Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Payment sent.
Thanks

Scott

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thanks Scott! Your bracket shipped yesterday via FEDEX!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Payment on the way
Thanks Rodney

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I got it yesterday Rodney and your bracket is on its way via USPS. Thanks again!

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Will these work in a 68 with an 2007 pedal? Thanks

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Can you post a picture of your pedal?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

ok rob im gonaa be new to this ls conversion
im getting a 2004 yukon 5.3 set up, including the pedals. how do i know if i need this plate?
its going in my 67 short stepper

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

You'll need it!!!!! :D :metal:

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Ok then bud. As your former New Mexico parts trader ;-)
What's your price?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

PM sent!

Re: Gas Pedal Adpater bracket for truck/suv pedal
 

Hello was wondering if these are still available doing a 5.3 swap out of a 05 in a 72 blazer

Re: Gas Pedal Adpater bracket for truck/suv pedal
 

Yes sir! $100 paypal robhartley@aol.com. Thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

bump!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Man. I wish I would have known about these when I did my last swap, I had to do a lot more cutting and hacking then I was happy with doing, this would have made that far far easier. Great product!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thanks! Tell all of your friends!!!!! :sexy:

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I will take one. Thanks

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Sweet! $100 shipped to you, paypal is robhartley@aol.com

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

PM sent with payment information.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Any option on these for 1965 C10? With a vette pedal

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I've never tried one of my vette pedal brackets in that year model. I know several people have modded my truck pedals to work in the 60-66s, but I'm not sure how they did it. LMK.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I would use the 2005+ corvette pedal. You can find it on ebay for - $50-$100. The pedal bracket is $50 shipped. Check out this thread it contains all the info for that pedal bracket:

http://67-72chevytrucks.com/vboard/s...d.php?t=631165

Thanks! Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

What did you decide on the pedal?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it:

http://67-72chevytrucks.com/vboard/s...d.php?t=692222
http://www.hotrodlane.cc/Streetstories/81%20swap.pdf

Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward.

The .pdf file has a complete discussion on the entire install, but here is a small snippet:

"This is the installed Pedal Position Sensor AKA Drive by Wire pedal.
I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match
than the later Silverado pedal. A couple of the wires do have to be moved as it is
internally wired different. Basically, there are three different sensors in the pedal
and the PCM compares all three of these to determine how much throttle
opening the drivers is requiring. If these three sensors do not agree, a code will
be set and the PCM takes a best guess at what the throttle opening should be.
The gray wire was moved from location A to J, the Brown wire was moved from
location E to A and the Yellow wire was moved from location J to E. I also had to
add a slot in the connector plug so it would plug into the pedal."

PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!!

Good luck with your LS Swap!!!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Ready to buy, you ready to ship? :D