big lathe & BIG METAL ROLLER
been looking for a nice lathe -missed several -i tend to have to think on every thing i buy ?? but found a 18x60 " grizzly lathe with the 3 1/8 spindle bore hole -made in 2006-fellow died & family had it for sale . seems like it sat for several yrs w/ no use ,it did come w a 3 & 4 jaw chuck,taper attachment, i would like to find a steady & follow rest, and the correct manuals , anybody know of a model like mine ?even if i could find one -i could make a copy of there steady & follow rests ?? i tried grizzly -no luck ? i guess the lathe bulider of "jet lathes " made this ,and grizzly sold several ! anyway i will post some pics later thanks
|
Re: big lathe
That's odd..I have several grizzly machines and theve always been helpful..but it being 10yrs old I'm sure it maybe obsolete..
|
Re: big lathe
i will post some pics of my big lathe soon , the weather here has been bad -and i need to find a spot to place it in my small shop,{crowded}-plus build a off loading "rack" w/ wheels to slde it around ! it weighs about 5500 #s,the weater here is rainy,foggy & cold ,at least no snow !!
|
Re: big lathe
1 Attachment(s)
got my pics of lathe -lets see if i can post them ??
|
Re: big lathe
1 Attachment(s)
that posted -NOW 1 more pic-i think the big bore hole will be nice ?? -i have run lathe -seems like it does nothing ?? w/o a owners manual -its hard to figure out what each knob does ??
|
Re: big lathe
Would I love to have a lathe that size! Some Day.
|
Re: big lathe
1 Attachment(s)
Damn that is a nice large lathe..... I just picked up a 1944 Logan 820 10" lathe. I spent 15-20 hours cleaning her up and now she works like new!!!
Before I cleaned it up. |
Re: big lathe
What a nice lathe. I would think Google could find some info on it but maybe not.
|
Re: big lathe
i got most of the "knobs & levers " figured out ! done several jobs on it -i really like it ! everything is so tight & smooth ! all my previous lathes were worn out ,you had to sneak on a size or polish it to size ,the big spindle is a very good item to have ,done a driveshaft ,it was nice to chuck it up in there ,before i had to go off spindle centers and always had length problems! like i said its "chinese made "BUT it sure is accurate!!!!!! -im thinking i will buy a read -out and a steady rest for it .the read out will make things easier to do& quicker !
|
Re: big lathe
Very nice lathe...im jealous. What did you pay for it?
|
Re: big lathe----- GOT A ROLLER BUDDY
1 Attachment(s)
just found this this metal roller -it will do 3/8 thick x 8 1/2 foot long ! it was set-up to roll hd screen wire from a 6000 # spool for concrete culverts-i cut the 2 infeed rollers & junk off it ,need to change the wiring from 440-3 phase to 240 3 phase & im ready to roll something - dozer blade repair- patches -tank repairs -bar-b- que grills - what ever! see if i can post a pic ??
|
Re: big lathe
that roller is a nice find.
|
Re: big lathe
THANKS YOU ! I JUST NEED TO FIND A 440 VOLT 3 PHASE TRANSFORMER- TO WORK WITH MY 25 HP 3 PHASE CONVERTER ! I DONT WANT TO PULL THE 7 1/2 HP 440 MOTOR / TO CHANGE TO 240 V -CANT SEEM TO FIND ANY WIRING INSTRUCTIONS/ DIAGRAMS - I DID THAT ON A SHEAR I HAD PROBLEMS -ONCE IN AWHILE & NEVER KNEW IF IT WAS SOME REWIRING PROBLEM OR ?? ALSO GOT TO GET SOME GEAR OIL GREASE- THE BLACK NASTY STUFF & RED - "LUCAS"GREASE ALL ROLLER BLOCKS -SHOULD DO A FINE JOB & BRING IN SOME EXTRA MONEY ON JOBS-ALL TO SUPPORT MY "truck habit "!
|
Re: big lathe
Any idea what the current rating is on that converter? A single phase to 3 phase converter coupled with a 240/440 transformer can be tricky. Is that a rotating converter or solid state? Probably need to do some math and make sure you aren't pushing things to the limit. That sounds pretty close to me. Don't want to let any of that valuable smoke out.
|
Re: big lathe
Way ahead of you -got my electrician buddy figuring it out,but doable he says ! Thanks for the heads up
|
Re: big lathe
might try a vfd ? anybody know of any deals on them ? with the 440v-3phase -it might work ?? my boys got one on his "pullmax" it was a head ache trying to find the right one though!
|
Re: big lathe
Wow, nice equipment you have there. Do you do work for the public or are these just for your stuff?
|
Re: big lathe
Quote:
|
Re: big lathe
Wow... that roller is way cool!
|
Re: big lathe
"diesel wrencher " if you need something done -get ahold of me ?? ive worked around these rollers for yrs -did lots of dozer blade repairs/tank sections & just guy garage stuff ! im trying to get it rewired or a vfd on it now -plus some kind of roller -up& down adjustment made - seems like it was removed from unit & was something -id like more fine adjustment in ?? it might be a few weeks ??
|
Re: big lathe
I got to see a 50 ft lathe when I was in Holland Michigan doing training at the Buhler factory. They turn the tie bars for large die cast machines.
|
Re: big lathe
1 Attachment(s)
Picture.
|
Re: big lathe
im looking for a "steady rest & follow rest for my "grizzly lathe ! probably would try to make a similiar size steady rest work ??
|
All times are GMT -4. The time now is 10:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com