kyle's 67

Re: post all bagged c10 here
 

Heres mine... It doesnt get nearly as low as most with air... I built the truck with springs then decided to throw air on it and didn't want to cut it up... Its not notched into the bed and the inner fenders are still in it and its got a pretty tall tire... The one I am building now is getting hammered.... Stay tuned!

Re: post all bagged c10 here
 

Here's an old pic of my 71 project.

Re: post all bagged c10 here
 

heres minean old one

Re: post all bagged c10 here
 

centerline zooms i hope to have it rolling this comming summer

Re: post all bagged c10 here
 

Are they directional or does one side go one way & the other the opposite ???

Where in Ok are you

Re: post all bagged c10 here
 

no they are not directional wish they were in am buy muskogee 30 min south on 69 hwy( checotah ) the back spacing on the 20 5 3/4 and rear 4 3/4

Re: post all bagged c10 here
 

opps the rear ones are 22

Re: post all bagged c10 here
 

I might have a couple...;)

Re: post all bagged c10 here
 

here's mine. spindles and bags up front, blocks and bags in rear. still has fender wells up front and stock floor in rear. has a traditional frame notch, no step notch.

Re: post all bagged c10 here
 

my 67 and 68

Re: post all bagged c10 here
 

Re: post all bagged c10 here
 

Here's mine: EC Spindles, ART A-arms, slam bags up front, slam bags and c-notch out back. Still has stock wheel wells and bed floor.

Re: post all bagged c10 here
 

Does it count if it ain't finished? That is my ride height which is 5".
http://i194.photobucket.com/albums/z...rogress002.jpg

Re: post all bagged c10 here
 

here is mine.. its now 2 inches lower in the rear and has a new billit grill

Re: post all bagged c10 here
 

ok here is some new ones i just took.. on pavement and with the new grill