Trimming down high hump carpet
anyone trim down a high hump carpet to use for a low hump? i ordered one through rockauto for my suburban but apparently the 400 automatics are high hump? thats what i selected in the options anyways, and it looks like a high hump to me?
|
Re: Trimming down high hump carpet
1 Attachment(s)
this is my hand pressing down on the carpet in the middle of my low hump floor
|
Re: Trimming down high hump carpet
Really don’t see how it can be done without a big seam in it . And having an shop do it would most likely be more than a new one
|
Re: Trimming down high hump carpet
1 Attachment(s)
Mark is right,they mold these carpets with adhesive or whatever is on the back to hold the shape.my 72 3/4 ton truck has a high floor and a Turbo 400 and a new ACC high hump carpet.i'm sure before the carpets are molded,just laying there flat,a high hump would have to be more carpet than a low floor.trying to make it conform to a low floor would be like trying to get size 12 foot into a size 8 shoe?rather than have a mess or cut a section out of it,sell it and re-order what you need?
|
Re: Trimming down high hump carpet
Or - stuff some foam or bedding or something in there to fill the space between the carpet and floor.
Otherwise - no. You can't cut it down. K |
Re: Trimming down high hump carpet
I just go by if the hump is bolted or stamped into the floor board . What’s your look like ?
|
Re: Trimming down high hump carpet
1 Attachment(s)
I did the same thing, ordered a TH400 high hump carpet and put it in my truck which of course has a TH400 with low hump. I trusted the catalog and was burned. But I like it anyway. I put a 2x12 board on the hump (just set it there), and put the carpet in and now I have a high hump. I kind of like it, it brings my console and cup holder closer and it gave me a convenient place to screw in a fire extinguisher bracket on the passenger side of the hump.
|
Re: Trimming down high hump carpet
Call Rock Auto and ask if you can exchange it. When I ordered mine about 7 or 8 years ago I noticed the bum information on ACC or Rock Auto's website and ordered the low hump version.
Sounds like the error is still not corrected. |
Re: Trimming down high hump carpet
ya, I realized cutting it won't be the best solution. I went through the return process and apparently they can take it back and I can reorder the "3 speed automatic" which should be the low hump based on the pictures. I would just be out of $13 for the pre paid shipping label to send it back. guess that's my route I will go. I packaged it yesterday and will be dropping it off today to send it back. wish I would've tried the block of wood method, might have worked for me! building a console that goes there anyways
|
All times are GMT -4. The time now is 05:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com