1969 Chevy short stepside
2 Attachment(s)
This is my 69 C10 build. I had pictures of the truck when i first got it and the complete tear down but I lost them all. I got the truck 3 years ago and I traded a 84 Chevy short wide for it. Here is a few pics of the truck tore down.
|
Re: 1969 Chevy short stepside
3 Attachment(s)
Here is some pics of the front end. It was pretty bad. I bought a disc brake conversion kit and a 4/6 drop kit and the 5lug rear axle kit from Early classic Enterprises.
|
Re: 1969 Chevy short stepside
2 Attachment(s)
I completely disassembled the front end. Removed all the upper and lower control arm bushings, tie rod ends, steering box pit-man and idler arms. I also cleaned the grease off the control arms.
|
Re: 1969 Chevy short stepside
2 Attachment(s)
I got everything removed from the front end and cleaned the frame and painted it. I took the cross member off and cleaned it all up and painted it and then re-installed it.
|
Re: 1969 Chevy short stepside
Looking like a great start!
|
Re: 1969 Chevy short stepside
1 Attachment(s)
Painted the control arms and installed new Moog bushings. Installed the drop spindles.
|
Re: 1969 Chevy short stepside
Thanks Dustmaker. These trucks are defiantly a process and not a fast one.
|
Re: 1969 Chevy short stepside
I really wish I hadnt lost all of the pictures of the truck. I had documented everything from the day I drove it home to complete tear down.
|
Re: 1969 Chevy short stepside
1 Attachment(s)
Another pic of the front end.
|
Re: 1969 Chevy short stepside
Not sure why all my pictures are turning sideways.
|
Re: 1969 Chevy short stepside
Nice start! Looking at that cab makes my stomach feel funny though... Good luck!
|
Re: 1969 Chevy short stepside
Orange67 thats funny because I feel the same way. LOL.
|
Re: 1969 Chevy short stepside
2 Attachment(s)
Here is my donor cab. i got all the parts off of it today to put my cab back together.
|
Re: 1969 Chevy short stepside
2 Attachment(s)
Here is the pieces needed to put the cab back together. I also got the inner cowl piece but didnt take a pic of it.
|
Re: 1969 Chevy short stepside
Haha, you'll be fine. Especially with this site, the knowledge and people are amazing! Can't wait to see this come together.
|
Re: 1969 Chevy short stepside
2 Attachment(s)
Today I also got the rear end dropped and taken apart. I need to put in the 5 lug axles and then put my drop kit on the back.
|
Re: 1969 Chevy short stepside
1 Attachment(s)
axles
|
Re: 1969 Chevy short stepside
1 Attachment(s)
My front end does not have wheels on it because I bought a set of 5 lug rallye wheels but they are for drum brakes not disc. Back to the drawing board.
|
Re: 1969 Chevy short stepside
3 Attachment(s)
Today I pulled off the trailing arms and started cleaning them up. I also took the donor cab pieces and reshaped the lips and grinded everything down and then buffed off the rust. Im going to seal the back sides of everything with a rust encapsulator then I will be ready to start putting my cab back together.
|
Re: 1969 Chevy short stepside
3 Attachment(s)
a few more pictures
|
Re: 1969 Chevy short stepside
1 Attachment(s)
Just ordered my gas tank for the truck. Should have it next week.
|
Re: 1969 Chevy short stepside
I have the same fuel tank for mine.
|
Quote:
Posted via Mobile Device |
2 Attachment(s)
Tonight I got the rear end all disconnected and removed.
Posted via Mobile Device |
3 Attachment(s)
The last couple nights I have been working on my donor parts. I used some Eastwood rust converter and some encapsulator which worked really good.
Posted via Mobile Device |
All times are GMT -4. The time now is 11:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com