NP205 Transfer case tear down
 

Hello I am looking for ideas to help solve this issue.

I have watched and read about hitting the output shaft with a deadblow hammer to remove the shaft from the bearing and the assenbly comes out as a unit. I can't get the shaft to move out of the bearing. I have whacked it with the DB hammar and with a brass pin and 4 lb hand sledge. Still won't move

HELP!
_____

Re: NP205 Transfer case tear down
 

what output shaft ? front or rear ?

any pics your of the item your trying to work on ? maybe your missing a part yet .

Re: NP205 Transfer case tear down
 

sub'd

Re: NP205 Transfer case tear down
 

Here is the picture of the Transfer case.

Eldorado Jim- Help me out what is sub'd

http://67-72chevytrucks.com/attachme...?dl=1541952834

Re: NP205 Transfer case tear down
 

we know what a 205 is . plus that pic is super tiny . i asked what shaft are you trying to remove ? input / front output / rear output ? and pic of said area so we can see what you might be missing .

sub'd basicly means he is in to watch and learn and not lose the post for later searching .