The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   Paint and Bodywork (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=193)
-   -   Bare metal prep (http://67-72chevytrucks.com/vboard/showthread.php?t=748976)

Drew3 10-22-2017 02:14 PM

Bare metal prep
 
Just had my truck blasted to bare metal. What should I treat it with to prevent surface rust before I can get it into the body shop?
Posted via Mobile Device

Jcfcamaro 10-22-2017 02:15 PM

Re: Bare metal prep
 
I would say epoxy primer

RodnRudy 10-22-2017 02:32 PM

Re: Bare metal prep
 
I used Dupont KWIK PREP 244S. I used a spritz bottle to spray a light film on the metal and used an air blow gun to dry it quickly. A fine mist is all that's needed. It forms a barrier on the metal to keep it from rusting.
If you can't find KWIK PREP at your paint jobber they can recommend a product that will work.

tjc 10-22-2017 03:01 PM

Re: Bare metal prep
 
what did you have it blasted with, what kind of material ?


All times are GMT -4. The time now is 01:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com