The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Full time 4x4 front hub parts (https://67-72chevytrucks.com/vboard/showthread.php?t=799530)

Fishermen0105

01-13-2020 03:56 PM

Full time 4x4 front hub parts

Anybody have full time 4x4 front hub parts they could part with for a np203? Have the springs and one gear but missing the metal rings the springs sits in and a couple snap rings I think. Thanks matt

kwmech

01-14-2020 01:19 AM

Re: Full time 4x4 front hub parts

I may actually have some of that sitting around under my work bench

Fishermen0105

01-14-2020 01:11 PM

Re: Full time 4x4 front hub parts

Let me know...

kwmech

01-14-2020 10:09 PM

Re: Full time 4x4 front hub parts

OK what I saw were bolt on drive slugs for a 3/4 ton...sorry

hatzie

01-15-2020 04:38 PM

Re: Full time 4x4 front hub parts

Quote:

Originally Posted by kwmech (Post 8659975)

OK what I saw were bolt on drive slugs for a 3/4 ton...sorry

The Dana 44 on the 1/2 & 3/4 tons got slugs or hub locks depending on what transfer case was installed.

kwmech

01-17-2020 11:58 AM

Re: Full time 4x4 front hub parts

Quote:

Originally Posted by hatzie (Post 8660357)

The Dana 44 on the 1/2 & 3/4 tons got slugs or hub locks depending on what transfer case was installed.

Ummm, yes I know that. 3/4 ton --203 trucks had bolt on drive flanges if you want to get technical. Just like the 3/4 tons with the 205 had bolt on locking hubs. These replaced the locking hubs with the 203 case

hatzie

01-18-2020 01:25 PM

Re: Full time 4x4 front hub parts

Quote:

Originally Posted by kwmech (Post 8661173)

The point I was trying to make was the slug he found should get you a little closer to the parts you need for full time 4x4.

The other option is to install WARN hub locks and fix the locks in the engaged position with a set screw.

Fishermen0105

01-18-2020 01:42 PM

Re: Full time 4x4 front hub parts

Found some. Thanks

hatzie

01-18-2020 02:20 PM

Re: Full time 4x4 front hub parts

Quote:

Originally Posted by Fishermen0105 (Post 8661737)

Found some. Thanks

Excellent :two::metal::metal:

All times are GMT -4. The time now is 06:18 AM.