4wd front spring hangars
1 Attachment(s)
These are clean, not rusty, pitted or greasy, $150 shipped for the fronts.
$100 shipped for the rears. |
Re: 4wd front spring hangars
1 Attachment(s)
Pics of rear hangar mounts.
|
Re: 4wd front spring hangars
ttt
|
Re: 4wd front spring hangars
maybe interested in the rears do you have pictures
|
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
Quote:
Looking for the rear horns for a 4x4 frame after the rear ended spring hangers |
Re: 4wd front spring hangars
1 Attachment(s)
Quote:
|
Re: 4wd front spring hangars
I removed the rear spring hangars from that frame.
The other rail has a dent at the end of the top rail, can see it in the picture. Both sides had a hitch welded to the upper part as seen in the picture too. |
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
How long do you want the frame rails?
I would remove the rear crossmember for packaging, $65 for the frame cuts with the crossmember, shipping I think would be around $30. |
Re: 4wd front spring hangars
I think that should work
|
Re: 4wd front spring hangars
I need them about where that bend is about 3 to 4 inches to the left of measuring tape to the very end
|
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
Would you be willing to cut the drivers side frame rail behind the front cab mount if I took the fronts?
|
Re: 4wd front spring hangars
Quote:
The frame is already cut behind the front cab mounts and separated from the front crossmember. I will post a pic of it.... |
Re: 4wd front spring hangars
1 Attachment(s)
Frame rails
|
Re: 4wd front spring hangars
I will send you a PM randy500.
|
Re: 4wd front spring hangars
Ttt
|
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
Spring mounts still available
|
Re: 4wd front spring hangars
Are the shackle mounts for front leaf springs hangers still available? The second photo you posted.
|
Re: 4wd front spring hangars
Quote:
|
Re: 4wd front spring hangars
Not sure but did you sell the rear cross member to Krex.
Or do you have another? If so you can ship with the engine cross member I said I will take on hour other thread. Thanks Chris |
Re: 4wd front spring hangars
1 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 04:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com